11 6 Speed Manual Aux Alloy Wheels Bluetooth Cruise 1 Owner Carfax on 2040-cars

Auto blog

2016 Mazda CX-5 [w/video]

It's difficult for me to get excited about crossovers. I try hard not to be the stereotypical car guy: ignoring the fact that the rest of the world loves these tall hatchbacks, while yelling, "station wagons make more sense!" until I've voided my lungs of air. Deep down I am that guy, but I work around it. Historically the Mazda CX-5 is one crossover that has been quasi-immune to my knee-jerking. It doesn't weigh two tons, offers a manual transmission (in poverty spec, but still...), and looks faster than its competitors. Most importantly, the CX-5 can round a corner without wobbling like a Slinky at the top of the stairs. No item on that list of plaudits would likely crack the top ten "desirables" for average small CUV shoppers. So, for the 2016 update, Mazda instead upgraded the in-cabin experience along with the requisite nips and tucks to the exterior. I borrowed a 2016 model CX-5 to see whether or not those concessions to comfort affected the car-nerd stuff. And to see if the Mazda could still be my go-to CUV recommendation. Driving Notes The engine options are unchanged for 2016. You can still have the fine, 2.5-liter four-cylinder engine, with its 184 horsepower and 185 pound-feet of torque, or its wimpier 2.0-liter lil' brother. My fully spec'd Grand Touring came with the bigger engine, which feels adequately powerful for the class, but not quick. In an era where turbocharged engines are everywhere, revving the Skyactiv 2.5-liter up to its torque peak at 3,250 rpm takes some commitment. I'm annoyed that there's no manual offered with the 2.5L (a combo I can have in both the Mazda3 and Mazda6), but I don't hate the automatic transmission. The six-speed unit is unobtrusive 99 percent of the time; something I regretfully can't tell you about certain nine-speed autos. There are no paddles to play with, but you can tap the shift lever up and down if you're struck by a need for total control. With a new center console and dash, and the addition of the Mazda Connect infotainment system, the '16 CX-5 feels like a new vehicle from behind the wheel. An attractive, pliant, leatherish material swaths the neat console and surrounding real estate. And the perforated leather seats feel damn near upscale. I think that Mazda Connect's version of the central control knob (with handy adjacent volume knob) is almost luddite-proof in its simplicity. There's no latency between twisting and reaction on the screen.

Mazda RX-9 could be a 400-hp, 2,900-pound coupe due in 2019

Mazda poured fuel on the white-hot rumors of an RX-8 successor with the RX-Vision earlier this year. The long, low rotary-powered coupe was lovely, but as we reported, it wasn't going to happen. But now, there's another chapter in the RX rumormill, and like overnight parts, it's from Japan. Japanese site Holiday Auto claims that Mazda will debut the so-called RX-9 at the 2019 Tokyo Motor Show. But before that happens, the Zoom-Zoom company will preview the production model with a concept at next year's Tokyo Motor Show. 2017 is important, marking 50 years since Felix Wankel had the screwy idea for his eponymous engine and 40 years after the company's first rotary powered car, the Cosmo, hit the market. Exciting as Holiday Auto's report is, the stats on this long-rumored car are better – via Google Translate, the Japanese site claims the RX-9 will use a 1.6-liter, two-rotor Wankel with a single turbocharger. It's good for around 400 horsepower. Holiday Auto isn't exaggerating when it claims the car could have "bike-like acceleration." As with other Mazda products, a low curb weight is key, which is why engineers are targeting a meager 1,300 kilograms (2,866 pounds) for the production model – that weight should be pretty evenly split, too, thanks to a rear transaxle. So yes, the RX-9 will be stupid fast and extremely agile. But it will come at a cost. And by cost, we mean that the RX-9 will start just south of eight million yen. That's $79,641 at today's rates, or enough to purchase about 2.5 RX-8 R3s, the hardcore handling trim of Mazda's last-gen rotary car. And if Mazda follows Nissan's GT-R pricing model, we'll see a six-figure RX-9 by 2025. When it comes to Mazda rotary rumors, grains of salt are a must. That's doubly true when we're talking about a possible concept that won't debut for over a year. But with the RX-Vision, Mazda showed that it hasn't abandoned rotary power, and with 2017 marking a big anniversary for the technology, it seems unlikely that the company will let the date pass without some acknowledgement. A concept car seems like a solid bet. Related Video:

Junkyard Gem: 1991 Mercury Capri XR2

Just a year after the Mazda MX-5 Miata first went on sale in the United States, Ford's Mercury Division began selling a similarly-priced two-seat convertible here. This was the 1991-1994 Mercury Capri, and I've found an example of the hot-rod turbocharged version in a northeastern Colorado car graveyard. The Capri name has an illustrious history within the Ford Empire. First used on a Lincoln in 1952, it went on to serve as the name for a hardtop version of the early-1960s Ford Consul in the UK, then as the designation for a low-end trim level on the 1966-1967 Mercury Comet. Starting in the 1969 model year in Europe (1970 in North America), Ford began selling the best-known Capri of all: a sporty coupe based on the Cortina, sold through Mercury dealers in the United States but never badged as a Mercury here. Sales of that Capri halted here after 1978 (they continued through 1986 in Europe), but the Mercury Division then moved the name over to its version of the 1979-1986 Ford Mustang. After that, Ford Australia took the Capri name for a new Mazda 323-based sports car beginning in 1989. Then Dearborn decided that an Americanized version of the Australian Capri would be a success on this side of the Pacific, and left-hand-drive Capris began showing up in American Mercury showrooms in late 1990. Today's Junkyard Gem is one of those first-model-year cars, and it's the very rare turbocharged XR2 version. While this car was intended to be a competitor for the Miata, it's really that car's Mazda cousin. Both cars got their power from 1.6-liter versions of Mazda's versatile B engine, though the Capri had the same front-wheel-drive setup as its 323/Protege (and Escort/Tracer) platform siblings. At the same time, Ford was selling Kia-built Mazdas with Festiva (and, a bit later, Aspire) badging, alongside Mazda MX-6s with Probe badges. Just to make things interesting, American Mazda dealers were selling Ford Explorers as Mazda Navajos, while Rangers with Mazda badges followed starting in 1994. The 1990s were Mazda-riffic times at Ford! This car wasn't the first Australian-designed, Mazda-based Ford product sold in the United States. That honor belongs to the 1988-1989 Mercury Tracer, which was based on the same Mazda 323 platform as the Capri and built in Mexico. Later on, the Tracer remained a member of the 323 chassis family but was a nearly identical twin to its Ford Escort sibling.