1991 Mazda Mx-5 Miata on 2040-cars

Auto blog

Japan carmakers vouch for safety of some Kobe Steel parts

TOKYO — Four Japanese automakers on Thursday said they found no safety issues with aluminum parts supplied by Kobe Steel Ltd, allaying some concerns that falsified quality data on products from the steelmaker had compromised their vehicles. Kobe Steel shares surged after the car makers' statements, but the steelmaker still has to contend with a U.S. Justice Department probe, while checks continue at hundreds of companies involved in complex supply chains spanning the globe. Japan's third-biggest steelmaker admitted earlier this month it falsified specifications on the strength and durability of aluminum, copper and steel products, along with materials for optical disks. The falsifications stretch back for more than 10 years, a senior executive told Reuters this week. Since then, global automakers, aircraft companies and other manufacturers have scrambled to identify potential hazards in their products. Toyota, Honda, Nissan and Mazda said that hoods and other exterior parts used in their cars which were made from aluminum directly supplied by Kobe Steel were safe. Kobe Steel shares ended the day nearly 7 percent higher but are still down by more than a third since it announced the data falsification. Automakers are still making checks on other parts, including those that they received through their parts suppliers. "We confirmed that the materials satisfy applicable statutory standards, and our own internal standard, for key safety and durability requirements for vehicles," Toyota said in a statement. Toyota, one of the world's largest automakers, identified aluminum plates supplied by Kobe Steel for the hoods and rear hatches of Toyota and Lexus brand vehicles. Though outside the automaker's specifications, they were still safe to use. While Subaru and other carmakers said they were still investigating the issue, the announcements by Toyota, Honda, Nissan and Mazda suggest that Kobe Steel's cheating scandal may have a limited impact on product safety."SERIOUS SITUATION" Nonetheless, the company's fate hangs in the balance while checks are being carried out. It must report to Japan's industry ministry by around the end of next week on any safety concerns and provide a more extensive account of the problems a fortnight later. Industry leaders have reached a consensus that Kobe Steel is in a "serious situation," a senior Japanese manufacturing executive told Reuters.

Stock Miata beats bunch of high-powered cars in wet 1/4-mile drag race

When is a stock, 167-horsepower Mazda MX-5 Miata quicker than a Chevrolet Corvette, Ford Mustang, Lamborghini Gallardo, Lotus Elise and a Porsche 911? When it's raining. Sort of.
Mazda Canada arranged a unique drag race to show off the fact that the Miata's optional power retractable folding hardtop can go from top-down to top-up in just 12 seconds flat. In this video, all six cars line up for a drag race, and it starts to rain (well, sort of - but you'll have to watch the video all the way to the end to see what we mean). The green flag is waved, and the timer starts as soon as the convertibles begin to put their tops up. But because the Miata's roof mechanism gets the car's roof back up a full 5.1 seconds quicker than the second-place car, the Mazda gets a serious advantage off the line for the actual drag race.
It's a fun video. And while we've spoiled the results (come on, the video was uploaded by Mazda, you knew the Miata was going to win), be sure to see how it all unfolds, below.

Mazda's EV resistance may mean CAFE trouble ahead

Is Skyactiv the limit for Mazda? The Japanese automaker has ridden its gas-powered engine technology platform to the upper end of fleetwide fuel economy among automakers in the US. But the company's lack of electrification, either hybrids of plug-in vehicles, combined with increasing sales of crossovers, may limit future fuel-efficiency gains, Automotive News reports. Mazda has no plans to add battery-electric variants across its product line, the publication says, citing comments from Mazda North America CEO Masahiro Moro. So far, the dependence on Skyactiv has worked well, as Mazda was the second automaker - after electric-vehicle maker Tesla Motors – to meet the US fuel-economy mandate of 34.1 miles per gallon for 2016. Additionally, Mazda plans to unveil the second-generation version of Skyactiv next year. Using a technology called "homogenous-charge compression ignition" (HCCI), Mazda's gas-powered engines will approximate the compression in diesel engines, boosting fuel economy accordingly. Because of that development, Mazda's Moro is "very confident" that the company will meet the US Corporate Average Fuel Economy (CAFE) mandate for 2021. With no plans for US plug-ins or hybrids (Mazda's only hybrid, a variant of the Mazda3, is sold in Japan), Moro is not so sure about meeting the 2025 CAFE mandate of 54.5 mpg (which equates to a "real world" fuel economy of about 40 mpg). Additionally, Mazda's "biggest regulatory headache" will be meeting California's mandate that 15 percent of the state's new-vehicle sales be zero-emissions within the next decade. In 2011, Mazda laid out its strategy of leaning on its Skyactiv technology instead of moving to drivetrain electrification as a way to boost fleetwide fuel economy, saying at the time that "you can't out-Toyota Toyota and you can't out-Honda Honda." The company also took a strong stance against even the idea of electrification in vehicles. According to the US Environmental Protection Agency (EPA), Mazda's model-year 2015 vehicles averaged 30.1 mpg, beating out Honda's 28.9 mpg, Subaru's 28.7 mpg, and Nissan's 28.3 mpg. Mazda's fleetwide fuel efficiency increased from 29.4 mpg for the 2014 model year, and from 28.1 for the 2013 model year, according to the EPA. Related Video: Featured Gallery Mazda3 SkyActiv-Hybrid View 21 Photos News Source: Automotive News-sub.req. Green Mazda Fuel Efficiency Green Automakers Electric Hybrid skyactiv mazda hybrid mazda electric car