2011 Mazda Mazda3 S Sport on 2040-cars

Auto blog

Feds investigating Mazda CX-9 over suspension problems

The National Highway Traffic Safety Administration is opening a preliminary evaluation into the 2007-2008 Mazda CX-9 because the lower ball joint in the front suspension can potentially separate while driving. An estimated 54,000 examples of the crossover might be affected. The investigation was prompted by six complaints of this happening on the road. Because the complaints are coming more rapidly as of late, NHTSA thinks the issue could be getting worse. The problem also appears to be more prevalent in states that use salt on their roads in the winter. None of the failures caused any injuries, and all but one happened at 20 miles per hour or slower. NHTSA's preliminary evaluations "assess the scope, frequency, and safety consequence" of a potential problem and can sometimes lead to recalls. Related Video: INVESTIGATION Subject : Front Suspension Ball Joint Separation Date Investigation Opened: JUN 09, 2015 Date Investigation Closed: Open NHTSA Action Number: PE15022 Component(s): SUSPENSION All Products Associated with this Investigation close Vehicle Make Model Model Year(s) MAZDA CX-9 2007-2008 Details Manufacturer: Mazda Motor Corp. SUMMARY: The Office of Defects Investigation (ODI) has received six (6) complaints (VOQs) alleging incidents of front suspension LBJ separation in MY 2007 through 2008 Mazda CX-9 vehicles. The reports appear to show an increasing trend. One of the separations allegedly occurred at 40 mph and the other 5 incidents occurred at speeds between 0 and 20 mph. The first VOQ was received in October 2013, followed by 2 reports in late 2014 and 3 reports in the first 5 months of 2015. Four of the VOQs are from states using high volumes of road salts (?salt states?) which, for purposes of this investigation, include: Connecticut, District of Columbia, Delaware, Illinois, Indiana, Iowa, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, West Virginia, and Wisconsin. The other VOQs were from northern Virginia, which borders the ?salt state? region, and South Carolina. ODI also identified EWR field report data related to the alleged defect in the subject vehicles. A preliminary investigation is being opened to assess the scope, frequency, and safety consequence of the alleged defect. The six VOQs associated with this investigation are: 10717510, 10714469, 10695142, 10668978, 10640541, and 10546535.

Mazda CX-6: How a wagon could sell better than the Mazda6

There is no Mazda CX-6. It doesn't exist, nor have we talked to anyone at Mazda about its existence. However, let me now say that there SHOULD be a Mazda CX-6, or to put it another way, a Mazda6 Wagon that's been Allroad-ified with a modestly raised suspension, plastic body cladding and all-wheel drive. You know, the way Americans prefer their wagons. During the Regal TourX launch, Buick's product planning folks pointed out that such a crossover wagon (let's go with that term for now) filled a market niche that's really not being satisfied. One that's more stylish and luxurious than a Subaru Outback, but more functional and less expensive than an Audi Allroad. It would cater to people who seek something different from the norm, both in terms of brand and body style. Sure, it's certainly not a big market niche, but it is seemingly growing. Well, if Buick is indeed onto something and that growth continues, then Mazda could most definitely go after that same market niche. Sure, it's a small niche, but all three Mazda6 generations have sold in such minuscule numbers (33,402 in 2017), why not try something completely different? I could easily see a CX-6 outselling its sedan sibling. Such a Mazda crossover wagon would only have a Buick and Subaru as competition, as opposed to trying to draw customers away from the Honda Accord, Toyota Camry and every other midsize sedan at a time when the entire segment is hemorrhaging sales. It would also nicely complement a lineup of crossovers that includes the CX-3, CX-5 and CX-9, providing yet another alternative to entice customers. View 30 Photos Let me also say that, having driven both the Regal TourX and a Mazda6, that the two could be cross-shopped. I'd argue the Mazda actually has a more luxurious cabin than the supposedly "premium" Regal, while Mazda's new turbocharged 2.5-liter (250 horsepower, 310 pound-feet of torque) outdoes the Buick's potent 2.0-liter. Meanwhile, the Mazda6's standard, naturally aspirated 2.5-liter (184 hp, 185 lb-ft) should offer comparable fuel economy as the Subaru Outback (28 mpg combined) without making you suffer through a CVT. Now, as for adding all-wheel drive, the Japanese market version of both the sedan and wagon (known as the Atenza) can apparently be had with it. Can it be packaged with the turbocharged engine? That's another question, but all the other pieces are seemingly in place to bring the Mazda6 wagon to the United States.

Mazda RX-9 could be a 400-hp, 2,900-pound coupe due in 2019

Mazda poured fuel on the white-hot rumors of an RX-8 successor with the RX-Vision earlier this year. The long, low rotary-powered coupe was lovely, but as we reported, it wasn't going to happen. But now, there's another chapter in the RX rumormill, and like overnight parts, it's from Japan. Japanese site Holiday Auto claims that Mazda will debut the so-called RX-9 at the 2019 Tokyo Motor Show. But before that happens, the Zoom-Zoom company will preview the production model with a concept at next year's Tokyo Motor Show. 2017 is important, marking 50 years since Felix Wankel had the screwy idea for his eponymous engine and 40 years after the company's first rotary powered car, the Cosmo, hit the market. Exciting as Holiday Auto's report is, the stats on this long-rumored car are better – via Google Translate, the Japanese site claims the RX-9 will use a 1.6-liter, two-rotor Wankel with a single turbocharger. It's good for around 400 horsepower. Holiday Auto isn't exaggerating when it claims the car could have "bike-like acceleration." As with other Mazda products, a low curb weight is key, which is why engineers are targeting a meager 1,300 kilograms (2,866 pounds) for the production model – that weight should be pretty evenly split, too, thanks to a rear transaxle. So yes, the RX-9 will be stupid fast and extremely agile. But it will come at a cost. And by cost, we mean that the RX-9 will start just south of eight million yen. That's $79,641 at today's rates, or enough to purchase about 2.5 RX-8 R3s, the hardcore handling trim of Mazda's last-gen rotary car. And if Mazda follows Nissan's GT-R pricing model, we'll see a six-figure RX-9 by 2025. When it comes to Mazda rotary rumors, grains of salt are a must. That's doubly true when we're talking about a possible concept that won't debut for over a year. But with the RX-Vision, Mazda showed that it hasn't abandoned rotary power, and with 2017 marking a big anniversary for the technology, it seems unlikely that the company will let the date pass without some acknowledgement. A concept car seems like a solid bet. Related Video: