Mazda 3speed on 2040-cars

Auto blog

Mazda expands scope of vehicles affected by Takata airbag recall to 330k

Earlier this week a Reuters report indicated that Mazda was considering a nationwide expansion of its recall for vehicles equipped with Takata airbag inflators. The company has now confirmed said expansion, with the vehicle count jumping from 86,770 to 330,000 affected in the US. As before, the affected vehicles are Mazda6 and RX-8 cars from the 2004 to 2008 model years. Mazda reports that Takata has tested a "large number of inflators removed from Mazda vehicles" and not found any to be "non-compliant" as of yet. With that said, the company also reports in its statement that one 2005 Mazda6, located in Florida, has been identified as having had an "abnormal" deployment of the driver's side airbag. For what it's worth, though the company's statement references the Takata inflator issue as a proper recall, it is calling its own program of notification a "Safety Improvement Campaign" for the moment. Find the full, if brief, Mazda press release in the form below. UPDATED MAZDA STATEMENT REGARDING TAKATA AIRBAGS Dec 11, 2014 WASHINGTON, DC (December 11, 2014) – In addition to the actions announced on December 4, 2014, as discussed in a separate document, Mazda today announced the following steps in the Takata recall: Mazda will institute a nationwide Safety Improvement Campaign of 2004-2008 model-year Mazda6 and RX-8 models equipped with certain Takata airbag inflators. The nationwide Safety Improvement Campaign will cover the driver's-side airbag inflator, as Mazda has not made a safety defect determination at this time. This action will support us to gather additional parts for examination and to promote customer satisfaction and safety. There are approximately 330,000 vehicles included in this Safety Improvement Campaign in the United States So far, Takata has tested a large number of inflators removed from Mazda vehicles, and NONE have been found to be non-compliant at this time One vehicle – a 2005 Mazda6 located in Florida – has been identified as having experienced an abnormal driver's-side airbag deployment. Mazda has worked closely with NHTSA on this situation Mazda will participate in the independent, industry-wide joint testing program for Takata airbag inflators For history, on December 4, 2014, Mazda announced: It would expand the area of the high-temperature, high-humidity region recall to include the Gulf Coast states.

2019 Mazda Miata officially announced with 181 horsepower

It turns out the rumors and leaks are true. The 2019 Mazda MX-5 Miata will indeed get a slight performance increase. This fall, the car's naturally aspirated 2.0-liter inline-four will make 181 horsepower and 151 pound-feet of torque. That's a 26 horsepower and 3 pound-feet bump over the 2018 model. It may not sound like a lot on paper, but consider the fact that it's a nearly 17 percent increase in power in a car that weighs just 2,332 lbs. When the current ND generation debuted a few years back, the Miata actually took a slight hit to power. It was offset by a sizable weight loss program, but it didn't stop people from making a fuss. These days, it's not often that a newer model actually loses power compared to the outgoing car. The new car now makes roughly the same power as the old turbocharged Mazdaspeed MX-5 from 2004. Peak power for the 2019 model comes at 7,000 rpm while peak torque arrives at 4,000 rpm. That's 1,000 more and 600 fewer revs respectively. The Miata's redline is now 7,500 rpm, up from 6,800. It should make the car feel more lively through the rev range and should drop the car's 0-60 mph time back under 7 seconds. The 2019 model only weighs 7-pounds more than the outgoing model, so it's essentially a non-issue. In order to get the extra juice, Mazda engineers did some significant work to the engine's internals. Piston mass has been reduced 27 grams while the connecting rods are down 41 grams. The exhaust system and inner exhaust manifold have been modified to reduce pumping losses by 30 percent. The intake and fuel injectors have been changed, too. A new dual-mass flywheel replaces the single-mass unit. This should help better manage engine vibrations and responsiveness. Lastly, the final drive ratio has been increased from 3.454 to 3.583. Other gear ratios remain unchanged. There are other minor but welcome changes for 2019. The steering wheel now telescopes, a boon for drivers with long legs. The doors are easier to open and feature revised door stops. The cupholders and seat levers have both been updated. Finally, there are new 17-inch wheels and a new brown canvas soft top. How all these changes will affect the car remain to be seen. While many people have been clamoring for more power, some of us here at Autoblog feel the Miata may lose some of its current character with such a significant shift in power and torque. Either way, we're as excited as ever to get behind the wheel. Related Video:

Mazda engineer explains why there won't be a Mazdaspeed3

When Mazda put the new, beautiful Mazda3 on its stand at last year's L.A. Auto Show, it didn't take long before someone asked about a Mazdaspeed3. It took even less time for the Japanese automaker's new global boss, Akira Marumoto, to cite his company's small size and say, " [My] answer would be no." During first drives of the compact hatch last month, Road & Track asked Mazda development vehicle engineer Dave Coleman what Mazda would need in order to resurrect an MPS version. Coleman detailed a few reasons for the Mazdaspeed's continued hiatus, the prohibitive cost foremost. But another hitch is that the Mazdaspeed we'd get now isn't the Mazdaspeed enthusiasts would want. Coleman told the magazine, "If we had an engine on the shelf that would fit that properly, then we could talk." But the price to develop an engine and supporting hardware to do the car right isn't in the budget for an automaker of Mazda's size. Perhaps more important, though, present-day Mazda wouldn't — and couldn't — whip up another raw, rapid hatch. The competition, and consumers, have changed. "Even the Mazdaspeed 3, in its last iteration, came out as raw as it did due to the constraints," Coleman said, and today's market won't put up with that kind of buzzy, excitable uncouth anymore. The question is, even if Mazda had the money, do the buyers pining for a zoom-zoomier Mazda3 want the mature, composed hot hatch they'd be offered? Head over to Road & Track to read Coleman's take on the matter, and how he lays out the gap that would swallow any potential MPS as, "What you think you want is rawness. What you really want is responsiveness and directness." Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.