Convertible Special Edition In British Racing Green And Tan Leather Low Miles on 2040-cars

Auto blog

2014 Mazda6 recalled due to fuel overfill fire risk

Mazda is recalling 19,000 Mazda6 sedans from model year 2014, over concerns that the fuel tanks can be filled up too much. What is it with Mazda and fuel tanks?
The big concern is, obviously, spillage when filling up. There's also a risk that a radical temperature swing could cause the fuel volume to expand, causing a full tank to spill over without the driver knowing about it. According to the National Highway Traffic Safety Administration bulletin, if the fuel spills over, it could end up in something called the charcoal canister, which helps with the car's emissions. If it fills up the canister, it could leak out onto the road. None of this is really desirable.
The affected vehicles were all built between October 25, 2012 and May 9, 2013. It's unclear if there have been any fires due to this problem. Dealers should have been notified by now, while owners should begin receiving official recall notifications very soon.

2020 Mazda CX-9 gets more torque and second-row captain's chairs

The 2020 Mazda CX-9 is here, and it’s even more enticing than the 2019 model year SUV. ItÂ’s not a full redesign, but Mazda shook up the features list to make it more competitive with other three-row crossovers. Most notable (arguably) of all changes comes from a small increase in torque — the 2.5-liter turbocharged four-cylinder gets bumped from 310 pound-feet of torque to 320 pound-feet. Horsepower remains the same at 250 horses. Those figures are only applicable when using 93 octane fuel. They go down to 227 horsepower and 310 pound-feet of torque when on 87. Another new feature is an off-road traction assist button, replacing the traction control button. This new feature is meant to help when navigating rougher terrain. HereÂ’s how Mazda describes its function: “When the diagonal wheels lose traction, off-road traction assist will stop reducing the engine torque and increases the brake force on the wheels without traction. This transfers power to the wheels still on the ground to help allow the vehicle to regain traction and continue the drive.” WeÂ’ll be interested to see how this helps the CX-9 on a snowy Michigan winter day soon. The number of standard features on the base Sport trim is up, too. Now all CX-9s get heated front seats, a power driverÂ’s seat, rain-sensing windshield wipers, heated outside mirrors and auto high-beams. Additionally, Mazda made its full suite of i-Activsense safety features standard. This includes adaptive cruise control, lane-keep assist and other driver assistance niceties. Mazda is also adopting the new key fob design of the Mazda3 for the CX-9. Optional on the Touring and Grand Touring are second-row captainÂ’s chairs. Previously, Mazda only offered bench style seating for the CX-9, so this addition could be a huge turn-on for some folks in this segment. The chairs have armrests, and the lack of a center pull-down means Mazda had to redesign its cupholder layout in back. In CX-9s equipped with the chairs, the cup holders and USB ports are now integrated into the backside of the front center console. If you opt for the captainÂ’s chairs in the Grand Touring or Signature trims, the seats are heated.  Pricing does increase a fair amount for the 2020 CX-9. A base front-wheel drive Sport is now priced at $34,835 including destination, a $1,510 increase from last yearÂ’s base price. The top of the range only got $750 more expensive, though, as the Signature starts at $47,160.

Mazda RX-9 could be a 400-hp, 2,900-pound coupe due in 2019

Mazda poured fuel on the white-hot rumors of an RX-8 successor with the RX-Vision earlier this year. The long, low rotary-powered coupe was lovely, but as we reported, it wasn't going to happen. But now, there's another chapter in the RX rumormill, and like overnight parts, it's from Japan. Japanese site Holiday Auto claims that Mazda will debut the so-called RX-9 at the 2019 Tokyo Motor Show. But before that happens, the Zoom-Zoom company will preview the production model with a concept at next year's Tokyo Motor Show. 2017 is important, marking 50 years since Felix Wankel had the screwy idea for his eponymous engine and 40 years after the company's first rotary powered car, the Cosmo, hit the market. Exciting as Holiday Auto's report is, the stats on this long-rumored car are better – via Google Translate, the Japanese site claims the RX-9 will use a 1.6-liter, two-rotor Wankel with a single turbocharger. It's good for around 400 horsepower. Holiday Auto isn't exaggerating when it claims the car could have "bike-like acceleration." As with other Mazda products, a low curb weight is key, which is why engineers are targeting a meager 1,300 kilograms (2,866 pounds) for the production model – that weight should be pretty evenly split, too, thanks to a rear transaxle. So yes, the RX-9 will be stupid fast and extremely agile. But it will come at a cost. And by cost, we mean that the RX-9 will start just south of eight million yen. That's $79,641 at today's rates, or enough to purchase about 2.5 RX-8 R3s, the hardcore handling trim of Mazda's last-gen rotary car. And if Mazda follows Nissan's GT-R pricing model, we'll see a six-figure RX-9 by 2025. When it comes to Mazda rotary rumors, grains of salt are a must. That's doubly true when we're talking about a possible concept that won't debut for over a year. But with the RX-Vision, Mazda showed that it hasn't abandoned rotary power, and with 2017 marking a big anniversary for the technology, it seems unlikely that the company will let the date pass without some acknowledgement. A concept car seems like a solid bet. Related Video: