1991 Mazda Miata Base Convertible 2-door 1.6l on 2040-cars

Auto blog

Fiat 124 caught entirely undisguised

Dear automakers, please continue making these kind of mistakes. Thanks to what we're guessing is some lax security, the all-new, Mazda MX-5 Miata-based Fiat 124 was spotted taking part in a photo shoot near Santa Barbara, CA. The images show what we'd consider a fairly simple rebadging job. The 124 gets new front and rear clips that not only harken back to the original 124 (not to mention other Fiat roadsters, like the Barchetta), but also serves to distance this droptop from the rest of the company's US range. The similarities between the 124 and the car it's based on are even more obvious in the cabin. This is an MX-5 interior with Fiat's big, red badge on the tiller. That means the same quality materials and knob-dial infotainment system that have been so well received in the Miata. It's under the hood, though, where the Fiat really differs from its Japanese cousin. According to our spy, the vehicle shown here features some kind of two-pedal setup – probably the six-speed Euro twin-clutch used in the 500L and Dodge Dart. Don't worry, though, a six-speed stick will also be on offer. Regardless of transmission, we can expect a 180-horsepower version of the 1.4-liter, turbocharged, four-cylinder offered in the 500 Abarth. And if that's not enough good news, a dedicated Abarth model will likely arrive after launch, which our spies claim will use the 1.75-liter turbo and DCT from the Alfa Romeo 4C. While this represents a good look at the new 124, we'll probably be waiting until the LA Auto Show in November for the official look. Stay tuned.

1993 Mazda RX-7 Retro Review | A '90s hero turns 25

Boom times build interesting cars. In the late 1980s, Japan was flush with capital, and automakers spent like the party was never going to end. Suddenly building the third-generation RX-7 — the world's most advanced twin-turbo rotary sports car — seemed like the most natural thing a small car company hailing from Hiroshima could do. On this side of the Pacific, however, there was no context for the sudden influx of unusually tricked-out Japanese hardware flooding American dealerships. And none of the Japanese sports cars of the era was more unusual than the FD-generation Mazda RX-7, imported from 1993 to 1995 (and continuing on in Japan until 2002). Although the island nation's economy was headed on a downward spiral by the end of 1990, Mazda was in no position to pull back and walk away from the development dollars that had already been spent on its latest RX-7. As a result, Americans were able to briefly bask in the glow of one of the most unique engineering experiments ever unleashed on unsuspecting buyers. For its time, the Mazda RX-7 was a spaceship. With fluid lines that screamed "exotic," it joined the NSX in showing that supercars didn't have to have European blue blood running in their cooling systems to elegantly snag eyeballs. The twin-rotor, 1.3-liter 13B-REW situated behind the RX-7's front axle revved all the way to 8,000 rpm on its quest to produce 255 horsepower and 217 pound-feet of torque, with a pair of sequential turbos handing boost duties back and forth around the 4,500 rpm mark. A five-speed manual gearbox was standard with the FD (a four-speed automatic was optional), as was a curb weight in the neighborhood of 2,800 pounds — nearly 500 lbs less than the contemporary Toyota Supra. Significant figures for the era, to be sure. While they might pale in comparison to the average sports car today, slide into the RX-7's cockpit and drive the car, rather than just crunch the numbers. You'll quickly discover what can be accomplished when the company that engineered the Miata pulls a full John Hammond and "spares no expense" developing a world-beating sports car platform. The 1993 Mazda RX-7 I've been loaned from Mazda's classic collection is an R1 car, which means tighter suspension tuning, a few cosmetic upgrades, and a Competition Yellow paint job.

2019 Mazda6 Skyactiv-D diesel caught in spy photos

We get it – we're a little sick of getting a few years of assurances that Mazda's much-anticipated diesel engine is just around the corner. First, it was going to go in the 2014 Mazda6, then it was delayed. More recently, Mazda told us it'd first land in the CX-5 – and in fact, there's a part of the Mazda USA website devoted to the diesel crossover, which makes it seem more legitimate than previous pronouncements. But the fact of the matter is, there's some unforeseen hiccup in the government approval process for this engine, likely centered around emissions standards, and it seems to be dragging on. But this Mazda6 was spotted at an EPA facility in Michigan, which gives us some hope that perhaps the company is rounding the final base on the approval process. It looks very much like an American-spec Mazda6 to our eyes ... except for the strange, possibly temporary exhaust outlets, which might be required for EPA testing. The rear looks like a current-look car, rather than the revised 2018 styling that will get the 2.5-liter turbocharged gas engine. Since the Mazda6 was originally supposed to get the Skyactiv-D engine, we can only assume that if it's at an EPA facility, Mazda is hoping to bring it to market here – likely sometime after the CX-5 goes on sale. If Mazda can get approval, it'll be another point of differentiation between the Mazda6 and its competitors – there's no currently-approved diesel sedan that's a direct match. The smaller Cruze and larger, more expensive offerings from BMW and Jaguar are about it. The fuel economy guide (PDF) produced by the EPA back in late 2017 lists both the CX-5 and the Mazda6 as having diesel engines, but neither are rated, and as we know at this point, neither are on sale or have an official timeline for doing so. We can assume anything with an application in progress made it on the list, whether approval would be granted or not. It seems unlikely at this point that Mazda would abandon the Skyactiv-D in America. It's a solid part of their strategy, although a product roadmap released a few months ago shows that Mazda expects diesel sales globally to taper off after 2020, to be supplanted by plug-in gas hybrid, EV, and fuel cell vehicles. But between now and about 2030, pure diesel cars are expected to be a small but significant portion of Mazda's product mix. We hope this means we'll see the CX-5 emerge from the approval process and hit dealer lots soon, to be followed by the 6.