2006 Mazdaspeed 6 Low Miles on 2040-cars

Auto blog

Mazda halts Mazda3 sales for fuel tank problem

Mazda is issuing a stop sale and recall on 14,406 examples of the 2015-2016 Mazda3 in the US with build dates between May 21, 2015, and August 24, 2015, due to a possible fuel leak. There are no reports or accidents or injuries from this problem. According to the company, a defective fuel shut-off valve can allow gasoline to move from the tank and fill the charcoal emissions canister. If it gets too full, there can be a leak, which obviously carries the risk of a possible fire. The engine might stall, as well. Affected owners will be notified to bring their Mazda3 in "as soon as possible." Dealers will inspect the vehicles, and if a problem is found, the fuel tank and charcoal emissions canister will be replaced. During the downtime, customers will get a free rental or loaner car, as well. Those who are particularly concerned can also call Mazda roadside assistance to have their vehicle delivered for the check and possible repair. Related Video: Mazda Issues Stop Sale and Stop Delivery for Mazda3 Fuel Tank Recall WASHINGTON, DC (October 2, 2015) – Mazda Motor Corporation will conduct a Safety and Emission Recall Campaign for certain 2015-2016 Mazda3 vehicles (built from May 21, 2015 through August 24, 2015), which could have a safety-related problem. A defect in the fuel shut-off valve may allow fuel to flow from the fuel tank into the charcoal emissions canister. With this condition, the check engine light may illuminate, and if the fuel exceeds the canister capacity, fuel leakage could occur, increasing the risk of a fire and/or engine stalling. Approximately 14,270 vehicles in the U.S. and 136 vehicles in Puerto Rico are affected. Owners of subject vehicles will be notified by mail in early October. They will be informed to bring their vehicle to the nearest Mazda dealer as soon as possible. Dealers will inspect the fuel tank to determine if the defect exists on the vehicle. If the defect exists, the dealer will replace the fuel tank and charcoal canister at no cost to the customer. A rental or loaner vehicle will be provided at no cost to the owner, until the vehicle is repaired for this concern. If there are no concerns, the vehicle will be returned to the customer. Should a customer not want to drive the vehicle to the dealership, they may contact Mazda's 24-hour Roadside Assistance service at 800-866-1998 and have the vehicle picked up and delivered to the dealership. There have been no reports of accidents or injury related to this issue.

Mazda is going to start restoring first-generation Miatas

Many of the world's premium car companies have in-house restoration shops that help provide parts and complete restorations to owners of classic models from the marques. Ferrari has one, Lamborghini has one, Mercedes-Benz has one. Now Mazda will have one, and it will be focused on the Mazda Miata, also known as the MX-5 in Europe, and the Roadster in Japan. And although some might think the Miata is too new for restoration, remember that it was launched in 1989, so it's closing in on 30 years old. Japanese Nostalgic Car broke the news of the restoration service, which will start accepting applications for restoration service this year, with the first work being done at the start of 2018. Mazda explains on its site (Google Translate is recommended) that owners of first-generation Miatas were telling the company they really wanted to restore and maintain their little convertibles for as long as they could, which is what prompted the company to pursue the service. Before offering it to customers, the company did a trial restoration of an early Miata (Roadster in Japan). Once Mazda starts restorations, it said the services will be tailored to the individual cars. In addition to restoration services, Mazda announced it will also start selling reproduction parts for first-generation Miatas. On the list of parts are new tops, Nardi wood steering wheels and shift knobs, and even the original-style Bridgestone tires. The company also said that it will add more parts later depending on which ones are most in demand. Unfortunately, according to Japanese Nostalgic Car, the service will only be available to owners in Japan for the time being. The service will also only be for first-generation models. But perhaps if the program is successful, and there's demand for other regions and generations, Mazda might expand the service. Related Video: Featured Gallery Mazda Roadster restoration View 10 Photos News Source: Japanese Nostalgic Car, MazdaImage Credit: Mazda Mazda Maintenance Convertible Performance Classics

Mazda Skyactiv-X Review | The revolution begins with a squeeze-bang

The matte black Skyactiv-X prototype looks like a rough Mazda3, perhaps reconstructed after a bad wreck by an over-enthusiastic owner of a spot welder and lots of gaffers' tape. Ribbed ducts poke out of the dash sending two breaths of conditioned air to no one in particular. Even its revolutionary engine, the thing we're here to experience, is entombed in a massive, nondescript cover to mask its unseemly noises. It's a wild, strange way to meet a very unconventional vehicle that promises diesel-like fuel economy, a wide torque band, and an exotic method for burning less gas than ever before. It takes a few hours for Mazda's engineers to explain the fundamental principles of operation. For more detail, read our Skyactiv-X Spark Controlled Compression Ignition explainer, but here's a very brief overview. Skyactiv-X marries some traditional gasoline engine characteristics with a novel form of compression ignition called SPCCI. The key for Skyactiv-X is to use very high compression in the cylinder and an extremely lean fuel-air mixture. Squeezed right to the cusp of getting hot enough to blow up all on its own (which is very hard to predict), a squirt of extra gas and a spark interject to cross that compression-ignition threshold in a controlled and predictable manner. See the animation below: That takes a few essential components to get just right. One is a massive amount of computer processing power and some pressure sensors in the individual cylinders, because the ambient conditions change how and when these things happen. Skyactiv-X uses a clutched supercharger to pump in additional air when needed to nail the mixture precisely, and high-pressure injectors to get the low ratios of fuel to disperse properly in the chamber. And since it operates like a conventional gasoline engine sometimes, it uses valve timing to lower the very high compression ratio so it doesn't reach combustion ignition in that mode. In practice, the Skyactiv-X runs in compression ignition mode most of the time. In practical terms, that means it drives like a torquey gasoline Skyactiv engine. The torque curve is broad and flat — diesel-like in that respect. That also means it can get away with using a six-speed transmission and a lower final drive for better response. There's enough grunt and economy together that Mazda can let the engine spin faster — at 60 mph, it's running at roughly 1,000 more RPM than a similar gas engine, with greater efficiency.