11 Mazda Miata Convertible 6 Speed Manual Rwd Leather Grand Touring Great Buy on 2040-cars

Auto blog

Mazda's new turbo four fits in both the 6 and the 3

Despite the size differences, the Mazda CX-9 shares a lot with its smaller car-based siblings, the Mazda6 and Mazda3. That could allow Mazda to slot its full-sizer's new 2.5-liter, turbocharged four-cylinder engine under the hood of its smaller offerings. Pardon us while we do a happy dance. "[The 2.5-liter turbo] fits in a lot of our cars, and where we're actually going to put it is another question," Mazda North America vehicle development engineer Dave Coleman told Australia's Car Advice. Coleman specified that the turbocharged engine will fit in all the same applications that can accommodate the company's 2.5-liter gas and diesel engines. "Basically, that big space we used for the bundle of snakes exhaust manifold, the turbo is in that space too. They're all packaged to occupy the same space. It's exactly the same clearance as the exhaust manifold of the other engines." This kind of logic – if Engine A is the same size as Engine B, then both should fit in Car C – is what's lead us to imagine a turbocharged Mazda6 since the new engine was announced. In short, it's great news. Mazda's 2.5-liter turbo is a hell of an engine in the CX-9, and it's hard to imagine it'd be worse in a lighter vehicle. But just because it works from an engineering standpoint doesn't mean it's going to happen. At least, not soon. "It fits. I'm not a product planner so I don't get to make that call," Coleman told Car Advice. "It's up to the product planners to decide what they're going to put it in." The most obvious application for a turbocharged engine in the 3 or 6 is as a reborn Mazdaspeed model. But don't get too excited – Coleman said Mazda hasn't even gotten as far as building an engineering prototype with this engine. We're still firmly at the theoretical stage. And that's bad news, because it gels with what we've been reporting – that Mazda will wait a generation for future Mazdaspeed models. We just stopped doing our happy dance. Related Video:

Mazda shows lightweight MX-5 Spyder and Speedster at SEMA

Ever since Mazda dropped the first teaser on us last week, we've been looking forward to seeing what it had in store for us at SEMA this year. Now we've seen it what Mazda has dubbed the MX-5 Spyder and MX-5 Speedster, and they were worth the wait. The Spyder goes vintage with a silver paintjob and a brown top stretched overhead. It also has an aero kit, grille, and tonneau cover done up in carbon fiber, rides on 17-inch wheels, and features a natural leather interior. The blue Speedster, meanwhile, goes for the stripped-down, wind-in-your-hair experience. It has no roof or windshield, just a tiny deflector at the front of the dashboard. It's dropped an inch closer to the ground on an adjustable coilover suspension with 16-inch alloys, and features a center-exit exhaust. Carbon fiber helps trim 250 pounds from the curb weight, along with a stripped out interior trimmed in Alcantara. Both look pretty slick, and disappoint only in so far as they (like so many of their predecessor concepts) won't be heading for production. If they were, we'd be hard pressed to choose between the two. Which would you go for? Mazda Reveals Extreme Lightweight Design Concepts at 2015 SEMA MX-5 Concepts Display Two Different Takes on Staying True to Pure, Lightweight Sports Car Philosophy LAS VEGAS (November 3, 2015) – Mazda revealed two design concepts today at the SEMA Show in Las Vegas, based on its all-new 2016 MX-5 Miata—MX-5 Spyder and MX-5 Speedster—demonstrating two vastly different takes on lightweight, open-air performance. Lightweight. Fun-to-drive. Roadster. Those three tenets have served as the foundation for the Mazda MX-5 Miata since its 1989 introduction and continue to serve the new fourth-generation model. Focused, lightweight engineering is a guiding principle of every Mazda vehicle made with SKYACTIV Technology, allowing for greater efficiency, improved performance and agile handling dynamics. But what if that sense of lightweight performance were taken to the extreme? What if Mazda's North American designers harkened back to vintage roadsters to create thoroughly modern, bespoke concepts for what a lightweight performance car should be The results would be the MX-5 Spyder and MX-5 Speedster concepts. "Both MX-5 Spyder and MX-5 Speedster are uncompromising designs that highlight the core strengths of MX-5," said Ken Saward, design manager, Mazda North American Operations.

2018 Mazda6 refresh takes the car further upmarket

The 2018 Mazda6 is, on the surface, a very mild refresh. The front grille has been given more depth, and the fascia is generally cleaned up a bit, putting the design inline with the new CX-5 and future Mazda products. The interior has been given the same treatment: cleaned up and modernized. But throughout the car, some important updates under the skin make the 6 a more compelling product, and one that continues the company's push upmarket. The biggest change has already been partly revealed, and that's the addition of Mazda's turbocharged 2.5-liter four-cylinder. It's the same engine found in the CX-9, and Mazda has now revealed it will make the same 250 horsepower and 310 pound-feet of torque with premium fuel. The engine will also happily accept 87-octane, in which case the engine will make 227 horsepower. Though the addition of this engine is welcome, we're a bit disappointed to learn that it will only be available with a six-speed automatic transmission. If we're lucky, we might see Mazda add a manual option, since when Mazda launched the current Mazda3, the larger 2.5-liter engine was initially only available with an automatic. But try not to get your hopes up too high, either. The good news is that Mazda will continue to offer a manual transmission as well as an automatic with the base, naturally aspirated 2.5-liter four-cylinder. This engine will now feature cylinder deactivation, as will the 2018 Mazda CX-5. This system will shut off the cylinders on each end at cruising speed to improve fuel economy. Official fuel economy ratings for both engines have yet to be released. Aside from the powertrain, Mazda says it has made a few other mechanical improvements. The suspension has been retuned, and the steering rack rigidly mounted to the chassis to improve handling. Thicker sheet metal for the rear wheel wells, thicker trailing arms, and a bevy of braces have also been added in order to reduce noise for a more refined driving experience. The interior has also been updated for more refinement, particularly on the new Signature trim model. The sleeker interior design on all Mazda6s is joined by redesigned seats Mazda says are more comfortable. Those seats are now available with optional ventilation. A windshield-projected heads-up display, adaptive cruise control that can bring the car to a stop and resume accelerating, as well as an instrument panel with a configurable 7-inch screen are other options.