1993 Mazda Mx-5 Miata Touring on 2040-cars

Auto blog

Feds investigating Mazda CX-9 over suspension problems

The National Highway Traffic Safety Administration is opening a preliminary evaluation into the 2007-2008 Mazda CX-9 because the lower ball joint in the front suspension can potentially separate while driving. An estimated 54,000 examples of the crossover might be affected. The investigation was prompted by six complaints of this happening on the road. Because the complaints are coming more rapidly as of late, NHTSA thinks the issue could be getting worse. The problem also appears to be more prevalent in states that use salt on their roads in the winter. None of the failures caused any injuries, and all but one happened at 20 miles per hour or slower. NHTSA's preliminary evaluations "assess the scope, frequency, and safety consequence" of a potential problem and can sometimes lead to recalls. Related Video: INVESTIGATION Subject : Front Suspension Ball Joint Separation Date Investigation Opened: JUN 09, 2015 Date Investigation Closed: Open NHTSA Action Number: PE15022 Component(s): SUSPENSION All Products Associated with this Investigation close Vehicle Make Model Model Year(s) MAZDA CX-9 2007-2008 Details Manufacturer: Mazda Motor Corp. SUMMARY: The Office of Defects Investigation (ODI) has received six (6) complaints (VOQs) alleging incidents of front suspension LBJ separation in MY 2007 through 2008 Mazda CX-9 vehicles. The reports appear to show an increasing trend. One of the separations allegedly occurred at 40 mph and the other 5 incidents occurred at speeds between 0 and 20 mph. The first VOQ was received in October 2013, followed by 2 reports in late 2014 and 3 reports in the first 5 months of 2015. Four of the VOQs are from states using high volumes of road salts (?salt states?) which, for purposes of this investigation, include: Connecticut, District of Columbia, Delaware, Illinois, Indiana, Iowa, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, West Virginia, and Wisconsin. The other VOQs were from northern Virginia, which borders the ?salt state? region, and South Carolina. ODI also identified EWR field report data related to the alleged defect in the subject vehicles. A preliminary investigation is being opened to assess the scope, frequency, and safety consequence of the alleged defect. The six VOQs associated with this investigation are: 10717510, 10714469, 10695142, 10668978, 10640541, and 10546535.

Autoblog readers meet the 2016 Mazda MX-5 Miata [w/video]

Mazda dropped off a 2016 MX-5 Miata at our office this week with only two stipulations: don't break it, and don't talk about driving impressions until 3:01 AM Eastern on Monday, June 1. Easy enough. But rather than hold our notes until the embargo lifts, we decided to do something different. By now, you've no doubt read all there is to know about the 2016 Miata, including our review of the Japanese-spec car with the 1.5-liter engine that isn't coming to North America. You know it's smaller than the outgoing NC model. And you know that, at 2,332 pounds, it's nearly as light as the original. But what you, and we, didn't know, is what Miata owners think about the 2016 model. The MX-5 group is incredibly enthusiastic, and they love their cars. Hell, they love each other's cars. So we gave them an opportunity to not only get together, but to get an up-close, informal look at the ND Miata outside of an auto show, several months before it officially goes on sale. Here's what we did. Cars And Coneys Anyone who's familiar with the Woodward Dream Cruise in metro Detroit has no doubt heard of Athens Coney Island in Royal Oak, MI. It's an iconic place, known for its top-notch coney dogs, quick service, and the fact that, on pretty much any warm-weather weekend, you can find cool cars in the parking lot. We called the folks at Athens, told them about our Miata meet-up, and they were immediately on board with coneys, soda, and coffee for our gathering. We first published our meet-up info late last week, and sent the details out on our social media channels, as well. But without any formal RSVP system, we had no idea how many people would show up. And since Mother Nature decided to provide us with gray skies and chilly temperatures, we figured a lot of would-be attendees opted to bail at the last minute. Needless to say, we were surprised to see several Miatas already lined up in the Athens parking lot when we arrived with the ND at 4:40 PM, 20 minutes before the listed 5:00 start time. No one kept a formal count, but our best guess is that something like 50 or 60 cars showed up over the course of three hours. Some folks stayed the whole time, some people only stopped by for a quick cup of coffee. A couple people drove long distances to attend – a few Miatas hailing from southern Ohio, and many from western Michigan. We had a huge mix of cars, too.

Mazda Hazumi Concept shows up ahead of Geneva

Last week, Mazda officially teased its Geneva-bound Hazumi concept, showing little more than an aggressive headlamp design. But now, thanks to the magic of the Internet, another rendering of the Hazumi has appeared on the web, and, well, it's totes adorbs.
In Mazda's original release from last week, we were told that the name "Hazumi" means "spring up" or "bound" in Japanese, and is "particularly well-suited to a small car that appears to be bursting with energy." And now that we're getting a nearly full glimpse of the thing, we absolutely have to agree. The company's Kodo design language offers aggressive style in a cute little shape, and the usual raft of concept car-spec treatments (no mirrors, huge wheels, etc.) make it look even more comical and delightful.
Indeed, the Hazumi is understood to preview the next Mazda2 subcompact, and if this concept car points the way forward for Mazda's tiniest hatch, consider us totally geeked. Mazda is also set to debut its new 1.5-liter Skyactiv-D diesel engine at the Geneva Motor Show next week, and while the company hasn't confirmed if that powerplant will make its way into the next Mazda2, it sure makes sense, at least overseas. Stay tuned.