2008 Mazda Cx-7, Black On Black With 100k Warranty on 2040-cars

Auto blog

Mazda Slovakia brochure reveals Skyactiv-X Euro power numbers

After driving a prototype of Mazda's Skyactiv-X engine in a Mazda3 in January last year, we wrote, "If you want to talk numbers, they're understandably fuzzy. The Skyactiv-X tune isn't final yet, so horsepower and torque figures are a moving target." They're no longer fuzzy in Slovakia, where a brochure for the new Mazda3 sells final figures as 181 metric horsepower and 222 Newton-meters, or 178 horsepower and 164 pound-feet. We don't know the Slovakian engine's displacement. If that Skyactiv-X is a 2.0-liter, it compares to our 2.0-liter Skyactive-G in the Mazda3 that makes 155 hp and 150 lb-ft, or the tuned Skyactiv-G in the 2019 Miata that makes 181 hp and 151 lb-ft. According to the spec sheet on the Slovakian Mazda site, their 2.0-liter Skyactiv-G in the CX-3 makes 148 hp and 152 lb-ft, and in their Mazda6 makes 162 hp and 155 lb-ft. According to the brochure, those numbers will rise to 164 hp and 157 lb-ft in the coming Mazda3. The Skyactiv-X numbers are in sight of what reps at Mazda in California gave us for output during our drive, which was closer to 190 hp and 180 lb-ft. Mazda said at the L.A. Auto Show last year that the Skyactiv-X would launch in markets with stricter emissions regulations first, so a small European market with tighter controls doesn't define what we get. Given our less restrictive environment, tuning for more power shouldn't be a moon shot. Doing so would put the Skyactiv-X in with the optional 2.5-liter four-cylinder in the U.S. Mazda3, which makes 184 hp and 185 lb-ft. The real test will be gas mileage; the purpose of the Skyactiv-X is to provide those figures in company with 20 to 30 percent better fuel economy than the Skyactiv-G. Autoweek characterized Mazda CEO Akira Marumoto's comments on the engine as, "The Skyactiv-X variant will be positioned as the higher grade. It will have the driving dynamics of the 2.5-liter gasoline setup but the fuel economy of a 1.5-liter diesel." We have questions about this strategy, but we'll have to see how the pricing works out. Since the 2.5-liter serves as the base engine on the 2019 Mazda3, buyers can expect a meaningful premium to get into a Skyactiv-X. Right now, there's a $1,495 surcharge to go from the current 2.0-liter Mazda3 hatch to the 2.5-liter.

Finalists for 2014 Green Car of the Year announced

The list of finalists for the 2014 Green Car of the Year has been announced, and in a genuinely bizarre twist, there's only one hybrid and no electric vehicles among the five contestants, despite the arrival of cars like the BMW i3 and Tesla Model S. Taking the place of the EVs are a pair of diesels, repping a technology that last won a Green Car of the Year award in 2009, when the Audi A3 TDI took the title. No diesel was in the running for last year's award.
Naturally, both of the diesel finalists are fielded by the Germans - with BMW's 328d and Audi's A6 TDI getting the nod. In the case of the 3 Series, BMW installed a 2.0-liter, turbodiesel, capable of delivering 180 horsepower and 280 pound-feet of torque, while returning 45 miles per gallon on the highway. Audi and its larger, 3.0-liter, V6 turbodiesel produce quite a bit more grunt, with 240 hp and 428 lb-ft of grunt, but net a very impressive 38 mpg on the highway in the A6.
Finalists for this year's awards include two diesels, three gas-powered cars and a plug-in hybrid.

Tougher than steel: Wood pulp could make lighter auto parts

KYOTO, Japan — The global push among carmakers to make ever lighter vehicles is leading some auto suppliers in Japan to turn to what seems like an unlikely steel substitute — wood pulp. Japanese researchers and auto component makers say a material made from wood pulp weighs just one-fifth of steel and can be five times stronger. The material - cellulose nanofibers — could become a viable alternative to steel in the decades ahead, they say, although it faces competition from carbon-based materials, and remains a long way from being commercially viable.> Related: Jay Leno drives the Renew cannabis car — hemp you can't dent Reducing the weight of a vehicle will be critical as manufacturers move to bring electric cars into the mainstream. Batteries are an expensive but vital component, so a reduction in car weight will mean fewer batteries will be needed to power the vehicle, saving on costs. "Lightweighting is a constant issue for us," said Masanori Matsushiro, a project manager overseeing body design at Toyota. "But we also have to resolve the issue of high manufacturing costs before we see an increased use of new, lighter-weight materials in mass-volume cars."A NEW PROCESS Researchers at Kyoto University and major parts suppliers such as Denso Corp, Toyota's biggest supplier, and DaikyoNishikawa Corp, are working with plastics incorporated with cellulose nanofibers — made by breaking down wood pulp fibers into several hundredths of a micron (one thousandth of a millimeter). Cellulose nanofibers have been used in a variety of products ranging from ink to transparent displays, but their potential use in cars has been enabled by the "Kyoto Process," under which chemically treated wood fibers are kneaded into plastics while simultaneously being broken down into nanofibers, slashing the cost of production to roughly one-fifth that of other processes. "This is the lowest-cost, highest-performance application for cellulose nanofibers, and that's why we're focusing on its use in auto and aircraft parts," Kyoto University Professor Hiroaki Yano, who is leading the research, told Reuters in an interview. The university, along with auto parts suppliers, are currently developing a prototype car using cellulose nanofiber-based parts to be completed in 2020.