2014 Mazda Mazda3 I Touring on 2040-cars

Auto blog

Mazda CX-5, Mazda6 and Mazda3 could stall due to software glitch

Mazda is recalling 262,220 vehicles due to a software error that could cause the engine to unexpectedly stall out. The recall affects 2018-2019 CX-5 crossovers, 2018-2019 Mazda6 sedans and 2019 Mazda3 models.  According to NHTSA recall No. 19V497000, which was filed June 27, a programming issue in the powertrain control module (PCM) on select Mazda vehicles could cause the engine to shut down. More specifically, "the software controlling the hydraulic valve clearance adjuster may operate improperly when transitioning from cylinder deactivation to full cylinder activation modes." This could potentially cause the intake valve rocker arm to come out of position and hit something else in the engine. If this occurs, the engine could misfire, the engine could lose power, and the Malfunction Indicator Light would be triggered. The recall affects 143,004 2018 CX-5s, 81,236 2019 CX-5s, 18,295 2018 Mazda6s, 2,551 2019 Mazda6s, and 17,134 Mazda3s. Some cars from those model years received the improved software at the factory and won't be affected by the recall. Although the first report of a related issue was chronicled in January 31, 2018, no injuries tied to the problems have been reported. Mazda is expected to start its recall on or before August 26, 2019, and will reprogram the PCM with improved hydraulic valve adjustment control programming for free. Contact Mazda at 1-800-222-5500, reference No. 3719F, for more information.

Confirmed: Mazda Miata gets more power, higher redline, telescoping wheel

Our friend over at Road & Track, Bozi Tatarevic, has a keen nose for stuff just like today's Miata news, and he spotted an article by the Japanese car magazine Car Watch that details Mazda's upcoming updates. Car Watch actually got to drive the car, too. There's a lot to go through, but the highlight has to be confirmation of what we told you earlier this year about a significant power bump: The Miata will indeed get an increase of 26 horsepower, from 155 to 181. But the power's not the whole story. Mazda has increased the redline from 6,800 RPM to 7,500. It's not clear at this point where torque and power peaks are in the rev range, or how these changes affect low-speed drivability, but more revs are almost always a good thing and aren't likely to detract from the roadster's fundamental goodness. Car Watch reports that lighter pistons and connecting rods are fitted to help reduce rotational mass in the 2.0-liter inline-four. Some valvetrain changes were needed to support the higher redline, mainly stiffer valvesprings to prevent valve float. Mazda also changed the shape of the valves and optimized the intake ports to breathe better at higher RPM. The inner diameter of the exhaust ports were increased to flow better through a new muffler better tuned to the engine's new operating range. This confirms and gives a little more detail to what we reported earlier based on a leaked document from Mazda Canada. Car Watch also confirms that the revised Miata will get a low-inertia dual-mass flywheel, which should help absorb some vibration, noise and harshness from the higher-revving engine without losing too much of the directness that a single-mass flywheel provides. Mazda usually gets stuff like this right, so while we won't know until we get a chance to drive it whether the DMF feels "right," we're not too worried about it. There's also a telescopic steering wheel, a first in any Miata, which has a range of about 1.1 inches. That doesn't sound like much, but it should help folks with longer legs reach the wheel without having to crank the seat forward. Interestingly, Car Watch reports that the telescoping wheel was opposed by some in the company seeking to save every fraction of an ounce of weight, and to get it through, the company apparently had to change some of the material in the upper steering column from steel to aluminum to satisfy the weight-conscious. Little details like these are fantastic.

Mazda CX-5 diesel gets EPA fuel economy ratings

Mazda has been promising that it will bring the Skyactiv-D diesel engine to the United States pretty much since the last Mazda6 redesign for the 2014 model year. And even in the wake of delay after delay, the company has insisted it will happen. Well, it looks like we may not be far from the fulfillment of this promise, since the EPA and DOT's FuelEconomy.gov website now has numbers for the diesel-powered Mazda CX-5. What's surprising, besides the existence of hard numbers, is that those numbers aren't actually that big of an improvement over the gas engine. In fact, highway numbers are the same as the gasoline versions. The front-drive CX-5 diesel gets 31 mpg on the highway, and the all-wheel-drive one gets 30 on the highway. The diesel does see improvements in the city. The front-drive model gets 28 mpg versus 25 for the gas equivalent. The all-wheel-drive model gets 27 mpg rather than 24 for the gasoline version. Also concerning is the fact that the CX-5 diesel isn't the only diesel in the segment. The Chevy Equinox is available with a diesel, too, and while city mpg is about the same, it can hit 38 mpg with all-wheel-drive and 39 with front-drive on the highway. With this in mind, Mazda will probably market the engine as more of a performance upgrade, and maybe something with a bit of extra towing capacity. This is because the engine is expected to make a bit over 170 horsepower and 310 pound-feet of torque. The power number is a smidge below that of the 187 from the 2.5-liter naturally aspirated gas engine, but the torque number is much higher than the gas engine's 186 pound-feet. We've also reached out to Mazda for comment on this development. A representative offered no further comment beyond the company staying committed to diesels. Related Video: