Factory Warranty Cd Player Alloy Wheels Cruise Control Off Lease Only on 2040-cars

Auto blog

2014 Mazda CX-5 with 2.5-liter Skyactiv engine

Back in October, we compared the relative merits of two new and very good small crossovers: the 2013 Ford Escape and 2013 Mazda CX-5. The CX-5 we tested then had Mazda's 2.0-liter Skyactiv-G engine under its hood, and it managed to just edge out the EcoBoosted Ford despite being down by some 23 horsepower and 34 pound-feet of torque. Had it been available, the 2.5-liter Skyactiv engine that we recently had the opportunity to try out in the 2014 Mazda CX-5, it may have made that comparison even easier to call in the Japanese CUV's favor.
Clearly, if you're in the market for a reasonably sized crossover, the CX-5 should, at the very least, be on your test-drive list. The new engine offering will let buyers opt for a stronger powerplant, with 184 hp and 185 lb-ft on tap. On our second day in Austin's Hill Country - the first was spent quick-spinning the 2014 Mazda6 i Sport, you'll recall - we covered a couple of hundred miles and put the new CX-5 through its paces; here's what we turned up.
Driving Notes

Mazda CEO says rotary not viable, so don't look for a new one

We have some very sad news to report, rotor-heads fans: Don't expect a new rotary-powered vehicle anytime soon. This comes straight from Masamichi Kogai, the CEO of Mazda, which is the only company to ever market a commercially successful rotary-powered automobile in the world. The issue, as it has pretty much always been, is environmental.
While the Wankel rotary engine does indeed make a lot of power in a small, lightweight package, it does so while burning lots of fuel and emitting lots of noxious gases into the atmosphere, at least when running on gasoline. And that means the rotary engine will likely only ever be able to power niche vehicles. And that, in turn, means that it is very difficult to turn a profit on vehicles with rotary engines, particularly for a small automaker like Mazda.
"It has to be a viable commercial proposition. If we are going to adopt it, it has to be a product that can generate at least sales of 100,000 units a year. We have to be able to achieve a profit," said Kogai in an interview with Automotive News. Mazda sold 56,203 RX-7 models in the United States (the automaker's biggest market) in 1986. Sales of the RX-8 peaked in 2004, its first full year on the market, with just 23,690 units.

Mazda 16X rotary engine two years away, will arrive in all-new model

We last reported on Mazda's next-generation rotary engine project in June of 2012 when the automaker built its last Renesis-powered RX-8, but rumors of this new engine's development had been around way before that final car left the production line in Japan, last year.
We now have enthusiastic confirmation that this next-gen rotary engine is really and truly going forward. It is still referred to as 16X and has several priorities. First is to lower fuel consumption compared to the RX-8's engine, while still making gains in terms of performance. The second is to reduce the burning of oil that was happening at the highest revs. And the third and final priority, and perhaps most key for enthusiasts, is to give the powertrain a big torque upgrade.
What we were told by a Mazda USA insider (while we are all here together at the festivities in Monterey) is that the first application of the new 16X engine will be happening in two years' time in an as yet undisclosed new model. Oh, the mind races to our eternal Mazda wish list...