2006 Mazda Miata Mx-5 Grand Touring on 2040-cars

Auto blog

2019 Mazda CX-3 crossover updated with a tad more power and refinement

NEW YORK — Mazda's smallest vehicle, the CX-3 subcompact crossover, is getting a refresh for the 2019 model year. Visually, you'd be hard-pressed to tell what changed, and that's because not much did. The grille now has slats that are grouped in pairs, and the rear taillights have been redesigned. But there are a number of changes aside from visuals that separate this model from the 2018. Under the hood is still a 2.0-liter naturally aspirated four-cylinder engine. It picks up two more horsepower and pound-feet of torque for totals of 148 for each, though Mazda says that it also picks up torque across more of the rev band and gets better fuel economy. Mazda didn't have official mileage numbers, though. The CX-3 will also now come with the G-Vectoring Control system that helps improve turn-in by reducing torque and shifting weight forward. The steering and suspension have been slightly retuned, and the tires developed to better absorb bumps. Deeper inside the CX-3, several changes should make the driving experience more calm and refined. These include thicker door panels and rear door glass to make things quieter. The seats are now wider with redesigned foam cushions for greater comfort. A new integrated armrest in the center console and one in the rear seats with cup holders help the same cause. Mazda will also add faux suede trim to the cabins of CX-3s for a more premium feel. Pricing hasn't been announced for the new CX-3, but the little crossover will go on sale in late spring. So expect pricing to come soon. Fuel economy numbers will likely be available soon, too. Related Video:

Mazda won't build new Mazdaspeed3 or 6 based on current models

It's sad news but not entirely unexpected: According to a Motoring interview, Mazda doesn't intend to build high-performance versions of the latest Mazda3 and Mazda6. Instead, it will wait for the next generations of those cars to arrive before applying the Mazdaspeed treatment. When the future performance models do eventually arrive, expect them to take a step upmarket compared to the last ones. In the meantime, the Japanese brand will focus its engineering resources on the next-generation Skyactiv engine family, according to Mazda's North American operations president and CEO Masahiro Moro. "Our research and development department is 100 percent focused on delivering Skyactiv generation two and if we don't have this we don't have any other derivatives," Moro told Motoring. Once the new engines arrive around 2017, Mazda's engineers can start to develop performance versions. "MPS or performance model or a sort of iconic model of the future will be a little bit later at this stage," Moro said. Moro is already thinking about the direction for the future performance vehicles. He calls the previous Mazdaspeed3 "childish" and thinks it's time to go a different way. "Mazda brand has become more mature, more upscale, more sophisticated, and we have a new transition of the brand to relate that direction," he said. Rumors last year suggested that Mazda might introduce a new Mazdaspeed3 (speculative rendering above) as a concept at the 2015 Frankfurt Motor Show. It would have reportedly used the CX-9's 2.5-liter turbocharged four-cylinder tuned to 295 horsepower and an all-wheel-drive powertrain. The vehicle never appeared, though. The current Mazda3 and Mazda6 arrived in 2014, so a new generation of each wouldn't arrive until around 2020. That would put Mazdaspeed derivatives at 2021 or later. In short, it will be a while. For customers that have the Driving Matters attitude now, Mazda still offers the award-winning MX-5 Miata as a convertible and soon with an impressive folding hardtop. Plus, Fiat will sell its own versions of the car with 160 hp. We wouldn't mind if Mazda turned up the heat a little by introducing something like the Racing concept from last year's Tokyo Auto Salon, though. Related Video:

Mazda development chief discusses future rotary platform

The switch can again be flicked from "The Rotary Engine is Doomed" to "The Rotary Engine Lives!" Mazda is re-tooling the once nearly forgotten rotary to work as a range extender for hybrid vehicles, with a chance for it to do even more than that. The latest information sounds rather promising for those still holding out a candle for the rotary. Mazda's powertrain development chief, Ichiro Hirose discussed future rotary plans with the Australian Drive at the CX-30 crossover's launch. Hirose told Australia's Drive that Mazda is currently working with a very flexible and efficient rotary hybrid platform that doesn't necessarily come with the heavy emissions and fuel consumption baggage the rotary engine has earlier been saddled with. Hirose calls the rotary-based solution "XEV," referring to its adaptability. "It has the generator function and also it can be used to provide the drive force to give you traction. [...] Because the rotary engine is compact in terms of its packaging size [and] if we should choose to do so we can have the generator, rotary engine and electric motor all in one [driveline] because of the small packaging." The result is an electrified platform that could be made to work as a mild hybrid, series hybrid or a battery electric vehicle with a rotary range extender (if given a plug), depending of the required implementation. It's as if Mazda had a slider to adjust the balance of using a rotary engine and using electric power, to make the platform more of a jack-of-all-trades. Hirose explained: "If you reduce the other way around it could be a pure battery-electric, using really the rotary engine as a range extender and, according to the balance, you can even provide something akin to the series hybrid that is providing the drive force. [...] So, we are looking at a wider coverage and scope. Based on this architecture it allows us to do that, to explore the huge range of applications we can have with the rotary." The platform would also be flexible when it comes to meeting various stringent emissions standards. To be able to sell XEV-based vehicles globally would mean introducing a certain setup for one region and one for another, keeping in mind when the rotary power would kick in and how. While Hirose keeps the question open whether these vehicles would make it for sale in the United States, he says Mazda would be able to make them pass U.S regulations. "I'm just saying that — theoretically — if we were to introduce it in the U.S.