Garage Kept 1 Owner Gran Turismo White Loaded Only 4k Miles on 2040-cars

Auto blog

Stellantis wants to trim 3,500 hourly U.S. jobs, UAW says

WASHINGTON — Chrysler-parent Stellantis NV wants to cut approximately 3,500 hourly U.S. jobs and is offering voluntary exit packages, according to a United Auto Workers union letter made public Tuesday. The automaker is looking to reduce its hourly workforce offering incentive packages that include $50,000 payments for workers hired before 2007, UAW Local 1264 said in a letter dated Monday posted on its Facebook page. Stellantis spokeswoman Jodi Tinson declined to comment. A person briefed on the matter said the figure might be lower than the figure cited in the UAW letter. In late February, Stellantis indefinitely halted operations at an assembly plant in Illinois, citing rising costs of electric vehicle production. The action impacted about 1,350 workers at the Belvidere, Illinois, plant that built the Jeep Cherokee SUV and resulted in indefinite layoffs. The automaker has warned it may not resume operations as it considers other options. The UAW letter said openings created by workers leaving would be filled by workers on indefinite layoff. Stellantis said in February that about 40,000 U.S. hourly workers were eligible for profit sharing. Last week, UAW President Shawn Fain said Stellantis' decision to idle the Illinois plant was "a flat-out violation" of the union's contract with the UAW and is unacceptable. The UAW will enter talks with the Detroit Three before labor contracts expire in mid-September. Earlier this month, General Motors said about 5,000 salaried workers accepted buyouts to leave the automaker. GM CEO Mary Barra said February job cuts of a few hundred jobs and the 5,000 buyouts "provided approximately $1 billion towards" a $2 billion cost cutting target. Ford Motor Co recently announced significant job cuts in Spain, Germany and other parts of Europe and in August said it would cut a total of 3,000 salaried and contract jobs, mostly in North America and India. Hirings/Firings/Layoffs UAW/Unions Chrysler Dodge Fiat Jeep Maserati RAM Stellantis

Maserati recalls 26k sedans for rear suspension failure

The Basics: Maserati is recalling all 26,464 examples of the 2014-16 Quattroporte and Ghibli sedans it manufactured between February 1, 2013, and September 18, 2015 and sold or leased to customers in the United States. The Problem: The bolt securing the tie-rod to the hub carrier assembly in the rear suspension may not have been properly tightened during manufacturing, which could cause the suspension to fail and the driver to lose control of the vehicle. Injuries/Deaths: The manufacturer reports that it is unaware of any accidents or injuries to have resulted from this issue. The investigation was prompted by reports of excessive noise. The fix: Dealers will check the bolts in question and replace the hub carrier assembly if necessary. If you own one: Look out for a letter from the manufacturer to arrange service at your local dealer. Related Video: RECALL Subject : Improperly Torqued Rear Tie Rod Bolt Report Receipt Date: MAY 02, 2016 NHTSA Campaign Number: 16V264000 Component(s): SUSPENSION Potential Number of Units Affected: 26,464 Manufacturer: Maserati North America, Inc. SUMMARY: Maserati North America, Inc. (Maserati) is recalling certain model year 2014-2016 Quattroporte and Ghibli vehicles manufactured February 1, 2013, to September 18, 2015. During the assembly process, the rear tie-rod to hub assembly attaching bolt may not have been properly tightened. CONSEQUENCE: An improperly tightened rear tie-rod to hub carrier assembly attaching bolt may allow the tie-rod to separate from the hub carrier, resulting in a loss of control, increasing the risk of a crash. REMEDY: Maserati will notify owners, and dealers will inspect the left and right rear tie-rod to hub carrier assembly attaching bolts to verify that they are properly tightened, replacing the rear tie-rod to hub carrier assembly as necessary, free of charge. The recall is expected to begin on July 1, 2016. Owners may contact Maserati customer service at 1-201-510-2369. Maserati's number for this recall is 303. NOTES: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov. Featured Gallery 2014 Maserati Quattroporte S Q4: First Drive View 31 Photos News Source: National Highway Traffic Safety AdministrationImage Credit: Copyright 2016 AOL Recalls Maserati Luxury Performance Sedan maserati ghibli

Maserati details the new, 630-hp V6 that will power its mid-engined MC20 coupe

Maserati is done leaning on former sister company Ferrari for technical support. It has unveiled the six-cylinder engine it designed and will build in-house to power the MC20 supercar that's scheduled to make its debut later in 2020. Ferrari's willingness to develop and/or build engines for Maserati shrank significantly when it split from former parent company Fiat-Chrysler Automobiles (FCA) in early 2016 and became independent. Insiders knew the division would be spun off, so they began designing Maserati's new engine (which is called Nettuno) in 2015 and accelerated the process in 2017. It's a 90-degree, 3.0-liter V6 with a dry sump and a twin-spark, pre-chamber ignition system rooted in racing. In this application, it's twin-turbocharged (the turbos are mounted on the outside of the engine rather than in the middle of it) and it's equipped with both direct and indirect fuel injection.  All told, the 485-pound Nettuno engine develops 630 horsepower at 7,500 rpm and 538 pound-feet of torque between 3,000 and 5,500 rpm. It continues revving to a redline of 8,000 rpm.  Matteo Valentini, Maserati's chief engineer, explained the Nettuno engine will ultimately power the company's entire range of vehicles, though he stopped short of naming the specific models that will use it after the MC20. He added the six-cylinder will "bring Maserati back into the world of racing," meaning its output will likely grow in the not-too-distant future. We'll learn more about the engine when the MC20 makes its debut September 9. What remains to be seen is whether Maserati will replace the V8 available in the Levante and the Quattroporte, or if it will surf the downsizing wave sweeping across the industry. Developed jointly with Ferrari in the early 2010s, that engine makes 590 horsepower when it's bolted in the Levante Trofeo's bay, meaning its output is eclipsed by the Nettuno V6's. Both engines are built around a 90-degree architecture, so the 3.0-liter V6 could turn into a 4.0-liter V8 if it's modular enough to gain a pair of cylinders — and if Maserati sees a market for another eight-cylinder. Featured Gallery Maserati Nettuno 3.0-liter V6 engine Maserati Coupe Performance