2012 Black Mazda3! on 2040-cars

Auto blog

2016 Mazda MX-5 Miata first in-car observations

We've had few days to digest the all-new 2016 Mazda MX-5 Miata since the roadster was first revealed on Wednesday evening when we offered you our first impressions. Since that time, we've gone back and looked at the car a number of times in person here in California, and we've even seen it briefly run under its own power (okay, it was more of a saunter). What we didn't get the chance to do at the reveal, however, was sit inside the car. We've since been able to remedy that, and while we haven't been allowed to drive the new roadster, we do have some initial in-car impressions to share with you.
First, the location and feel of the major controls is quite excellent. The three-spoke steering wheel is an MX-5 specific item - it's not shared with any other Mazda. That's vital, because others would likely be too big in diameter or have the wrong rim thickness. The wheel's redundant controls seem to be well laid out and the airbag boss is very small. The column tilts, but unfortunately and somewhat inexplicably, it still doesn't telescope.
Pedals are well-spaced, and the six-speed manual has the same short throws and positive engagement that we've come to know and love.

What a 181-horsepower 2019 Mazda MX-5 Miata means for us, and you

Last month, we reported on a VIN filing dug up by Road & Track that showed that the 2019 Mazda MX-5 Miata's 2.0-liter Skyactiv-G engine would get a power bump, from 155 to 181 net horsepower. As for how the 2019 Miata would make that extra power, we heard rumors it'd utilize a new cylinder head allowing higher revs, accounting for that extra power. Now we have what appears to be a leaked document from Mazda Canada showing exactly where that extra power comes from. According to the document posted at Miata.net (registration required to see the image), Mazda will alter camshaft lift and valve size on both the intake and exhaust side, fit freer-flowing exhaust, and smooth and enlarge the piping on the air intake side. There are also internal engine modifications: lighter pistons with lower crowns for better swirl in the combustion chamber, lighter connecting rods, and a crankshaft balanced for higher-RPM operation. All those extra revs mean extra vibration and noise, so Mazda will ditch the single-mass flywheel for a "low-inertia" dual-mass flywheel – which will attempt to find a nice balance between DMF damping action and SMF directness. Overall, it's a pretty serious engine revision with some driveline changes that will heavily affect the driving characteristics of a fantastic driver's car. Contributing Editor James Riswick and Senior Editor Alex Kierstein, both well versed in Miatas past and present, are here to analyze what this could mean for the little roadster. James Riswick: I don't know much about them lighter crank combustion rods, but I for one welcome the news of more power to the Miata. The jump from 155 to 181 seems like a very prudent Mazda-like thing to do, accomplishing that task through various aforementioned technical wizardry as opposed to slapping on a turbocharger, exclaiming "yee-hah" and calling it a day. Alex Kierstein: That's true. I'm wary of additional power, but you do make a good point that at least this is the right way to do it. Going all-motor will keep the bright responsiveness of the engine intact. But higher revs might make power delivery peakier. Frankly, I'd be ok with moving the torque and horsepower peaks up a bit in the rev range, making it a bit more work to access the engine's sweet spot. The dual-mass flywheel should also help if low-end torque suffers, so less stalling in traffic. JR: Did wonders in the 911 and 718s.

2015 Mazda3 shows its shape

Mazda's new Kodo design language is set to quickly spread across the automaker's entire lineup, judging by these spy shots of the next-generation Mazda3 that show some very familiar styling cues. No matter, we're impressed with what Mazda has done on the CX-5 crossover and Mazda6 sedan in terms of design, and we're happy to see the C-segment hatchback ditching the smile-for-a-mile Nagare design.
It's unclear what sort of architecture is found below the new Mazda3 - our spy shooters suggest that the car could simply be using a heavily massaged version of the Ford C1 platform found under the current car. Our best guess is that it's actually a reworked version of the platform used in the CX-5 crossover, however, chocked full of weight-saving Skyactiv technologies. After all, the CX-5 plays in the compact CUV segment, and those vehicles are commonly based on C-segment platforms. And besides, there's probably some economic savings at work with the new chassis - both in terms of fuel efficiency and economies of scale. Still, no one is totally certain what lies under all that black-and-white paper at the moment.
The new Mazda3 is targeted to arrive for the 2015 model year, meaning we could see a final production car debut as early as this year. We expect the hatch you see here to debut along with a traditional four-door sedan, and unless we hear otherwise, we don't doubt that a Mazdaspeed version will be far behind.