1986 Mazda B2000 Base Standard Cab Pickup 2-door 2.0l on 2040-cars

Auto blog

Mazda recalling 18k Mazda6 and RX-8 models over airbag inflators

Faulty Takata airbag inflators keep taking their toll on automakers. Mazda is the latest to be affected in the US by announcing a recall covering 18,050 Mazda6 and RX-8 models to replace the front, passenger-side airbags. Specifically, the campaign covers 18,000 Mazda6 units from the 2003 and 2004 model years built between May 29, 2002, and March 4, 2004, and 50 RX-8 vehicles from the 2004 model year made between June 25, 2003, and June 30, 2003.
As with the rest of the vehicles with these faulty inflators, it's possible for the part to rupture when deploying the airbag and potentially spray shrapnel at the occupant. Mazda's defect notice goes into a bit more detail than most about the problem saying: "some propellant wafers have been produced with an inadequate compaction force, or may have been exposed to uncontrolled moisture conditions (those wafers could have absorbed moisture beyond the allowable limits)."
This isn't Mazda's first difficulty with Takata-supplied airbags this year. The company was among the seven automakers that recalled vehicles in hot-weather states over the inflators. It also had to recently fix 42,000 Mazda6 vehicles in China over the issue.

Confirmed: Mazda Miata gets more power, higher redline, telescoping wheel

Our friend over at Road & Track, Bozi Tatarevic, has a keen nose for stuff just like today's Miata news, and he spotted an article by the Japanese car magazine Car Watch that details Mazda's upcoming updates. Car Watch actually got to drive the car, too. There's a lot to go through, but the highlight has to be confirmation of what we told you earlier this year about a significant power bump: The Miata will indeed get an increase of 26 horsepower, from 155 to 181. But the power's not the whole story. Mazda has increased the redline from 6,800 RPM to 7,500. It's not clear at this point where torque and power peaks are in the rev range, or how these changes affect low-speed drivability, but more revs are almost always a good thing and aren't likely to detract from the roadster's fundamental goodness. Car Watch reports that lighter pistons and connecting rods are fitted to help reduce rotational mass in the 2.0-liter inline-four. Some valvetrain changes were needed to support the higher redline, mainly stiffer valvesprings to prevent valve float. Mazda also changed the shape of the valves and optimized the intake ports to breathe better at higher RPM. The inner diameter of the exhaust ports were increased to flow better through a new muffler better tuned to the engine's new operating range. This confirms and gives a little more detail to what we reported earlier based on a leaked document from Mazda Canada. Car Watch also confirms that the revised Miata will get a low-inertia dual-mass flywheel, which should help absorb some vibration, noise and harshness from the higher-revving engine without losing too much of the directness that a single-mass flywheel provides. Mazda usually gets stuff like this right, so while we won't know until we get a chance to drive it whether the DMF feels "right," we're not too worried about it. There's also a telescopic steering wheel, a first in any Miata, which has a range of about 1.1 inches. That doesn't sound like much, but it should help folks with longer legs reach the wheel without having to crank the seat forward. Interestingly, Car Watch reports that the telescoping wheel was opposed by some in the company seeking to save every fraction of an ounce of weight, and to get it through, the company apparently had to change some of the material in the upper steering column from steel to aluminum to satisfy the weight-conscious. Little details like these are fantastic.

Mazda's Skyactiv-X power and efficiency ratings released in Europe

Mazda's long-awaited Skyactiv-X engine is finally headed for production, though not yet for the United States. The Japanese automaker says "various European countries" will get access to the unique engine in the Mazda3 starting this fall. Still, the announcement is relevant to the rest of us because we now have official power levels and fuel efficiency numbers that we can use to compare the Skyactiv-X with other engines offered in the compact Mazda. First, the power. According to Mazda, the 2.0-liter Skyactiv-X makes 178 horsepower and 165 pound-feet of torque. By way of comparison, the 2.5-liter Skyactiv-G engine currently used in the Mazda3 here in the States makes 186 hp and 186 lb-ft of torque. Sure, it's a little less powerful, but note that the displacements don't match and remember that the real reason the Skyactiv-X exists is to reduce fuel consumption. And that brings us to the Skyactiv-X's combined rating of around 53.5 miles per gallon (converted from liters per 100 kilometers). That's around 8 mpg better than the 2.0-liter engine that comes standard in Europe. Before we go any further, it's important to note that these numbers represent official figures for the European NEDC combined cycle, which means they are not directly comparable to the ratings we'll get from the United States EPA. Our official ratings will almost certainly be lower. With that disclaimer out of the way, the 2.5-liter Mazda3 scores a combined 30 mpg here in the States. The obvious unanswered question is when the Skyactiv-X might actually come to America. And the unfortunate answer is that we don't know. Mazda has yet to make an official decision on timing for the U.S market's launch of the engine, but as soon as we know, so will you.