Carfax Certified -- 28 Mpg Highway -- Nicely Equipped -- Warranty! on 2040-cars

Auto blog

Mazda CX-9 Luggage Test | How much fits behind the third row?

We recently tested the luggage-carrying capability of one of the most spacious three-row crossovers, the Hyundai Palisade, and now it's time for one of the smallest. The Mazda CX-9 may look terrific and drive even better, but that zest comes at the expense of cargo capacity, as we're about to see. The big culprit is that rakish liftgate, which not only robs the CX-9 of luggage space, but third-row headroom as well. It's pretty dungeon-like back there despite competitive legroom, and there aren't any air vents or USB ports, either. But this is about cargo capacity, so let's see how much luggage will fit inside. According to the specs, the CX-9 has 38.2 cubic-feet with the third-row lowered. That's far less than the Palisade's 45.8 and Honda Pilot's 46.8. It's actually even less than the five-passenger Honda Passport (50.5).  The test car came with a $100 cargo mat, which is velcroed to the seats and folds OK with it, but the carpet also takes up some extra space ... and the CX-9 needs as much as it can get.  To raise the seats, lean inside and pull up/back on those two handles. There is 14.4 cubic-feet of space behind the raised third row. On paper, that is indeed one of the smaller amounts in the segment, but in practice, it seems even smaller.  You can free up space by removing the rigid floor panel. If you need to carry multiple pieces of luggage, it's almost a necessity.  OK, so I have two midsize roller suitcases, both of which would need to be checked. Then there's two larger carry-on roll-aboards and one smaller one. As a bonus, there's my wife's quasi-fancy weekend bag. It was a struggle to fit three of them aboard, and Tetrised together two formations. The first uses all three carry-on bags with the cargo floor removed. And no, the fancy bag won't fit atop the blue one because it'll run into the liftgate window. A smaller tote would definitely fit, however.  This is how I could fit one of the bigger check-in bags. The liftgate just barely closed. Again, you could fit a small tote atop the blue bag, plus some other items in the lower outboard regions.  OK, so how could you fit everything aboard? Lowering half of the 50/50-split third row is a must, obviously. Both big check-in bags then stack atop each other, and then stack the other four atop each other with the cargo floor in place.

Mazda's Tokyo concepts have us wishing for more Mazdaspeed

It's been a while since we've seen any new Mazdaspeed machinery, and we're sorry to report that today isn't the day the wait ends. But if you want to see what they might look like based on Mazda's latest models, the Tokyo Auto Salon will be the place to be in a couple of weeks. Turns out the Zoom-Zoom brand has a whole raft of performance models in store for the aftermarket expo. Most intriguing to our eyes is the trio of Racing concepts – one based on the MX-5 Miata roadster, one on the CX-3 crossover, and one on the Mazda6 sedan. Each is done up in black with full aero kit, new rolling stock, and Alcantara interior. An adjustable suspension is the big change to the MX-5 – known simply as the Mazda Roadster in Japan – which also features red trim. As does the CX-3, while the Atenza (which we know as the Mazda6) goes for a more monochromatic, murdered-out appearance. The rally-prepped Mazda2 (known domestically as the Demio) focuses on a stripped-out interior with bucket seats, racing harnesses and a roll cage. There's a spec racing MX-5 in white livery with roll cage and tow hooks as well to join the Global Cup roadster we've already seen. That also goes for the RX-Vision and LM55 Vision Grand Turismo concepts which have already made the rounds but will be on display at the Tokyo salon as well. But it's those three Racing concepts that leave us salivating for production performance models to come – and hopefully come to North America in the process. Related Video:

Mazda development chief discusses future rotary platform

The switch can again be flicked from "The Rotary Engine is Doomed" to "The Rotary Engine Lives!" Mazda is re-tooling the once nearly forgotten rotary to work as a range extender for hybrid vehicles, with a chance for it to do even more than that. The latest information sounds rather promising for those still holding out a candle for the rotary. Mazda's powertrain development chief, Ichiro Hirose discussed future rotary plans with the Australian Drive at the CX-30 crossover's launch. Hirose told Australia's Drive that Mazda is currently working with a very flexible and efficient rotary hybrid platform that doesn't necessarily come with the heavy emissions and fuel consumption baggage the rotary engine has earlier been saddled with. Hirose calls the rotary-based solution "XEV," referring to its adaptability. "It has the generator function and also it can be used to provide the drive force to give you traction. [...] Because the rotary engine is compact in terms of its packaging size [and] if we should choose to do so we can have the generator, rotary engine and electric motor all in one [driveline] because of the small packaging." The result is an electrified platform that could be made to work as a mild hybrid, series hybrid or a battery electric vehicle with a rotary range extender (if given a plug), depending of the required implementation. It's as if Mazda had a slider to adjust the balance of using a rotary engine and using electric power, to make the platform more of a jack-of-all-trades. Hirose explained: "If you reduce the other way around it could be a pure battery-electric, using really the rotary engine as a range extender and, according to the balance, you can even provide something akin to the series hybrid that is providing the drive force. [...] So, we are looking at a wider coverage and scope. Based on this architecture it allows us to do that, to explore the huge range of applications we can have with the rotary." The platform would also be flexible when it comes to meeting various stringent emissions standards. To be able to sell XEV-based vehicles globally would mean introducing a certain setup for one region and one for another, keeping in mind when the rotary power would kick in and how. While Hirose keeps the question open whether these vehicles would make it for sale in the United States, he says Mazda would be able to make them pass U.S regulations. "I'm just saying that — theoretically — if we were to introduce it in the U.S.