08 Mazda Mx-5 Miatagrand Touring 2l I4 16v Manual Rwd Convertible Premium Bose on 2040-cars

Auto blog

2019 Mazda CX-3 crossover updated with a tad more power and refinement

NEW YORK — Mazda's smallest vehicle, the CX-3 subcompact crossover, is getting a refresh for the 2019 model year. Visually, you'd be hard-pressed to tell what changed, and that's because not much did. The grille now has slats that are grouped in pairs, and the rear taillights have been redesigned. But there are a number of changes aside from visuals that separate this model from the 2018. Under the hood is still a 2.0-liter naturally aspirated four-cylinder engine. It picks up two more horsepower and pound-feet of torque for totals of 148 for each, though Mazda says that it also picks up torque across more of the rev band and gets better fuel economy. Mazda didn't have official mileage numbers, though. The CX-3 will also now come with the G-Vectoring Control system that helps improve turn-in by reducing torque and shifting weight forward. The steering and suspension have been slightly retuned, and the tires developed to better absorb bumps. Deeper inside the CX-3, several changes should make the driving experience more calm and refined. These include thicker door panels and rear door glass to make things quieter. The seats are now wider with redesigned foam cushions for greater comfort. A new integrated armrest in the center console and one in the rear seats with cup holders help the same cause. Mazda will also add faux suede trim to the cabins of CX-3s for a more premium feel. Pricing hasn't been announced for the new CX-3, but the little crossover will go on sale in late spring. So expect pricing to come soon. Fuel economy numbers will likely be available soon, too. Related Video:

Fiat 124 spied with top down

With fall officially here, the days are rapidly running out for much of the country to put the top down and enjoy a convertible. Fiat apparently wants to take advantage of the good weather while it lasts, given these fresh spy shots of the 124 Spider testing with the roof down. In terms of styling, these photos show the droptop with an extremely similar look to the ones from July. The roadster still appears to have rounded headlights and a wide grille up front, which the kidney-shaped cladding does nothing to hide. The hood bulge continues to be there, too, and so is the spiderweb-pattern camouflage. However, these new shots let us check out the roll hoops that are visible with the top out of the way, and we even get to see the manual roof in operation. Also, note there are now dual exhausts at the rear, rather than the quad tips from before. Underneath all this camo and cladding, we know that the 124 Spider shares underpinnings with the new Mazda MX-5 Miata. The engine remains a mystery, but competing rumors suggest the 1.4-liter turbocharged four-cylinder from the current 500 Abarth or the 1.7-liter turbo four from the Alfa Romeo 4C. Thankfully, an answer might not be too far away because the roadster is mooted to debut this year, possibly at the Los Angeles Auto Show in November. With the latest Miata receiving high praise from critics, the motoring world soon gets to find out whether Fiat can find any room for improvement. Related Video:

1993 Mazda RX-7 Retro Review | A '90s hero turns 25

Boom times build interesting cars. In the late 1980s, Japan was flush with capital, and automakers spent like the party was never going to end. Suddenly building the third-generation RX-7 — the world's most advanced twin-turbo rotary sports car — seemed like the most natural thing a small car company hailing from Hiroshima could do. On this side of the Pacific, however, there was no context for the sudden influx of unusually tricked-out Japanese hardware flooding American dealerships. And none of the Japanese sports cars of the era was more unusual than the FD-generation Mazda RX-7, imported from 1993 to 1995 (and continuing on in Japan until 2002). Although the island nation's economy was headed on a downward spiral by the end of 1990, Mazda was in no position to pull back and walk away from the development dollars that had already been spent on its latest RX-7. As a result, Americans were able to briefly bask in the glow of one of the most unique engineering experiments ever unleashed on unsuspecting buyers. For its time, the Mazda RX-7 was a spaceship. With fluid lines that screamed "exotic," it joined the NSX in showing that supercars didn't have to have European blue blood running in their cooling systems to elegantly snag eyeballs. The twin-rotor, 1.3-liter 13B-REW situated behind the RX-7's front axle revved all the way to 8,000 rpm on its quest to produce 255 horsepower and 217 pound-feet of torque, with a pair of sequential turbos handing boost duties back and forth around the 4,500 rpm mark. A five-speed manual gearbox was standard with the FD (a four-speed automatic was optional), as was a curb weight in the neighborhood of 2,800 pounds — nearly 500 lbs less than the contemporary Toyota Supra. Significant figures for the era, to be sure. While they might pale in comparison to the average sports car today, slide into the RX-7's cockpit and drive the car, rather than just crunch the numbers. You'll quickly discover what can be accomplished when the company that engineered the Miata pulls a full John Hammond and "spares no expense" developing a world-beating sports car platform. The 1993 Mazda RX-7 I've been loaned from Mazda's classic collection is an R1 car, which means tighter suspension tuning, a few cosmetic upgrades, and a Competition Yellow paint job.