2001 Lincoln Ls Lse Sedan 4-door 3.0l on 2040-cars

Auto blog

Ford and Lincoln recall about 170,000 vehicles over defective rear-view camera

Ford and Lincoln have jointly issued a safety recall that includes nearly 170,000 vans and SUVs built between the 2018 and 2023 model years. The vehicles included in the campaign are equipped with a rear-view camera whose image can cut out while the driver is backing up. Assigned recall number 23V-598 by the National Highway Traffic Safety Administration (NHTSA), the campaign includes the following cars: 7,649 units of the 2020-2023 Aviator fitted with the standard rear-view camera and built from October 19, 2019, to August 17, 2023. 70,600 units of the 2018-2021 Navigator fitted with the 360-degree camera and built from March 16, 2017, to December 23, 2021. 66,740 units of the 2022-2023 Transit fitted with either camera system and built from February 26, 2021, to August 17, 2023. 24,468 units of the 2021 Bronco fitted with the 360-degree camera and built from September 23, 2020, to December 22, 2021. Ford explains that the defect is present in all of the 169,277 vehicles included in the campaign. While these are different cars equipped with different technology, they all suffer from the same problem. The company explains that "customers may intermittently experience either a rear camera blue image or a full blue or black image on the SYNC [infotainment system] screen when the vehicle is placed in reverse, or when the 360-degree view is selected and available." It adds that losing the camera's image while backing up increases the risk of the crash. The cause of the problem varies from model to model. Ford has narrowed it down to the camera hardware, the wiring retention, and the Image Processing Module - V (IPMB) software. It adds that "fretting corrosion causes tin oxide formation on the internal camera connector due to [a] thermally-induced micro-movement between the tin-plated contact surfaces," and that the rate of tin oxide accumulation depends on factors such as the temperature and the humidity. It has also traced some of these issues to a problem during the manufacturing process. Ford will begin notifying owners of affected vehicles by mail on October 2. When parts are available, owners will be asked to bring their van or SUV to an authorized dealer so that a technician can replace the rear-view camera. Transit models included in the campaign will also receive a software update. Owners who have already paid to fix the problem can claim a reimbursement until June 30, 2024. This isn't Ford's first rear-view camera-related recall.

2017 Lincoln Continental: Was this mic-drop moment just a big flop?

The Lincoln Continental may have been our fifth-place pick for Best In Show at this year's Detroit Auto Show, but it's probably the one we argued about the most. In fact, we're still talking about it. And we'll no doubt be discussing it long after we finally get to drive the new sedan later this year. We do this with lots of cars, all the time. The Continental is an especially important, high-profile car right now. It has the task of being a torch-holder for the struggling-to-run Lincoln brand, and that's a tough job these days. But did Lincoln do right by its Continental name? Did its Detroit showcar stop us in our tracks, or were we left feeling cold? In an effort to show you our full discussion, we're trying something different. About a week after the Detroit Auto Show press days concluded, Autoblog's Jonathon Ramsey sent an email around to some editors about the Continental to open a discussion. It got heated, and fast. And while we considered summarizing it, we decided to instead post the whole, largely unedited (adjusted for typos and swear words) chain. From: Jonathon Ramsey To: Autoblog Team Does anyone else think it's a problem that the new Continental looks 85 percent like the MKZ? And another 10 percent of it looks like a Jaguar and a Bentley? Because I think Lincoln screwed the pooch. The German Three plus Porsche can make cars that look alike – they've earned the right, even if I'd rather they didn't. The MKZ looks like a car for regional sales reps. Lincoln broke the glass in case of emergency, grabbed the Continental name, then put it on a car that looks a lot like that sales-rep car, but one for regional VPs. Do we really think this can work? Because I don't. From: Steven Ewing To: Autoblog Team Personally, I'm pretty disappointed in the final execution of Continental. I'm glad Lincoln isn't obsessed with chasing the Germans, but at this point, it's not even chasing Cadillac. I think that introducing the new front end and TTV6 engine on the MKZ before the Continental was a huge mistake. And while I have high hopes for the Conti from a comfort/driving standpoint, my gut instinct is that it's going to be more "better than the MKS" than "best American luxury sedan." Introducing the new front end and TTV6 engine on the MKZ before the Continental was a huge mistake.

Ford recalls 90,736 vehicles due to engine valve issue

Ford will recall 90,736 vehicles as engine intake valves in the vehicles may break while driving, the National Highway Traffic Safety Administration (NHTSA) said on Saturday. The recall impacts certain 2021-2022 Bronco, F-150, Edge, Explorer, Lincoln Nautilus, and Lincoln Aviator vehicles equipped with either a 2.7L or 3.0L Nano EcoBoost engine, the NHTSA said. According to documents posted by NHTSA and sourced from the automaker, "The engine intake valves may break while driving, which can result in engine failure and a loss of drive power." Following an investigation that started in January, 2022, Ford found 22 instances where "the engine intake valves fractured and fell into the combustion chamber of the engine causing catastrophic engine damage." The automaker's analysis continues: "Ford identified that the potential root cause of the failures was engine intake valve failure due to valves that exceeded the designed specification for hardness, were brittle, and more likely to fracture. Ford determined that this was due to the supplier’s grinding processes and the sensitivity of the intake valve material to grinding processes that were not within control specifications. The intake valve material was changed for vehicles produced after October 31, 2021." Fixing the problem will require replacement of the entire engine. "Dealers will inspect each vehicle to determine its cumulative number of engine cycles. For vehicles that do not meet the engine cycle threshold, dealers will accumulate high revolutions per minute (rpm) engine cycles per a service procedure. Engines will be replaced on vehicles that do not pass the engine cycle accumulation," Ford says.