Alloy Wheels,mp3 Cd Player, Keyless Entry on 2040-cars

Auto blog

Mazda planning more powerful MX-5?

The new Mazda MX-5 will be available with a 1.5-liter four with 129 horsepower or 2.0-liter with 155. And while either engine may seem a tad on the small side for a sports car, they keep perfectly in line with what the Miata is all about. That doesn't mean, however, that more powerful options aren't under consideration. Speaking with Motoring.com.au at the launch of the new MX-5, Mazda's global PR chief Kudo Hidetoshi revealed that two options are under consideration. One would be a larger engine, and the other a turbocharged version of the existing 2.0. The former option would deliver the extra punch while keeping things naturally aspirated and free from turbo lag, but could throw off the weight balance Mazda has worked so hard to preserve. The more likely option, then, would be the turbocharged route that would allow the Zoom-Zoom brand to keep the roadster light and nimble, while still delivering an extra boost. Neither would be without its challenges, but if overcome, the resulting high-performance model could be sold as a Mazdaspeed model in some markets and as an MPS version in others. And, even if such a performance roadster were to get the go-ahead for production in some markets, there's no guarantee that it will be sold in the United States. Here's hoping. Related Video:

Feds investigating Mazda CX-9 over suspension problems

The National Highway Traffic Safety Administration is opening a preliminary evaluation into the 2007-2008 Mazda CX-9 because the lower ball joint in the front suspension can potentially separate while driving. An estimated 54,000 examples of the crossover might be affected. The investigation was prompted by six complaints of this happening on the road. Because the complaints are coming more rapidly as of late, NHTSA thinks the issue could be getting worse. The problem also appears to be more prevalent in states that use salt on their roads in the winter. None of the failures caused any injuries, and all but one happened at 20 miles per hour or slower. NHTSA's preliminary evaluations "assess the scope, frequency, and safety consequence" of a potential problem and can sometimes lead to recalls. Related Video: INVESTIGATION Subject : Front Suspension Ball Joint Separation Date Investigation Opened: JUN 09, 2015 Date Investigation Closed: Open NHTSA Action Number: PE15022 Component(s): SUSPENSION All Products Associated with this Investigation close Vehicle Make Model Model Year(s) MAZDA CX-9 2007-2008 Details Manufacturer: Mazda Motor Corp. SUMMARY: The Office of Defects Investigation (ODI) has received six (6) complaints (VOQs) alleging incidents of front suspension LBJ separation in MY 2007 through 2008 Mazda CX-9 vehicles. The reports appear to show an increasing trend. One of the separations allegedly occurred at 40 mph and the other 5 incidents occurred at speeds between 0 and 20 mph. The first VOQ was received in October 2013, followed by 2 reports in late 2014 and 3 reports in the first 5 months of 2015. Four of the VOQs are from states using high volumes of road salts (?salt states?) which, for purposes of this investigation, include: Connecticut, District of Columbia, Delaware, Illinois, Indiana, Iowa, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, West Virginia, and Wisconsin. The other VOQs were from northern Virginia, which borders the ?salt state? region, and South Carolina. ODI also identified EWR field report data related to the alleged defect in the subject vehicles. A preliminary investigation is being opened to assess the scope, frequency, and safety consequence of the alleged defect. The six VOQs associated with this investigation are: 10717510, 10714469, 10695142, 10668978, 10640541, and 10546535.

Sorry, rotary fans, Mazda's RX Vision probably won't happen

Mazda is doing a lot of things the right way in this age of beige-ness. It just crammed a turbocharged inline-four into the improved CX-9, a bold move unto itself, and one that should also be heartening for Mazdaspeed fans. Wouldn't that engine make for a swell Mazdaspeed3 or Mazdaspeed6? There's a reasonable ray of hope there, but not necessarily a guarantee. The RX Vision, though, is a pipe dream. Mazda is smart to keep the rotary dream alive. It's smart to keep developing it in back rooms and to keep the idea on the public's mind. Credit where credit's due: Mazda has solved some of the stickiest issues the rotary engine has, through savvy engineering and perseverance. We've seen promising patent filings for the Skyactiv-R engine, which is supposed to be found in the RX Vision concept. Mazda uses every opportunity to remind us that development is continuing and that the company would love to bring a rotary-powered sportscar to production. I believe it. But the RX Vision is just a design study. And there are some harsh realities about rotary engine emissions and fuel economy standards that are difficult for modern piston engines to achieve without expensive componentry. Emissions and fuel economy are both bugbears of the rotary, in case you've forgotten. And that explains Mazda's interest in running rotaries on hydrogen, but down that road lie infrastructure challenges as daunting as making a gasoline-powered rotary burn as clean as one of Mazda's Skyactiv piston engines. All this is meant to put Mazda's recent comments to Top Gear in context. Mazda's design director, Kevin Rice, spoke to TG at the Concorso d'Eleganza Villa D'Este, and was waving Mazda's rotary flag quite enthusiastically. "In the back rooms at Mazda, we're still developing it," Rice said, "and when the world's ready to buy another rotary, we'll be ready to provide it." I'd like that to be a comforting statement, but given the realities of fuel economy and emissions regulations and Mazda's position in the market, it seems like a hollow platitude. "When the world's ready" is just another way of saying "when we solve the fundamental issues with this engine layout, and there's an unambiguous market study that shows we can build these cars and make a profit, we'll consider it." That seems like a lot of "ifs". Perhaps Mazda does have a clean-burning, efficient, cheap-to-produce rotary running on an engine dyno in Hiroshima, and it's prepping an RX-9 for the next auto show.