2006 Lexus Lx 470 Sport Utility 4-door 4.7l on 2040-cars

Auto blog

Lexus IS 200t gets a 245 hp turbo four-cylinder, comes here in 2016

The exact timing isn't clear, but now that we have the good news we're ok with a little wait: in Europe Lexus just replaced the 2.5-liter V6 in the IS 250 with its 2.0-liter, turbocharged four-cylinder, and we'll get it. The 2.0-liter currently serves in the NX 200t, putting out 235 horsepower and 258 pound-feet. Car and Driver says it will be tuned differently for what will become the IS 200t, with an output of 241 hp and 258 lb-ft. Those numbers whoop the 2.5-liter V6 by 37 hp and 73 lb-ft, and they're just 65 hp and 19 lb-ft under the 3.5-liter V6 in the much more popular IS 350. Improvements continue in the transmission, the IS 200t getting eight cogs - there won't be a manual option - instead of the six-speed 'box mated to the 2.5-liter now. That means buyers can expect a car that's not only more powerful and more responsive, addressing the two fundamental omissions in the IS 250's list of talents, it will also get better fuel economy than the 21 city, 30 highway miles per gallon the old six-cylinder musters. What they can't expect according to CD is all-wheel drive. We're told the engine swap should come "in the early part of the 2016 model year," and it will only come with rear-wheel drive. C/D says that Lexus will bring a third engine to the range that will power an all-wheel entry, which seems a tad complex to us, but if true it wouldn't be the first time the words "Lexus" and "complex" have cozied up together. A press release from Lexus Europe is below. LEXUS TO LAUNCH IS 200t WITH INNOVATIVE 2.0l TURBO PETROL ENGINE • New turbo engine offers superior smoothness and responsiveness, with no turbo-lag and high fuel efficiency • Engine mated to 8-speed Sport Direct Shift transmission • IS 200t on sale in Europe as from September 2015 Brussels, Belgium, 26 Jun 2015 - Lexus is expanding the range of vehicle equipped with its new 2.0-litre turbo engine. Following the launch of NX 200t in early 2015 and the announced arrival of RX 200t by the end of the year, IS is the third Lexus model to be fitted with this new engine. Powered by a new 2.0-litre petrol turbo engine – with innovative D-4ST fuel injection technology for both fuel economy and instantaneous torque – the Lexus IS 200t sports sedan delivers 245 DIN hp (180kW) with a maximum torque of 350 Nm. Capable of rapid acceleration up to a top speed of 230 km/h, its 8-speed Sport Direct Shift transmission was developed for the high-performance RC F.

Toyota's 'green bond' an industry first, quickly rises to $1.75 billion

Toyota is greasing the skids for more green car purchases with the announcement of a $1.75-billion bond designed to finance the purchase of high-efficiency Toyota and Lexus models. The Asset-Backed Green Bond is a first for the automotive industry and is making a lot of money available to buy or lease the following vehicles: any of the four Prius variants, Camry Hybrid, Avalon Hybrid, RAV4 EV, Lexus CT 200h and Lexus ES 300h. Originally, the bond was set at $1.25 billion, but Justin Leach, manager of public relations for Toyota Financial Services (TFS), told AutoblogGreen that demand was high and it was quickly oversubscribed. TFS has been looking at more ways to diversify its portfolio after a Diversity & Inclusion Bond that was announced in early 2013 and, with the new Green Bond, TFS is offering something for the "number of investors out there who are looking for investment opportunities in green." The way the money from the bond is used, basically, is that TFS takes the $1.75 billion and uses it to finance the purchase or lease of the nine vehicles listed above. As of right now, all the eligible vehicles are plug-in or hybrids, but the rules simply say that the cars in the program have to meet certain "powertrain, fuel efficiency and emissions" criteria. That means: Minimum EPA estimated MPG (or MPG equivalent for alternative fuel vehicles) of 35 city / 35 highway California Low-Emission Vehicle II (LEV II) certification of super ultra-low emission vehicles (SULEVs) or higher, which would include partial zero emissions vehicles (PZEVs) and zero emissions vehicles (ZEVs). TFS raises plenty of billions in other ways for the rest of the lineup, and got into asset backed securities in 2010, Leach said. Given the success of this first Green Bond, Leach said he expects TFS to keep this idea in its arsenal. "This one was so well received, I would be surprised if we didn't see it again," he said. "If anyone was going to do it, it should be Toyota, right?" Toyota Financial Services (TFS) Issues Auto Industry's First-Ever Asset-Backed Green Bond Bond Proceeds to Fund Consumer Loans and Leases for Toyota's Leading Portfolio of Green Vehicles TORRANCE, Calif., (March 24, 2014) – Toyota Financial Services (TFS) issued the auto industry's first-ever Asset-Backed Green Bond in the amount of $1.75 billion.

This 'tattooed' Lexus UX is the first of its kind, and we love it

Lexus commissioned the first “tattooed” car ever, and itÂ’s chosen the UX as the tattoo artistÂ’s canvas. Art cars and special projects catch our eye sometimes, but this particular project is one of the most intriguing works of art on a car weÂ’ve seen in a long time. The process that tattoo artist Claudia de Sabe went through to translate her vision onto the UX is what weÂ’re really interested in here. Since the UX is obviously a metal car, de Sabe needed to use a Dremel tool to drill away the blank white surface paint, exposing the bare metal underneath. Those painstakingly drilled lines were used as the pattern for the art taking shape. She had to be unerringly precise in her work. After all, thereÂ’s no magic eraser for drilling into a carÂ’s metal body panels. Spending that much time free-drawing with a Dremel is intensive and demanding work, too. Comfortable positions are hard to come by, and a slip could be disastrous. After the pattern was drilled in, de Sabe switched to car paint and brushes. The koi fish and waves were painted on by hand, and then finally, de Sabe used gold leaf to create highlights in the paint and give it a stronger 3D effect. To protect the artwork, a layer of lacquer was applied, making it possible to drive this UX on the road. From the planning stages to the finished product, Lexus says it took six months. The in-studio work from de Sabe (and her tattoo artist husband who assisted her work) took place over five eight-hour days. “My main inspiration for the design of the car was just all the beautiful artwork that IÂ’ve seen in Japan, in the temples, ukiyo-e prints, all of that artistic background,” de Sabe says. Tattooing a car isnÂ’t cheap either, as Lexus estimates this bespoke work would cost “upwards of GBP120,000” (about $140,000). Lexus made a video featuring de Sabe explaining her work and showing the “tattooing” in progress. ItÂ’s worth a quick watch, so check it out below. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.