2012 Mazda Mazda3 4-door I Touring Silver 6-speed Automatic Skyactiv Technology on 2040-cars

Auto blog

Five automakers now being investigated by NHTSA for airbag woes

It appears that Toyota's renotification to owners of recalled vehicles from last year is just the tip of the iceberg for what could potentially be a much larger industry-wide recall. The National Highway Traffic Safety Administration is opening a preliminary evaluation investigation into roughly 1.1 million vehicles from Chrysler, Honda, Mazda, Nissan, Toyota and parts supplier Takata regarding faulty airbag inflators in several models.
NHTSA has received six reports - three directly, two from Takata and one from Toyota - of vehicles with ruptured airbag inflators from 2002-2006, which resulted in three injuries. So far, all six incidents have occurred in high humidity areas like Florida and Puerto Rico. According to Toyota's latest recall announcement, the inflators may have an improper propellant that could cause it to rupture in a crash and the bag to deploy abnormally.
This new investigation follows a previous recall from April 2013 of about 3.4 million vehicles worldwide for the airbag inflators from Takata. As Autoblog reported, Toyota jumpstarted the new situation when it found that the original list of serial numbers for the faulty part was incomplete and discovered more cars in need of replacement. Honda and Nissan told us that they were investigating whether further models would need called in again as well. Mazda told Autoblog: "Regarding the current Takata situation, we're working closely with NHTSA and investigating the situation, but nothing else to report at this time." Chrysler Group responded to us with the statement: "Chrysler Group engineers are conducting the appropriate analysis. The Company will cooperate fully with the National Highway Traffic Administration."

Crash test videos show how rust compromises safety

These recently released Swedish videos serve as a reminder that rust isn't just a cosmetic flaw, when it comes to cars. The insurance company Folksam and the homeowner organization Villaagarnas Riksforbund gathered examples of two relatively popular, but by now rusty cars, and then performed crash tests with them at the Thatcham Research facility in Britain. The results are sobering. The rustier cars chosen for the tests were first-generation Mazda6s, cars that have a reputation for early-onset rust in salty surroundings, such as the Nordic countries in Europe or the Salt Belt in the U.S. The cars in the other end of the spectrum were fifth-generation Volkswagen Golfs, which thanks to their body treatment only really start to show rust at over ten years old. But rust isn't just on the surface, it goes bone deep. While the Mazda did decently well in Euro NCAP testing as a new car, there's now a 20 percent higher risk of death in the 2003-2008 Mazda due to the degradation of its bodyshell. In the rusty car, the chassis rail separates from the floor, the footwell ruptures, the sill gives way, the seat mountings move and the dummy's head hits the B-pillar; all important failures, despite Thatcham saying the cars actually performed better in the crashes than they expected with all the rust. But still, the corroded structure isn't able to transmit loads in the way it was originally designed to do. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. The Golf does significantly better — despite rust flakes flying when the Golf hits the wall — as the years have only caused it to lose a single point. An important thing to remember is that the cars aren't tested in comparison to corresponding new, 2018 cars: the tests are in reference to the crashworthiness standards in place when they were new. The cars' airbags inflate like they were supposed to, but on the Mazda the dummy's head bottoms out the airbag due to the car's structure failing, meaning the airbag cannot perform as designed. Driven cautiously, an older car is still mostly fine for driving around. But tests like these remind us that it's not enough that a car runs and drives, if the body has turned into Swedish knackebrod. And if you repair the visible rust and the structure underneath remains as compromised as ever, there's an ugly truth under all the bondo. Perhaps it isn't such a bad idea to have yearly roadworthiness inspections.

2019 Mazda 3 recalled because the wheels could fall off while driving

Here’s a recall we had to read twice before believing. Mazda is bringing in 25,003 Mazda 3s that just rolled off the assembly line, because the wheels may fall off while driving. All the Mazda 3s are 2019 model year cars, so itÂ’s only the totally new generation Mazda 3 under the gun here. Thankfully, Mazda says there are no cases of this occurring to owners, and therefore no injuries or deaths related to the issue. As for the cause of the wheel detachment? Mazda put out a statement explaining the issue at hand.  “A manufacturing process error may result in a gap between the wheel hub bolt and hub flange during assembly. This gap causes loosening of the lug nuts though they were initially tightened to the correct specification at the plant. A rattling noise occurs prior to a wheel detachment from the vehicle,” Mazda says. ItÂ’s heartening to see Mazda did in fact tighten the lugs at the factory, but still extremely troubling to see that they can loosen all on their own. Our advice? Walk on out to your shiny, new Mazda 3 and torque those lugs to spec. If you donÂ’t have a torque wrench, then just use the wrench that came with the car to make sure theyÂ’re not loose. Those that have a new Mazda 3 should be on the lookout for a recall notice in the mail. YouÂ’ll then be able to take the car to the dealer for Mazda to fix the problem. Until then, just keep an eye on your lugs. A wheel flying off while driving at speed is always a recipe for disaster, and we sure do enjoy driving the new Mazda 3 at speed.