2012 Mazda Mx-5 Miata Grand Touring Convertible 6spd 6k Texas Direct Auto on 2040-cars

Auto blog

2014 Mazda Skyactiv Prototype looks ready for Daytona

With less than two weeks before the Mazda Skyactiv Prototype makes its race debut at the 2014 Rolex 24 at Daytona, the Japanese Zoom-Zoom brand brought its diesel-powered racer to the floor of the 2014 Detroit Auto Show.
The red prototype marks Mazda's return to prototype racing, and will campaign the inaugural Tudor United SportsCar Championship using a 2.2-liter, SkyActiv-D diesel engine. With 451 horsepower on tap and 580 pound-feet of torque, the racer should stand up well against a field of gas-powered competitors.
Should the Skyactiv win Daytona, it'll be a coup for Mazda. The racer is running an engine with over 50 percent of its parts drawn from the oft-delayed production Skyactiv-D. Head up top for our full gallery of images of the new Skyactiv Prototype. The 2014 Rolex 24 will be run from January 25 to 26.

Mazda3 Skyactiv-Hybrid and CNG Concept shown in Japan

Mazda has received a tremendous amount of public and industry praise in the last few years, following up the successful introduction of its Skyactiv technology (powertrain and otherwise), with strong products like CX-5, Mazda6 and most recently, the Mazda3. At the Tokyo Motor Show, Mazda has taken yet another step forward with Skyactiv and the 3, showing the compact (called "Axela" in Japan) with an all-new compressed natural gas engine in the Skyactiv-CNG Concept.
The end result of the Skyactiv-Hybrid is fuel consumption estimated at something like 74 miles per gallon.
Mazda thinks that CNG-powered vehicles are due for an uptick in demand, and the company believes this new powertrain will add valuable breadth to the Mazda3 range. The CNG Concept is actually a duel-fuel vehicle, capable of running on either natural gas or gasoline. In fact, we're told that the high compression ratio (14:1) inherent in Skyactiv-technology gasoline engines makes conversion to CNG particularly simple.

Confirmed: Mazda Miata gets more power, higher redline, telescoping wheel

Our friend over at Road & Track, Bozi Tatarevic, has a keen nose for stuff just like today's Miata news, and he spotted an article by the Japanese car magazine Car Watch that details Mazda's upcoming updates. Car Watch actually got to drive the car, too. There's a lot to go through, but the highlight has to be confirmation of what we told you earlier this year about a significant power bump: The Miata will indeed get an increase of 26 horsepower, from 155 to 181. But the power's not the whole story. Mazda has increased the redline from 6,800 RPM to 7,500. It's not clear at this point where torque and power peaks are in the rev range, or how these changes affect low-speed drivability, but more revs are almost always a good thing and aren't likely to detract from the roadster's fundamental goodness. Car Watch reports that lighter pistons and connecting rods are fitted to help reduce rotational mass in the 2.0-liter inline-four. Some valvetrain changes were needed to support the higher redline, mainly stiffer valvesprings to prevent valve float. Mazda also changed the shape of the valves and optimized the intake ports to breathe better at higher RPM. The inner diameter of the exhaust ports were increased to flow better through a new muffler better tuned to the engine's new operating range. This confirms and gives a little more detail to what we reported earlier based on a leaked document from Mazda Canada. Car Watch also confirms that the revised Miata will get a low-inertia dual-mass flywheel, which should help absorb some vibration, noise and harshness from the higher-revving engine without losing too much of the directness that a single-mass flywheel provides. Mazda usually gets stuff like this right, so while we won't know until we get a chance to drive it whether the DMF feels "right," we're not too worried about it. There's also a telescopic steering wheel, a first in any Miata, which has a range of about 1.1 inches. That doesn't sound like much, but it should help folks with longer legs reach the wheel without having to crank the seat forward. Interestingly, Car Watch reports that the telescoping wheel was opposed by some in the company seeking to save every fraction of an ounce of weight, and to get it through, the company apparently had to change some of the material in the upper steering column from steel to aluminum to satisfy the weight-conscious. Little details like these are fantastic.