2007 Mazda Mx-5 Miata Touring Convertible 6speed 32k Mi Texas Direct Auto on 2040-cars

Auto blog

Mazda CX-30 Luggage Test | How much cargo space?

The Mazda CX-30 is pretty much a lifted Mazda3 hatchback. Same platform, awfully similar dimensions, and the interior's a spitting image (if not identical). Ditto cargo capacity. On paper, the two have virtually the same amount of space behind their raised back seats, with the CX-30 at 20.2 cubic-feet and the 3 with just a teensy less at 20.1.  Now, before I go any further, let's see how much that 20.1 cubic-feet relates to in the Mazda3. I wasn't yet doing this test format back then, hence the video.  For reference, both tests used my standard luggage selection of two midsize roller suitcases that would need to be checked in at the airport (26 inches long, 16 wide, 11 deep), two roll-aboard suitcases that just barely fit in the overhead (24L x 15W x 10D), and one smaller roll-aboard that fits easily (23L x 15W x 10D). The bag of baseballs shown in the video is slightly smaller than my new small-bag go-to, my wife's fancy blue overnight bag (21L x 12W x 12D). So, the mark to beat is therefore all the bags minus the smallest roller.  Here is what 20.2 cubic feet looks like in the CX-30. To move beyond the Mazda3 comparison, that figure is in keeping with the CX-30's niche placement between subcompact (the teens) and compact SUVs (upper 20s to upper 30s). The Mazda CX-5 has 30.9 cubic-feet.  Now, typically, I start off by seeing how much I can fit inside with the cargo cover in place. Sadly, this particular CX-30's cargo cover is missing. We'll just have to hope it doesn't rob the CX-30 of as much space as the CX-5's does.  First off, it's immediately noticed that the CX-30's cargo area is not as long as the 3 hatchback's. The largest bag just barely squeezed inside, whereas there was some room to spare in the 3. Now, let's keep loading.  Whattya know? All of the roller bags fit inside. That includes the smallest one, which didn't fit in the 3, fitting atop the stack with perhaps 30% of it over the back seat line. Now, I could've done the same Tetris stack in the 3, but I'm virtually certain the hatch wouldn't have closed. Advantage, then, to the CX-30 and its extra height.  And surprise, the fancy bag also fits. Technically. It robs rear visibility, is pretty far above the seat line and it just barely fits under the back light. If it was filled, I have my doubts about its inclusion. Nevertheless, with or without it, there's still a bit more space on the right side for that bag of baseballs.  Now let's discuss the power liftgate.

Mazda reports highest profits in its 94-year history

We may only be a third of the way through 2014, but for Japanese companies, March 31 marked the end of fiscal 2014, and it was a banner financial year for Mazda's global operations. The Japanese independent saw its highest global operating profits in its nearly 100-year history. Its global operating profits were up a huge 238 percent. Yes, a 238 percent increase over 2012 to 1.36 billion euros ($1.88 billion), eclipsing the brand's previous best year, 2008, by 12 percent. Net earnings, revenue and global sales volume also saw increases over the last fiscal year.
What's most impressive, though, is where Mazda saw improvement. The notoriously rough European market was rather kind to the Zoom-Zoom brand, where sales increased 25 percent to 163,000 units. That figure was bolstered by a 35-percent sales increase in Great Britain and a 20-percent jump in Germany, Europe's two largest markets. Japanese sales, meanwhile, were up a respectable 13 percent, to 244,000 units. In China, Mazda saw a 12 percent bump.
Notice we aren't talking about North American sales? That's because Mazda only saw a moderate, five-percent gain in the New World, with sales climbing to 391,000 units in the US, Canada and Mexico. This is particularly disappointing considering Mazda has launched three critically acclaimed products (CX-5, Mazda6 and most recently, Mazda3) for the North American market over the past two fiscal years. Still, it isn't a particular reason to be concerned, as IHS industry analyst Stephanie Brinley notes. "Five percent isn't terrible," Brinley told Autoblog, saying that Mazda should see a bump in 2014 as the Mazda3 picks up steam.

Mazda returns to rotary with RX-Vision Concept, crowd goes wild

Rotary! Forget everything for a second. Ignore the sleek styling, formed-by-wind sheetmetal, outrageously rear-drive proportions, and general ridiculousness of the sideview mirrors. And please be so kind as to ignore the poorly lit photos here – Mazda has a thing for drama. Concentrate instead on one fantastic phrase from the concept car press release: "next-generation Skyactiv-R rotary engine." The crowd here in Tokyo was downright frothing to get a look at the new concept car – hoping to catch a glimpse of the first evolutionary stage for a RX-9 sports car. The critical factor in that effort is of course the rotary engine. Mazda says that, while production of the powerplant is "on hold," the company has "never stopped research and development towards the rotary engine." The fact that the company has named the new engine gives us great hope that it exists in reality, and will be available for sale at some future date. The devil is in the details though, and there are precious few available at the Mazda stand. Other than a brief history lesson about Mazda's racing heritage, and fuzzy-vision talk about the future, we only have expectations to feed on. Oh, there's also a tiny press release, below. Related Video: HIROSHIMA, Japan—Mazda Motor Corporation unveiled the rotary-powered Mazda RX-VISION sports car concept at the Tokyo Motor Show*1 today. The rotary engine is a symbol of the company's "never-stop-challenging" spirit. RX-VISION represents a vision of the future that Mazda hopes to one day make into reality; a front-engine, rear-wheel drive sports car with exquisite, KODO design-based proportions only Mazda could envision, and powered by the next-generation SKYACTIV-R rotary engine. Rotary engines feature a unique construction, generating power through the rotational motion of a triangular rotor. Overcoming numerous technical difficulties, Mazda succeeded in commercializing the rotary engine, fitting it in the Cosmo Sport (known as Mazda 110S overseas) in 1967. As the only automaker to mass-produce the rotary engine, Mazda continued efforts to improve power output, fuel economy and durability, and in 1991 took overall victory at 24 Hours of Le Mans with a rotary engine-powered race car. Over the years, the rotary engine has come to symbolize Mazda's creativity and tireless endeavor in the face of difficult challenges. While mass production is currently on hold, Mazda has never stopped research and development efforts towards the rotary engine.