1995 Mazda Miata Base Track Race Car 1.8l <90k Miles on 2040-cars

Auto blog

Mazda 16X rotary engine two years away, will arrive in all-new model

We last reported on Mazda's next-generation rotary engine project in June of 2012 when the automaker built its last Renesis-powered RX-8, but rumors of this new engine's development had been around way before that final car left the production line in Japan, last year.
We now have enthusiastic confirmation that this next-gen rotary engine is really and truly going forward. It is still referred to as 16X and has several priorities. First is to lower fuel consumption compared to the RX-8's engine, while still making gains in terms of performance. The second is to reduce the burning of oil that was happening at the highest revs. And the third and final priority, and perhaps most key for enthusiasts, is to give the powertrain a big torque upgrade.
What we were told by a Mazda USA insider (while we are all here together at the festivities in Monterey) is that the first application of the new 16X engine will be happening in two years' time in an as yet undisclosed new model. Oh, the mind races to our eternal Mazda wish list...

100k Mazda6 sedans recalled over tire-monitoring systems

A tire pressure monitoring system (TPMS) is, as you might have guessed, designed to monitor the air pressure in the tires, and alert the driver if pressure drops. But a problem found in the Mazda6 could keep the system from doing its job. According to the recall notice issued by the National Highway Traffic Safety Administration, the TPMS in the Mazda6 might not recognize a loss in tire pressure if all the tires slowly deflate at the same time. Under-inflated tires, it goes without saying, could increase the risk of a crash. As a result, Mazda is recalling 99,711 examples of the 2014-2015 Mazda6 to have the system's software updated. RECALL Subject : Tire Pressure Monitoring System/FMVSS 138 Report Receipt Date: OCT 27, 2014 NHTSA Campaign Number: 14V675000 Component(s): TIRES Potential Number of Units Affected: 99,711 Manufacturer: Mazda North American Operations SUMMARY: Mazda North American Operations (Mazda) is recalling certain model year 2014-2015 Mazda6 vehicles manufactured October 25, 2012, to October 10, 2014. If the pressures of four of the tires on an affected vehicle gradually drop at the same time, the tire pressure monitoring system (TPMS) may not warn the driver of the drop in pressure. As such, these vehicles fail to comply with the requirements of the Federal Motor Vehicle Safety Standard (FMVSS) No. 138, "Tire Pressure Monitoring System." CONSEQUENCE: A vehicle that is driven with under inflated tires may experience a sudden tire failure, increasing the risk of a crash. REMEDY: Mazda will notify owners, and dealers will update the TPMS software, free of charge. The recall is expected to begin on December 10, 2014. Owners may contact Mazda customer service at 1-800-222-5500. NOTES: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

Feds investigating Mazda CX-9 over suspension problems

The National Highway Traffic Safety Administration is opening a preliminary evaluation into the 2007-2008 Mazda CX-9 because the lower ball joint in the front suspension can potentially separate while driving. An estimated 54,000 examples of the crossover might be affected. The investigation was prompted by six complaints of this happening on the road. Because the complaints are coming more rapidly as of late, NHTSA thinks the issue could be getting worse. The problem also appears to be more prevalent in states that use salt on their roads in the winter. None of the failures caused any injuries, and all but one happened at 20 miles per hour or slower. NHTSA's preliminary evaluations "assess the scope, frequency, and safety consequence" of a potential problem and can sometimes lead to recalls. Related Video: INVESTIGATION Subject : Front Suspension Ball Joint Separation Date Investigation Opened: JUN 09, 2015 Date Investigation Closed: Open NHTSA Action Number: PE15022 Component(s): SUSPENSION All Products Associated with this Investigation close Vehicle Make Model Model Year(s) MAZDA CX-9 2007-2008 Details Manufacturer: Mazda Motor Corp. SUMMARY: The Office of Defects Investigation (ODI) has received six (6) complaints (VOQs) alleging incidents of front suspension LBJ separation in MY 2007 through 2008 Mazda CX-9 vehicles. The reports appear to show an increasing trend. One of the separations allegedly occurred at 40 mph and the other 5 incidents occurred at speeds between 0 and 20 mph. The first VOQ was received in October 2013, followed by 2 reports in late 2014 and 3 reports in the first 5 months of 2015. Four of the VOQs are from states using high volumes of road salts (?salt states?) which, for purposes of this investigation, include: Connecticut, District of Columbia, Delaware, Illinois, Indiana, Iowa, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, West Virginia, and Wisconsin. The other VOQs were from northern Virginia, which borders the ?salt state? region, and South Carolina. ODI also identified EWR field report data related to the alleged defect in the subject vehicles. A preliminary investigation is being opened to assess the scope, frequency, and safety consequence of the alleged defect. The six VOQs associated with this investigation are: 10717510, 10714469, 10695142, 10668978, 10640541, and 10546535.