2014 Mazda Mazda3 I Sv on 2040-cars

Auto blog

Mazda CX-30 Luggage Test | How much cargo space?

The Mazda CX-30 is pretty much a lifted Mazda3 hatchback. Same platform, awfully similar dimensions, and the interior's a spitting image (if not identical). Ditto cargo capacity. On paper, the two have virtually the same amount of space behind their raised back seats, with the CX-30 at 20.2 cubic-feet and the 3 with just a teensy less at 20.1.  Now, before I go any further, let's see how much that 20.1 cubic-feet relates to in the Mazda3. I wasn't yet doing this test format back then, hence the video.  For reference, both tests used my standard luggage selection of two midsize roller suitcases that would need to be checked in at the airport (26 inches long, 16 wide, 11 deep), two roll-aboard suitcases that just barely fit in the overhead (24L x 15W x 10D), and one smaller roll-aboard that fits easily (23L x 15W x 10D). The bag of baseballs shown in the video is slightly smaller than my new small-bag go-to, my wife's fancy blue overnight bag (21L x 12W x 12D). So, the mark to beat is therefore all the bags minus the smallest roller.  Here is what 20.2 cubic feet looks like in the CX-30. To move beyond the Mazda3 comparison, that figure is in keeping with the CX-30's niche placement between subcompact (the teens) and compact SUVs (upper 20s to upper 30s). The Mazda CX-5 has 30.9 cubic-feet.  Now, typically, I start off by seeing how much I can fit inside with the cargo cover in place. Sadly, this particular CX-30's cargo cover is missing. We'll just have to hope it doesn't rob the CX-30 of as much space as the CX-5's does.  First off, it's immediately noticed that the CX-30's cargo area is not as long as the 3 hatchback's. The largest bag just barely squeezed inside, whereas there was some room to spare in the 3. Now, let's keep loading.  Whattya know? All of the roller bags fit inside. That includes the smallest one, which didn't fit in the 3, fitting atop the stack with perhaps 30% of it over the back seat line. Now, I could've done the same Tetris stack in the 3, but I'm virtually certain the hatch wouldn't have closed. Advantage, then, to the CX-30 and its extra height.  And surprise, the fancy bag also fits. Technically. It robs rear visibility, is pretty far above the seat line and it just barely fits under the back light. If it was filled, I have my doubts about its inclusion. Nevertheless, with or without it, there's still a bit more space on the right side for that bag of baseballs.  Now let's discuss the power liftgate.

Reminder: Come hang out with Autoblog and the 2016 Mazda MX-5 Miata on Tuesday, May 19

Do you love chilidogs, French fries, meeting new friends, and the world's most popular convertible? Do you live in Southeast Michigan? Do you like lists of questions? If you answered "yes" to any but the last of those, we'd like to invite you to a little get-together we're hosting next week. Driving impressions are still under embargo for the US-spec 2016 Mazda MX-5 Miata, but somehow we've conned convinced company PR reps to show the car to you, Joe Public Autoblog Reader. We're enthused about telling you more about the ND Miata, but before we do we'd love to share a Coke and talk about cars. Here's the skinny. A group of Autobloggers will be hanging out at the Athens Coney Island, in Royal Oak, MI, next Tuesday, May 19. We'll have the car on display from 5:00 PM to 8:00 PM, and we'd love to see you. If you're a Miata owner, we'd also love to for you to bring your car along for the party. The more convertibles the better (just be prepared to have your picture taken). Go ahead and set your navi for Athens – 32657 Woodward Ave., Royal Oak, MI 48073 ­– and we'll look forward to seeing you Tuesday. Mazda Geeks unite. Related Video:

Mazda RX-Vision Concept revives the rotary

Mazda continues fighting to keep the rotary alive, and with the RX-Vision concept at the 2015 Tokyo Motor Show, the company unveils its dream for the engine's revival in a curvaceous sports coupe. Before any fans burst with excitement at the prospect, Mazda only "hopes" to have this gorgeous shape available in showrooms someday, for now. The RX-Vision starts with the classic elements of a front-engine, rear-wheel drive sports coupe by combining a long, low hood, short rear deck, and a passenger compartment way at the back. From there, Mazda's stylists add the swooping touches of the brand's Kodo design language. The result looks thoroughly modern and still subtly evokes generations of the RX-7 in the sculpted fenders and flowing roofline. Under that shapely hood hides Mazda's next-generation rotary, which the company has dubbed the Skyactiv-R. Unfortunately, details about it are quite scarce at the moment, including the displacement or even the number of rotors the engine uses. Still, Mazda is abundantly clear that development of the mill is very much moving forward. Mazda's designers opt for a retro flair inside with the deeply dished steering wheel and gauges in three pods. The rest is simple and elegant with a minimalist, metal gearshift rising from the center console and leather straps for door pulls. Finishing things off is a clean mix of red and black upholstery with a little carbon fiber for contrast. Expect live shots from Tokyo soon to show how the RX-Vision looks under the lights. Related Video: Mazda Reveals Mazda RX-VISION Concept -- Powered by next-generation rotary engine SKYACTIV-R, represents Mazda's vision of the future -- HIROSHIMA, Japan—Mazda Motor Corporation unveiled the rotary-powered Mazda RX-VISION sports car concept at the Tokyo Motor Show*1 today. The rotary engine is a symbol of the company's "never-stop-challenging" spirit. RX-VISION represents a vision of the future that Mazda hopes to one day make into reality; a front-engine, rear-wheel drive sports car with exquisite, KODO design-based proportions only Mazda could envision, and powered by the next-generation SKYACTIV-R rotary engine. Rotary engines feature a unique construction, generating power through the rotational motion of a triangular rotor. Overcoming numerous technical difficulties, Mazda succeeded in commercializing the rotary engine, fitting it in the Cosmo Sport (known as Mazda 110S overseas) in 1967.