2.0l Cd Dual Air Bags Side Impact Air Bag(s) Abs Anti-lock Brakes Keyless Entry on 2040-cars

Auto blog

Why Mazda’s Skyactiv-X compression-ignition engine is a smart hedge bet

Mazda has cracked the code on a compression-ignition engine, called Skyactiv-X (which utilizes SCCI, or Spark Controlled Compression Ignition). That's a neat engineering accomplishment, sure, but why is the tiny company investing big dollars in fancy tech that's frustrated the much larger companies who've investigated it? In this case, Mazda is peering into a crystal ball to consider how best to flow with a few troubling tides. One is the premature handwringing about the death of the internal combustion engine, another is Europe's swing away from diesel engines. Skyactiv-X seems, at this juncture, a hedge bet against both aspects. EV infrastructure lags massively behind our petroleum infrastructure — no shock there. Mazda claims the tech will net 20-30 percent gains in fuel efficiency over its current gasoline engines and about matching its diesel engine. And that's without any onboard hybrid tech, so that staves off the inevitable necessity to fully adopt electrification for a while — this is assuming that, at some point, it won't be practical to sell a non-hybrid or non-EV. At what date that happens is open to debate, but as I said above, technology like this kicks that decision point down the road a bit. Mazda is here translating research dollars into time, allowing its engine factories a few more years of probably profitable production of internal-combustion engines before retooling, and before somebody needs to pour a massive amount of money into a broad EV charging infrastructure to replace gas stations. None of this is happening fast enough for a wholesale transition to EVs anytime soon. So, that's one bet hedged. The next is Europe's declining interest in diesel engines for mainly health reasons. Just about a week ago, The New York Times posted an excellent primer on this issue, which is somewhat controversial in Europe. Germany's auto industry, a huge portion of its economy, is heavily invested in diesel tech and seriously opposed to proposals in Britain and France to eliminate the technology, which creates unhealthy diesel particulate emissions. The German industry is hoping Band-Aids like pollution-reducing measures will help them, but after a massive and widespread emission cheating scandal, its credibility is at a nadir. It seems like consumers have sensed which way the wind is blowing, and it has hurt sales. The NYT reports that diesel sales in Germany alone — remember, bastion and originator of diesel technology — are down 13 percent.

Sorry, rotary fans, Mazda's RX Vision probably won't happen

Mazda is doing a lot of things the right way in this age of beige-ness. It just crammed a turbocharged inline-four into the improved CX-9, a bold move unto itself, and one that should also be heartening for Mazdaspeed fans. Wouldn't that engine make for a swell Mazdaspeed3 or Mazdaspeed6? There's a reasonable ray of hope there, but not necessarily a guarantee. The RX Vision, though, is a pipe dream. Mazda is smart to keep the rotary dream alive. It's smart to keep developing it in back rooms and to keep the idea on the public's mind. Credit where credit's due: Mazda has solved some of the stickiest issues the rotary engine has, through savvy engineering and perseverance. We've seen promising patent filings for the Skyactiv-R engine, which is supposed to be found in the RX Vision concept. Mazda uses every opportunity to remind us that development is continuing and that the company would love to bring a rotary-powered sportscar to production. I believe it. But the RX Vision is just a design study. And there are some harsh realities about rotary engine emissions and fuel economy standards that are difficult for modern piston engines to achieve without expensive componentry. Emissions and fuel economy are both bugbears of the rotary, in case you've forgotten. And that explains Mazda's interest in running rotaries on hydrogen, but down that road lie infrastructure challenges as daunting as making a gasoline-powered rotary burn as clean as one of Mazda's Skyactiv piston engines. All this is meant to put Mazda's recent comments to Top Gear in context. Mazda's design director, Kevin Rice, spoke to TG at the Concorso d'Eleganza Villa D'Este, and was waving Mazda's rotary flag quite enthusiastically. "In the back rooms at Mazda, we're still developing it," Rice said, "and when the world's ready to buy another rotary, we'll be ready to provide it." I'd like that to be a comforting statement, but given the realities of fuel economy and emissions regulations and Mazda's position in the market, it seems like a hollow platitude. "When the world's ready" is just another way of saying "when we solve the fundamental issues with this engine layout, and there's an unambiguous market study that shows we can build these cars and make a profit, we'll consider it." That seems like a lot of "ifs". Perhaps Mazda does have a clean-burning, efficient, cheap-to-produce rotary running on an engine dyno in Hiroshima, and it's prepping an RX-9 for the next auto show.

Japan carmakers vouch for safety of some Kobe Steel parts

TOKYO — Four Japanese automakers on Thursday said they found no safety issues with aluminum parts supplied by Kobe Steel Ltd, allaying some concerns that falsified quality data on products from the steelmaker had compromised their vehicles. Kobe Steel shares surged after the car makers' statements, but the steelmaker still has to contend with a U.S. Justice Department probe, while checks continue at hundreds of companies involved in complex supply chains spanning the globe. Japan's third-biggest steelmaker admitted earlier this month it falsified specifications on the strength and durability of aluminum, copper and steel products, along with materials for optical disks. The falsifications stretch back for more than 10 years, a senior executive told Reuters this week. Since then, global automakers, aircraft companies and other manufacturers have scrambled to identify potential hazards in their products. Toyota, Honda, Nissan and Mazda said that hoods and other exterior parts used in their cars which were made from aluminum directly supplied by Kobe Steel were safe. Kobe Steel shares ended the day nearly 7 percent higher but are still down by more than a third since it announced the data falsification. Automakers are still making checks on other parts, including those that they received through their parts suppliers. "We confirmed that the materials satisfy applicable statutory standards, and our own internal standard, for key safety and durability requirements for vehicles," Toyota said in a statement. Toyota, one of the world's largest automakers, identified aluminum plates supplied by Kobe Steel for the hoods and rear hatches of Toyota and Lexus brand vehicles. Though outside the automaker's specifications, they were still safe to use. While Subaru and other carmakers said they were still investigating the issue, the announcements by Toyota, Honda, Nissan and Mazda suggest that Kobe Steel's cheating scandal may have a limited impact on product safety."SERIOUS SITUATION" Nonetheless, the company's fate hangs in the balance while checks are being carried out. It must report to Japan's industry ministry by around the end of next week on any safety concerns and provide a more extensive account of the problems a fortnight later. Industry leaders have reached a consensus that Kobe Steel is in a "serious situation," a senior Japanese manufacturing executive told Reuters.