2000 Mazda Miata Ls Convertible 2-door 1.8l on 2040-cars

Auto blog

Our Mazda MX-5 Miata has the best engine bay in the business

One of the things that's really disappointing about modern cars is how they all hide their technology under a proverbial bushel. You pop the hood, and nine times out of 10, you're faced with some amount of black plastic hiding the functional bits. On some cars the plastic covers the bare minimum to have a "presentable" engine. Others have every tank, hose, wire and screw buried under a layer of smooth plastic. Few exemplify this practice better than engine bay of the current Lexus LS 460, seen below. If Lexus was this embarrassed about its engine, maybe it should have simply bolted the hood shut. However, like with weight gain and power creep, our fourth-generation Mazda MX-5 Miata bucks the plastic trend. Lift the aluminum hood of the little roadster, and you travel back in time more than a decade. (See the gallery up top.) Only one bit of decorative plastic is in sight, and it proclaims the car's Skyactiv technology and hides some of the wires leading to the ignition coils. Otherwise, nothing else is obscured. The shock tower braces, manifolds, battery terminals, the whole shebang is all right there for you to see. What's particularly amazing is that it all looks good. Even in some cars that eschew plastic covers, it's no guarantee of an attractive engine bay. We just had a new Honda Civic Sport hatchback (seen immediately above), and while it doesn't sport a plastic engine cover, you can see from the photo that it's not particularly attractive with tubes and cables snaking every which way. But in the Miata, the hoses and wires are kept to a minimum, and the ones that are there are arranged in a way that isn't haphazard or tangled. Then, in the middle, there's the clean, simple aluminum cam cover as the gleaming centerpiece, similar to those of the first- and second-generation cars. As the owner of a '99 Miata, this detail in particular gives me the warm fuzzies. The fully exposed engine bay fits with the Miata's personality. The car is very straightforward, it features just the absolute minimum of style and comfort additions, and is highly accessible. I would say the Miata's engine bay is the window to its soul, if driving it didn't offer a clearer picture. Related Video:

2014 Mazda3 2.0L Hatchback officially rated at 40 mpg highway

The Environmental Protection Agency has spoken, and these are the miles per gallon numbers it has officially bestowed on the 2014 five-door Mazda3 hatchback with the SkyActiv-G 2.0-liter engine: 29 city, 40 highway, 33 combined when fitted with the six-speed manual; 30 city, 40 highway and 33 combined when equipped with the six-speed automatic.
Those numbers exactly match the fuel economy targets that Mazda had set for the car when optioned with the 2.0-liter Skyactiv-G with 155 horsepower and 150 pound-feet of torque. For comparison to other cars in the segment, the EPA numbers for the 2013 Honda Civic sedan are 28 city, 39 highway, 32 combined when its 140-hp, 1.8-liter four-cylinder is paired with the five-speed automatic. The Hyundai Elantra GT gets 27 city, 37 highway and 30 combined according to the EPA when its 148-hp, 1.8-liter four-cylinder is paired with either a six-speed manual or six-speed automatic transmission. The numbers for the 2014 Ford Focus aren't out yet.

Mazda's new turbo four fits in both the 6 and the 3

Despite the size differences, the Mazda CX-9 shares a lot with its smaller car-based siblings, the Mazda6 and Mazda3. That could allow Mazda to slot its full-sizer's new 2.5-liter, turbocharged four-cylinder engine under the hood of its smaller offerings. Pardon us while we do a happy dance. "[The 2.5-liter turbo] fits in a lot of our cars, and where we're actually going to put it is another question," Mazda North America vehicle development engineer Dave Coleman told Australia's Car Advice. Coleman specified that the turbocharged engine will fit in all the same applications that can accommodate the company's 2.5-liter gas and diesel engines. "Basically, that big space we used for the bundle of snakes exhaust manifold, the turbo is in that space too. They're all packaged to occupy the same space. It's exactly the same clearance as the exhaust manifold of the other engines." This kind of logic – if Engine A is the same size as Engine B, then both should fit in Car C – is what's lead us to imagine a turbocharged Mazda6 since the new engine was announced. In short, it's great news. Mazda's 2.5-liter turbo is a hell of an engine in the CX-9, and it's hard to imagine it'd be worse in a lighter vehicle. But just because it works from an engineering standpoint doesn't mean it's going to happen. At least, not soon. "It fits. I'm not a product planner so I don't get to make that call," Coleman told Car Advice. "It's up to the product planners to decide what they're going to put it in." The most obvious application for a turbocharged engine in the 3 or 6 is as a reborn Mazdaspeed model. But don't get too excited – Coleman said Mazda hasn't even gotten as far as building an engineering prototype with this engine. We're still firmly at the theoretical stage. And that's bad news, because it gels with what we've been reporting – that Mazda will wait a generation for future Mazdaspeed models. We just stopped doing our happy dance. Related Video: