2021 Mazda Cx-3 Preferred on 2040-cars

Auto blog

Confirmed: Mazda Miata gets more power, higher redline, telescoping wheel

Our friend over at Road & Track, Bozi Tatarevic, has a keen nose for stuff just like today's Miata news, and he spotted an article by the Japanese car magazine Car Watch that details Mazda's upcoming updates. Car Watch actually got to drive the car, too. There's a lot to go through, but the highlight has to be confirmation of what we told you earlier this year about a significant power bump: The Miata will indeed get an increase of 26 horsepower, from 155 to 181. But the power's not the whole story. Mazda has increased the redline from 6,800 RPM to 7,500. It's not clear at this point where torque and power peaks are in the rev range, or how these changes affect low-speed drivability, but more revs are almost always a good thing and aren't likely to detract from the roadster's fundamental goodness. Car Watch reports that lighter pistons and connecting rods are fitted to help reduce rotational mass in the 2.0-liter inline-four. Some valvetrain changes were needed to support the higher redline, mainly stiffer valvesprings to prevent valve float. Mazda also changed the shape of the valves and optimized the intake ports to breathe better at higher RPM. The inner diameter of the exhaust ports were increased to flow better through a new muffler better tuned to the engine's new operating range. This confirms and gives a little more detail to what we reported earlier based on a leaked document from Mazda Canada. Car Watch also confirms that the revised Miata will get a low-inertia dual-mass flywheel, which should help absorb some vibration, noise and harshness from the higher-revving engine without losing too much of the directness that a single-mass flywheel provides. Mazda usually gets stuff like this right, so while we won't know until we get a chance to drive it whether the DMF feels "right," we're not too worried about it. There's also a telescopic steering wheel, a first in any Miata, which has a range of about 1.1 inches. That doesn't sound like much, but it should help folks with longer legs reach the wheel without having to crank the seat forward. Interestingly, Car Watch reports that the telescoping wheel was opposed by some in the company seeking to save every fraction of an ounce of weight, and to get it through, the company apparently had to change some of the material in the upper steering column from steel to aluminum to satisfy the weight-conscious. Little details like these are fantastic.

The spirit of these 7 weird Mazdas lives on in today's cars

HIROSHIMA, Japan — When visiting the Mazda Museum in Hiroshima, housed amidst the company's main manufacturing site on the shore of the Enko River, you can follow Jujiro Matsuda's early 20th century entrepreneurial path from artificial cork manufacturer to machine and machine toolmaker, to motor vehicle producer. But probe a bit deeper into the exhibits, and you can uncover more than just a chronicle of corporate achievements: delightfully weird outliers, paragons of oddball design, engineering and marketing solutions It's looking at these delightful misfits that really illustrates Mazda's tale. You can also see precisely how many of these vintage conveyances led directly (or indirectly, or obtusely) to Mazda's most iconic American-market cars and trucks. Our seven favorite precursors, and their lovable successors, are listed below. 1931 Type TCS/Mazda B-Series Mazda's first vehicle was this little three-wheeler, powered by an air-cooled, one-cylinder motor. Because the company lacked a distribution network at the time, the trucklet was marketed by Mitsubishi; hence the three-diamond pattern on its side. All of this is very reminiscent of the company's eventual foray into the U.S. market, where its sales were spearheaded by compact pickups. The B-Series, which was one of the first Mazda vehicles available in the U.S., arrived in 1972, and stuck around through the first decade of the 21st century. Like its partnership with Mitsubishi, Mazda teamed up with stakeholder Ford to market this little truck as Ford's first small pickup, the Courier, the precursor to the Ranger. There was even a rotary-powered B-Series for a few years, but we're getting ahead of ourselves. 1968 Bongo Van/Mazda5 The Bongo allegedly was the first one-box van design in Japan, and apparently it was so popular that the name Bongo became, for a period of time, the generic metonym for the category—the way that Kleenex is a stand-in for all facial tissue. With a tiny rear-mounted engine and a planar expanse of metal to push around, it was not particularly fast, but it was both spacious and innovative. The same could be said of the brand's mini-minivan, the Mazda5, which was available for a couple of generations in the States in the Aughties. Sadly, the name 5 never caught on as a synonym for fun-to-drive family hauler, at least not yet, and the category itself (like nearly every other car category) was crushed in America by the rise of the crossover.

2014 Mazda6 earns Popular Mechanics' 'Car of the Year'

Ring one up for Mazda. The Japanese brand's midsize offering, the Mazda6, has been named Popular Mechanics' Car of the Year. The 6 received a comprehensive reworking for the 2014 model year that saw it adopt sleek, sexy sheet metal; a clean, logical interior; and powertrain technologies that allow it to net some of the best fuel economy available in a gas-powered, non-hybrid sedan.
Popular Mechanics praised the 6's Skyactiv 2.5-liter, 184-horsepower engine, as well as its agility and responsiveness during testing. It also remarked on the functional, but well designed cabin, and the degree of available technology.
"The Mazda6 really impressed us with how well it delivers so many things modern car owners want: great mileage, fun road-handling, upscale features and looks - and remarkable value," said Jim Meigs, Editor-in-Chief of Popular Mechanics.