2002 Mazda 626 Es Low Miles One Owner Very Clean No Reserve on 2040-cars

Auto blog

'Ringbanana' Miata is improbable 9-minute Nurburgring car

The combination of being inexpensive, capable, reliable, and friendly to all skill levels makes the Mazda Miata one of the world's most popular platforms for motorsports, but the roadsters aren't exactly rocketships. What would it take to lap a ratty, first-gen example around the Nurburgring Nordschleife in less than nine minutes? We're not exactly sure, but the Ringbanana team intends to discover the answer. The project is the type of thing that gets dreamed up after a few too many pilsners: buy the cheapest running Miata available and put as little money necessary into the roadster to make it capable around the 'Ring. As the Best-Motoring-inspired intro explains, the Mazda is largely stock other than some Fulda performance tires, possibly aftermarket springs, and a stripped interior. The video above shows the baseline test, and the convertible manages a 9:21.8 circuit, which doesn't seem too bad as a start. The video below goes into far more detail about the project's genesis and its goal. Plus, the two hosts are quite entertaining when replying to the comments from the original clip. We wish them the best of luck and look forward to following along on Facebook to see what it takes to get the Ringbanana below nine minutes. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

Mazda files patents for a sequential twin-turbo setup

Mazda has a history of interesting engine technologies, from yesterday's rotary engine to tomorrow's compression ignition engine, and new patents show it still may have some internal combustion tricks up its sleeve. The one on display in these patents isn't especially new in concept, though. A sequential twin-turbocharger setup is something Mazda itself used on the third-generation RX-7. But it's something we haven't seen much of lately. It looks like it could have some possible advantages over older sequential systems, and it has some potential advantages for enthusiasts. First a quick and dirty primer for what makes a sequential twin-turbo system distinct from other twin-turbo systems. In many twin-turbo engines, there are simply two turbos that work together as one bigger turbo. They're the same size, and they spool up at the same time. With a sequential setup, at low rpm, a smaller turbocharger is spooled up first at low-rpm for quicker throttle response, and as the rpm and exhaust pressure increases, a valve opens up that allows a larger turbocharger to also spool up and provide high-rpm boost. That's basically how the Mazda design shown above functions. A big flap blocks off the larger turbocharger exhaust inlet, channeling all the exhaust to the smaller turbo. When more exhaust is available at high rpm, it looks like that flap opens up to spool up the big turbo, too. What's interesting here is that the way the turbochargers are packaged takes up less space than past systems. It looks like both turbos are contained in one unit that shares the same exhaust outlet, meaning the exhaust manifold could be kept simple and compact. In fact, the piping for compressed intake air could also be shared, reducing the amount of piping, which would further decrease the amount of materials and possible failure points. There are a number advantages of making this system smaller. The potential applications of the system are much greater, since it could fit in smaller cars with smaller engine bays. Making the system smaller also means that there won't be as much weight, which is important from both fuel economy and performance standpoints. Finally, the smaller setup likely uses fewer materials, which could make the system cheaper and thus easier to offer on a wider range of vehicles, or at least more profitable for Mazda.

Mazda struggles to meet demand on rising sales

For Mazda there's good and not-so-good news on the heels of strong US sales in 2012: demand is high - especially for the Mazda3, Mazda6 and CX-5 - but supply is low, TheDetroitBureau.com reports. That's partly because all Mazda production happens in Japan, since it ended its alliance with Ford and pulled out of a joint venture with the blue oval building cars in suburban Detroit last year.
In 2012, Mazda sales here jumped 26.4 percent, but 2013 sales through August have just been keeping pace with the overall US auto industry, increasing at a rate of 6.8 percent. Mazda North American Operations director of marketing and communications Jeremy Barnes says that sales have slowed because the company is facing challenges delivering products here.