2022 Mazda Cx-9 Touring on 2040-cars

Auto blog

Feds investigating Mazda CX-9 over suspension problems

The National Highway Traffic Safety Administration is opening a preliminary evaluation into the 2007-2008 Mazda CX-9 because the lower ball joint in the front suspension can potentially separate while driving. An estimated 54,000 examples of the crossover might be affected. The investigation was prompted by six complaints of this happening on the road. Because the complaints are coming more rapidly as of late, NHTSA thinks the issue could be getting worse. The problem also appears to be more prevalent in states that use salt on their roads in the winter. None of the failures caused any injuries, and all but one happened at 20 miles per hour or slower. NHTSA's preliminary evaluations "assess the scope, frequency, and safety consequence" of a potential problem and can sometimes lead to recalls. Related Video: INVESTIGATION Subject : Front Suspension Ball Joint Separation Date Investigation Opened: JUN 09, 2015 Date Investigation Closed: Open NHTSA Action Number: PE15022 Component(s): SUSPENSION All Products Associated with this Investigation close Vehicle Make Model Model Year(s) MAZDA CX-9 2007-2008 Details Manufacturer: Mazda Motor Corp. SUMMARY: The Office of Defects Investigation (ODI) has received six (6) complaints (VOQs) alleging incidents of front suspension LBJ separation in MY 2007 through 2008 Mazda CX-9 vehicles. The reports appear to show an increasing trend. One of the separations allegedly occurred at 40 mph and the other 5 incidents occurred at speeds between 0 and 20 mph. The first VOQ was received in October 2013, followed by 2 reports in late 2014 and 3 reports in the first 5 months of 2015. Four of the VOQs are from states using high volumes of road salts (?salt states?) which, for purposes of this investigation, include: Connecticut, District of Columbia, Delaware, Illinois, Indiana, Iowa, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, West Virginia, and Wisconsin. The other VOQs were from northern Virginia, which borders the ?salt state? region, and South Carolina. ODI also identified EWR field report data related to the alleged defect in the subject vehicles. A preliminary investigation is being opened to assess the scope, frequency, and safety consequence of the alleged defect. The six VOQs associated with this investigation are: 10717510, 10714469, 10695142, 10668978, 10640541, and 10546535.

2021 Mazda3 to gain a turbocharged engine, finally, probably

Buckle up, Mazda fans. The Mazda3 turbo might really be happening, says a report from Jalopnik. Some details from Mazda’s dealership extranet system observed by Jalopnik suggest weÂ’ll see a 2021 Mazda3 turbo in both sedan and hatchback form. We donÂ’t have eyes on the documents ourselves, but the report says both the sedan and hatchback versions will be all-wheel-drive only with no option for front-wheel drive. In addition to that, it looks like the turbo models will be exclusively automatic, as theyÂ’re both only listed as “6A” in MazdaÂ’s system. Sorry to break the hearts of those who were hoping for a manual turbo. The hatchback manual with the naturally aspirated 2.5-liter from the modelÂ’s first two years appears to be sticking around for a third, in case you were worried. There is one minor mystery that's a possible glimmer of hope for someone wanting more performance, though. The report says that a “MAZDA3 HB PP TURBO” is listed in the docs. Our hearts are yearning for the PP to stand for Performance Package, but it probably stands for “Premium Package.” ThatÂ’s the name of MazdaÂ’s highest trim Mazda3 right now, and itÂ’d make sense to offer the turbo engine on the upmarket model. The last we heard on this front was from a report published over a year ago. It suggested MazdaÂ’s 2.5-liter turbocharged four-cylinder as a possible drop-in. That motor makes 250 horsepower and 310 pound-feet of torque on premium fuel and would be a big upgrade to the 186 horsepower and 186 pound-feet of torque made by the naturally aspirated 2.5-liter under the hood now. Without a manual, the obvious transmission would be MazdaÂ’s traditional six-speed automatic. ItÂ’s a solid transmission for cars like the Mazda6 and CX-5, but itÂ’s not meant for sports cars, as we recently found in the automatic Miata RF. So no, this Mazda3 turbo wonÂ’t be a Mazdaspeed. It would simply be a quicker Mazda3, and while we can still pine for a true Mazdaspeed, this will be a welcome addition to the lineup. ThereÂ’s even more ancillary news in the report, too. The docs that Jalopnik saw say weÂ’ll be getting a Mazda3 with a 2.0-liter four-cylinder in 2021. That one has to be the Skyactiv-X engine weÂ’ve been patiently waiting for. It has already launched in Europe, but was delayed in the U.S. Those 100th Anniversary Edition Mazdas get a callout, too. The Mazda3 version of that is reportedly set to be equipped with the turbo engine, making that particular model even more enticing.

Did Mazda designer Derek Jenkins leave to head up a 'Stealth Project?'

Not long after Derek Jenkins officially gave the 2016 MX-5 Miata to the buying world, he's left the Mazda building. Jalopnik reported that the head of design for Mazda North America changed the current job description on his LinkedIn profile to "Stealth Project." Mazda backed up the discovery with this reply to Jalop's inquiry: Derek left Mazda last Friday. He left on great terms in order to work on a new endeavor. We wish him the best of luck. He will be missed, but we are sure that he will do great things in the next chapter of his career. That "last Friday" would be July 17. Emphasizing the "stealth" bit in his new position, as far as we can tell, Jenkins still hasn't publicly answered any question about what he's doing. Every automaker has secrets, but traditional automakers usually make a hubbub about hiring big-name designers, especially one with Jenkins' resume. For his new employer to go all Ghost Recon with all information, well that's the kind of mystery this summer needs. The obvious culprit would be a certain fruit-named company in a certain Cupertino, CA office park. If that ends up being the case, Jenkins would be the second chief designer at Mazda NA to go electric: he replaced Franz von Holzhausen in the position after von Holzhausen went to Tesla. Various other Apple Project Titan hires have made the news, though. For all we know, Jenkins' project might not be automotive. So let's just go ahead and cue the speculation. We're looking forward to whatever he's got coming, and to whoever gets nominated to keep the full head of Zoom-Zoom going at Mazda NA.