2014 Mazda Mazda3 I Sport on 2040-cars

Auto blog

Japanese automakers ramping production for renewed American sales

The 2011 earthquake and tsunami that struck Japan took quite the toll on the automotive industry in that nation. Not content to lean on that tragedy as excuse for slagging sales, the Japanese automakers are planning on a major production expansion in North America. The aim is to reclaim the market share lost from the Tsunami-based dip, and overcome a dollar/yen exchange rate that makes exporting to America unprofitable.
Following the Tsunami, Japanese automakers ramped up production in their North American facilities to compensate, but according to Automotive News, Nissan, Honda and others have all reported plans for still-further increased production in the year ahead. As part of this ramp-up, Mazda will open a facility in Salamnca, Mexico before March of 2014. Part of that increase in output is 50,000 units of a Toyota-badged compact car, which Mazda will produce.
Other Mexican production facilities opening include a Honda plant, which will open in Spring 2014 in Celaya, and a Nissan plant, set to open later this year in Aguascalientes. Nissan also said that it will need another plant in North America within the next five years. According to Nissan Boss Carlos Ghosn, the company aims to raise its stake in the US market from 8 percent to 10, and adding production will help achieve that goal. Even Mitsubishi is aiming to boost production at its Normal, Illinois plant. Production of the Outlander Sport is currently at 50,000, which Mitsubishi wants to raise to 70,000.

Massive Airbag Recall Affects Seven Automakers

The recall of faulty airbag inflators supplied by Takata has exploded today to grow to seven automakers. In most cases, only models in certain high-humidity regions were affected because the National Highway Traffic Safety Administration found in its investigation that moisture played a role in determining whether there would be a problem. However, some companies opted for national campaigns. The exact number of affected models for these campaigns isn't yet known at this time. BMW is recalling an undisclosed number of 325i, 325Xi, 330i and 330Xi models from the 2001 through 2005 model years and the 2001-2006 model year versions of the 325Ci and 330Ci for the driver side and passenger side inflators. Only vehicles currently registered in Florida, Puerto Rico, Hawaii and the US Virgin Islands are covered under this recall. Neither Chrysler's filing with NHTSA nor its press release list the specific models affected, but a company spokesperson told Autoblog that at this time it only covers the driver and passenger side inflators for the 2006 Dodge Charger in Florida, Puerto Rico, Hawaii and the US Virgin Islands In most cases, only models in certain high-humidity regions were affected because the NHTSA found that moisture played a roll in determining if there would be a problem. Ford is recalling an estimated 58,669 cars that include the 2005-2006 model years of the Ford GT for the driver and passenger inflators, the 2007-2007 model years of the Mustang for the driver side and 2004 Ranger for the passenger side. It covers vehicles originally sold or currently registered in, wait for it... Florida, Puerto Rico, Hawaii and the US Virgin Islands. Honda is issuing three separate recalls regarding the problem. First, the company is recalling the 2002-2003 model years Civic, CR-V and Odyssey and the 2003 model year of the Accord, Element, Pilot and Acura MDX to replace the passenger's side inflator. This covers all models nationwide. Second, Honda is repairing the passenger's side airbag inflator in the 2003-2005 Accord, Civic, CR-V, Element, Pilot, the 2003-2004 model year versions of the Odyssey, the 2003-2005 model year Acura MDX and 2005 Acura RL. However, only for vehicles located in Alabama, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico and the US Virgin Islands. Owners will be notified in July. Finally, Honda is separately replacing some models' driver's side inflators.

Mazda RT24-P brings KODO style to the Rolex 24 at Daytona

In addition to its new CX-5 crossover, Mazda revealed its new racecar, the RT24-P, at the Los Angeles Auto Show. The car has been designed for the Daytona Prototype international (DPi) class in IMSA's WeatherTech SportsCar Championship and will make its racing debut at the Rolex 24 at Daytona. It was designed using Mazda's KODO design language, which the brand has so successfully applied to its road-going cars. The racer's relation to Mazda's production cars is made obvious by the small five-point grille at the tip of the RT24-P's nose. While plenty of credit needs to go to the stylists and aerodynamicists at Mazda and Multimatic, one of the companies Mazda partnered with on the car, some of the credit needs to go to IMSA's new DPi rules for 2017. The new DPi class is very similar to the LMP2 class that it competes with in the WeatherTech series, with some noteworthy differences. The DPi class allows manufacturers to create unique bodies and engine packages for one of the four chassis available. The LMP2 class requires competitors to use the chassis companies' bodies, and are restricted to one engine package. View 14 Photos As for the powertrain, the Mazda RT24-P uses a turbocharged 2.0-liter four-cylinder that puts out roughly 600 horsepower. Mazda used the same engine in its P2-class race car last season. Mazda's body and engine will ride atop a chassis developed by Riley Technologies and Multimatic. You may remember that latter company as the one that developed the awesome spool valve shocks on the Chevrolet Colorado ZR2. The RT24-P will be campaigned by Speedsource, a company that has been racing Mazdas in American endurance racing for years, including last year's P2 cars. Considering Mazda's success in making such a cool race car, we're excited to see what other manufacturers do with the extra design freedom of the DPi class. Both Chevrolet and Ford competed last year in the WeatherTech prototype class with Daytona Prototype-style cars, and Honda competed with an LMP-style racer. Depending on what other makes decide, this year's WeatherTech line-up could have some nifty designs. Related Video: Related Gallery 2017 Mazda RT24-P race car View 9 Photos News Source: Mazda, IMSAImage Credit: Live photos copyright 2016 Drew Phillips / Autoblog Motorsports LA Auto Show Mazda Racing Vehicles Videos Original Video 2016 LA Auto Show