B400 * V6 4x4 * Manual * No Reserve on 2040-cars

Auto blog

2020 Mazda MX-5 Miata due for price bump, more safety tech

Mazda hasn’t released official information yet on its 2020 MX-5 Miata, but CarsDirect got its hands on an early draft of an order guide, which suggests both the soft- and hard-top versions of the roadster are due for a price bump after receiving more standard safety technology and some suspension upgrades on certain manual models. Starting price on the 2020 Miata Sport Soft-Top will be $26,580, not including destination, which is reportedly not yet listed, according to the report. ThatÂ’s $850 above the non-inclusive 2019 base price. The price hike on the Grand Touring trim is even higher, at $1,090. For the RF Club Hardtop, starting price inches up by $700 to $33,045 — again, excluding destination, which was $895 for 2019. If you want to drive stick, prepare to pay more for the Grand Touring manual versions, which will climb by $890 and $1,090 for the soft- and hard-top versions, respectively. ThatÂ’s down to new Bilstein shocks, a limited-slip differential, front shock tower braces and a sport-tuned suspension, which should make for fun driving for stick enthusiasts. The big news is that the i-Activesense suite of safety technologies, previously offered as a package, will go standard across all trim levels. It features lane departure warning, blind-spot monitoring, rear cross-traffic alert and low-speed automated braking. Apple CarPlay and Android Auto will also reportedly debut on both versions of the roadster as standard on Club trims and above. The Miata is already coming off a 2019 when it got an infusion of 26 more ponies and 3 pound-feet, bringing output to 181 hp and 151 lb-ft from its 2.0-liter Skyactiv-G inline-four engine, plus that limited-edition 30th Anniversary model. Looking ahead, Mazda is reportedly toying with the idea of electrifying its lightweight roadster for its next generation, expected mid-next decade. Related Video:

2019 Mazda MX-5 Miata First Drive Review | More power is the icing on top

SAN DIEGO — When Mazda announced that the 2019 Mazda MX-5 Miata was getting a serious increase in power, I was both excited and nervous. I was excited because more power is always exciting, and it was no insubstantial increase. At 181 horsepower, it's the most powerful production Miata ever offered, beating out turbocharged Mazdaspeed Miata's 178 horsepower. Plus it has more revs to play with. But what had me worried was whether this power would mess up the friendly, playful character of the Miata. The 155-horsepower 2.0-liter engine is just about perfect, almost universally loved by the Autoblog staff and other reviewers, with good midrange torque and short gearing that always made it feel quick in nearly every rev range. It felt like the right amount of power for the chassis, too. There was just enough to get it loose without working too hard, but it wouldn't spin you around unexpectedly. I could imagine a couple of ways the new engine could affect that sweet balance, too. A bit too much power could risk some of the Miata's accessibility and predictability. It might become more serious and less fun-loving. I also feared that in pursuit of a higher redline and more horsepower, the low-end of the rev range might become painfully slow. Honda owners know this feeling whenever their VTEC-equipped screamers drop out of the aggressive cam profile, and the Toyota 86 and BRZ suffer from an awful lack of torque right in the mid-range that doesn't recover until nearly redline. All of this was on my mind when the assembled reviewers were briefed by Mazda engineers about the car. It started out like most presentations, with a brief rundown of the goals of the car and what Mazda has done with the model so far. Then came a chart showing the power curves of the NC, current ND, and the 2019 model, and my fear of a loss of low-end grunt dissipated. The amount of power and torque over engine speed is nearly identical between the old and new ND Miatas right up to around 4,500 rpm. And then from there, the 2019 continues making more power all the way to its 181-horse peak at 7,000 rpm, 500 rpm higher than the previous model's redline. This was a good sign. Mazda managed to get these gains with no sacrifices through many small upgrades. The throttle body is wider with a slimmer throttle plate, the intake manifold has longer runners and dual paths, and the intake ports are larger.

Toyota delays Mexico plant as it plans U.S. plant with Mazda

TOKYO — Toyota will push back the start of operations at its scheduled new plant in Mexico, to the first half of 2020 from the initial plan of 2019, the company said on Thursday. Japan's top automaker had initially planned to start building the Corolla sedan at the $1 billion Guanajuato plant but said last week it would switch production to a new U.S. factory to be built with Mazda. Toyota said the delay was necessary to adjust its supply chain in Mexico to produce the Tacoma pickup instead of the Corolla compact car. That factory could also build sport utility vehicles, a Toyota spokesman in Mexico said last week. "With the production model change to the Tacoma pickup, the start of production will consequently be in the first half of 2020," a Toyota spokeswoman said. "However, we will make our utmost effort to advance the timing in order to minimize the impact to suppliers and the local community." Until the scheduled start of the joint venture plant with Mazda in 2021, Toyota will supply the Corollas that were initially slated to be built in Mexico from its factories in Mississippi and Japan, the company said.Related: Mazda-Toyota partnership has us dreaming of a rotary hybrid Reporting by Makiko YamazakiRelated Video: