1990 Lincoln Continental Base Sedan 4-door 3.8l Classic Very Good Condition on 2040-cars

Auto blog

Ford recalls 2020-21 Explorer and Lincoln Aviator, 2021 E-Series

Ford announced safety recalls for the 2020-2021 Explorer and Lincoln Aviator along with the 2021 E-Series early Monday. The recalls address entirely different issues.  In the case of the 2020-2021 Ford Explorer and Lincoln Aviator, that issue is motor mount hardware. Specifically, the fasteners that secure the passenger-side motor mount may back out. In Ford's words, this can result in a "loss of power," which is the entirely predictable result of an engine parting ways with the vehicle it powers.  As alarming as that may sound, owners should not have to worry about anything extreme, as the passenger side mount is only one of multiple, and Ford says it is not aware of any incidents that have occurred with vehicles in customer hands. Ford says it impacts only about 1400 examples of the Explorer and Aviator in the States (plus two in Mexico and 65 in Canada) that were built at Chicago Assembly Plant between July 28 and 30, 2020. Ford is in the process of alerting its owners to the recall, and those with affected models will have their mount hardware replaced by their local Ford dealerships free of charge.  The 2021 E-Series is being recalled for a potential heat management issue resulting from improperly aligned thermal insulation on the underside of its engine cover. In vehicles where this insulation was not properly installed so that it reaches all the way to the edges of the cover, the resulting heat bleed can cause high in-cabin surface temperatures, and direct contact them could result in burns.  This is the larger of the two recalls, as Ford says it covers nearly 33,000 examples sold in the United States and Canada. Fortunately, as with the above issue, Ford says it has not been made aware of any customer incidents. Ford says the remedy is a set of insulation patches for the exposed areas.  Related Video:

Lincoln announces its first EV will be built on Rivian platform

Confirming months of reports, Lincoln announced that its first fully electric vehicle will be based on the Rivian electric platform. That platform will underpin the Rivian R1T pickup truck and R1S SUV. Lincoln didn't specify whether this EV will be a car, truck or SUV, but all signs point to an SUV. The company highlighted its revamp of crossover and SUV models and how they've helped increase the brand's sales. Rivian's CEO R.J. Scaringe also said previously that it would build an SUV for Lincoln. In that same report, Scaringe noted that the Lincoln electric SUV would launch sometime in 2022, and it would be built at the factory in Illinois where it will also build the R1T and R1S. The R1T and R1S are expected to go into production at the end of 2020. Based on what we know about the Rivians, it could have a range from 230 to 400 miles and output as high as 800 horsepower from a quartet of motors. The production of the Lincoln electric SUV on the Rivian platform in the Rivian factory may also be a factor in Rivian lowering the prices of its vehicles. The base R1T was initially priced around $70,000 and the base R1S at around $72,000. But with the addition of the third Lincoln variant, now has more vehicles to recoup development costs. Related Video:    

Mustang parts under the new Lincoln Aviator mean good things for Ford

NEW YORK — As we mentioned last night, underneath the new Lincoln Aviator "concept" there appears to be an independent rear suspension lifted right from the Ford Mustang parts bin. And while it's pretty cool on its face that Mustang rear-drive platform bits are being reused in the broader Ford universe, what this means for the next Explorer could be really cool. A quick caveat: The Aviator here in New York is very close to the production version, but it's not technically a production car. It looks hand-built, with temporary exhaust and some show-car touches. The suspension underneath looks exactly like a Mustang's, but the actual production Aviator will almost certainly use beefier components with the same basic design and geometry, since the Aviator will be much heavier than the smaller Mustang. That being said, we're fairly confident that even at this early stage, the Mustang-derived suspension seen in New York is a preview of what'll be under the production Aviator. Furthermore, Ford won't say it, but based on what we're seeing on Aviator, it's a safe bet that Ford will utilize the Aviator platform for the next Explorer. That would enable the economies of scale necessary to produce a brand new rear-drive-based SUV platform in the first place. It also means that the Explorer should be available without AWD — and given the stable of powerful EcoBoost engines, and the competent 10-speed automatic in the parts bin, a rear-drive Explorer has a shot at being a decent driver. Aviator wouldn't go rear-drive-based if driving dynamics weren't important; Explorer should inherit these priorities. More evidence: The Explorer spy shots we saw back in February sure share the Aviator's general proportions. Even back then, before Aviator was revealed, we were hypothesizing that an EcoBoost 3.5-liter-powered version could boast as much as 400 horsepower, if the Expedition's tune were adopted. Suddenly, the Explorer seems very interesting. So, an EcoBoost, rear-drive Explorer sure sounds like something Ford Performance would be interested in, right? We knew an Explorer ST is coming, but with 365-400 horsepower potential and a chassis designed with dynamics in mind, it doesn't seem like as much of a stretch as the Edge ST. And a performance-oriented AWD system is a possibility, too. That's an area where Ford has been gathering experience at a rapid pace. What do we not expect from a new Explorer? A V8.