2011 Mazda 6 I on 2040-cars

Auto blog

Five vehicles named Top Safety Pick+ including new Civic, MKZ

In an attempt to help push vehicle safety to a higher level, the Insurance Institute for Highway Safety created a stricter Top Safety Pick+ rating last year, which incorporates a brutal small overlap test and requires cars to get Good ratings in four out of the five categories (and no less than Acceptable in the fifth). Joining the list of the safest cars of 2013, the 2013 Volvo XC60, Lincoln MKZ, Honda Civic (sedan and coupe) and the 2014 Mazda6 have all received the coveted TSP+ rating.
The Mazda6 and Lincoln MKZ have both been completely redesigned, and both received Acceptable ratings in the small overlap test. The Honda Civic, coming off its emergency refresh for 2013, is the first small car to be subjected to the small overlap test, and IIHS says that one of the car's many upgrades includes a stiffer front structure allowing it to receive Good ratings in all categories. Similarly, the XC60 gets all Good ratings thanks to, according to IIHS, Volvo updating the airbag software allowing the side airbags to inflate during the small overlap test.
The 2014 Subaru Forester has not yet been subjected to the small overlap test, so it must make do with just a Top Safety Pick rating until the IIHS tests small utility vehicles, which is expected to happen later in the spring.

Confirmed: Mazda Miata gets more power, higher redline, telescoping wheel

Our friend over at Road & Track, Bozi Tatarevic, has a keen nose for stuff just like today's Miata news, and he spotted an article by the Japanese car magazine Car Watch that details Mazda's upcoming updates. Car Watch actually got to drive the car, too. There's a lot to go through, but the highlight has to be confirmation of what we told you earlier this year about a significant power bump: The Miata will indeed get an increase of 26 horsepower, from 155 to 181. But the power's not the whole story. Mazda has increased the redline from 6,800 RPM to 7,500. It's not clear at this point where torque and power peaks are in the rev range, or how these changes affect low-speed drivability, but more revs are almost always a good thing and aren't likely to detract from the roadster's fundamental goodness. Car Watch reports that lighter pistons and connecting rods are fitted to help reduce rotational mass in the 2.0-liter inline-four. Some valvetrain changes were needed to support the higher redline, mainly stiffer valvesprings to prevent valve float. Mazda also changed the shape of the valves and optimized the intake ports to breathe better at higher RPM. The inner diameter of the exhaust ports were increased to flow better through a new muffler better tuned to the engine's new operating range. This confirms and gives a little more detail to what we reported earlier based on a leaked document from Mazda Canada. Car Watch also confirms that the revised Miata will get a low-inertia dual-mass flywheel, which should help absorb some vibration, noise and harshness from the higher-revving engine without losing too much of the directness that a single-mass flywheel provides. Mazda usually gets stuff like this right, so while we won't know until we get a chance to drive it whether the DMF feels "right," we're not too worried about it. There's also a telescopic steering wheel, a first in any Miata, which has a range of about 1.1 inches. That doesn't sound like much, but it should help folks with longer legs reach the wheel without having to crank the seat forward. Interestingly, Car Watch reports that the telescoping wheel was opposed by some in the company seeking to save every fraction of an ounce of weight, and to get it through, the company apparently had to change some of the material in the upper steering column from steel to aluminum to satisfy the weight-conscious. Little details like these are fantastic.

Bauer Catfish is a Miata-based trackstar in the making [w/videos]

We're not trying to make a joke here. The creation you see above really is called the Bauer Catfish, and while the name is about as attractive as your average bottom feeder, the car itself is built on a sexy notion. Take the mechanical bits of one 1990-2005 Mazda MX-5 Miata, add in a tube chassis for as little weight as possible, complete with some custom body work and go forth. Bauer says the finished product weighs in at just 1,550 pounds, and the company will be happy to pull the stock four-cylinder to drop in a healthy General Motors LS V8.
The pre-production prototype shown above competed in last year's 25 Hours of Thunderhill, finished the race and earned a spot on the podium in the "anything goes for sports racers" ESR class. Very cool.
If you're looking for a dedicated track car, it may not get any better than this for the money. Expect to pay around $13,900 depending on options, plus the cost of your donor Miata. That's a good sight cheaper than a used Chevy Corvette Z06 and likely to be quite a bit more fun. After you're done watching it in action in the brief videos below, check it out over at Bauer Ltd.