4dr Sdn Rwd Low Miles Navugation Moon Roof One Owner 4.6l V8 Starfire Pearl on 2040-cars

Auto blog

Toyota will bring Lexus-based Platform 3.0 autonomous vehicle to CES

The Toyota Research Institute says it will bring its next-generation Platform 3.0 automated driving vehicle to CES next week, an autonomous test car that is notable for incorporating the sensors and cameras into the body, rather than as ungainly attachments, and with the spinning LIDAR rooftop sensor replaced by a more sleek panel of sensors. Platform 3.0 is built on a Lexus LS600hL. Toyota Research Institute says it enlisted CALTY Design Research in Ann Arbor, Mich. and engineers at Toyota's nearby North America R&D center to conceal the equipment. As a result, Platform 3.0 gets a new rooftop weather and temperature proof panel, which it says was inspired by off-road motorcycle helmets, integrated into the available space in the sunroof compartment to minimize height. It's also embellished with chrome trim along the side, where it meets the roofline, and the rear swoops down to integrate with the LS's contour lines. The team also managed to consolidate computational electronics and wiring into a small box in the trunk. Toyota says the Platform 3.0 is one of the most perceptive autonomous test vehicles on the road today, with a design makes the test vehicle easy to build at scale. It gets a Luminar LIDAR system boasting a 200-meter, 360-degree range (the previous version only tracked the forward direction), enabled by four high-res LIDAR scanning heads that help it better see dark objects. Shorter-range LIDAR sensors feature low on all four sides of the vehicle, one on each front quarter panel and on the front and rear bumpers, to detect low-level and smaller objects, like children or road debris. Production begins this spring at the Toyota Motor North America R&D headquarters at low volumes to allow for flexibility, given the rapid rate of development of Toyota's autonomous test platforms. Some will be assembled using Toyota's Guardian dual-cockpit control layout to allow for transferring control between a human test driver and the automated system while keeping the driver as a backup, while the single-cockpit, fully autonomous Chauffeur mode will be shown at CES starting Jan. 9.Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Least favorite vehicles of 2017

2019 Lexus NX F Sport gets the Black Line treatment

Lexus is debuting a limited-production NX F Sport Black Line edition at the 2019 Chicago Auto Show. Set to be sold for the 2019 model year only, the Black Line is essentially an appearance package with some added equipment as well — Lexus previously made a Black Line version of the RC coupe with similar results. The package takes a normal NX 300 F Sport and jazzes it up a bit. The NX in this spec is equipped with a 2.0-liter turbocharged four-cylinder making 235 horsepower and 258 pound-feet of torque. Forged 19-inch chrome wheels and a faux carbon bodyside graphic are the main exterior changes. Only three colors will be available for the Black Line, including black, silver and the white you see here. The interior gets colors to complement the exterior, with two-tone white and black seats. A black headliner is standard, as are unique Black Line floor mats, cargo mats and key fob gloves. Extra equipment comes in the form of a new Mark Levinson 14-speaker, 835-watt audio system. This audio setup isn't available on any other version of the NX crossover. Beyond that, the Black Line is a fully-loaded NX with nearly all of the available option boxes checked. Notable upgrades include navigation, blind-spot monitoring, heated/cooled seats, an auto-dimming mirror and moonroof. Lexus is limiting production to 1,000 units for this special edition, which will be arriving in dealerships in February — as in, right about now. It's available in either front-wheel or all-wheel drive. The front-drive version goes for $49,600, while all-wheel drive will run you $51,000 including destination charges. Related video:

The hoverboard of your dreams is finally here, thanks to Lexus

Finally. Finally! Anyone who grew up in the 1980s has been waiting for this moment for a long, long time. Since 1989, to be exact, which is when Back to the Future Part II hovered its way into theaters showing Marty-of-the-past riding a newfangled board-without-wheels in a fabricated future. After several teases, Lexus has finally unleashed real, actual footage of its hoverboard in action. As you'll see in the video, the learning curve is steep, even for a professional skateboarder like Ross McGouran. "I've spent 20 years skateboarding, but without friction it feels like I've had to learn a whole new skill, particularly in the stance and balance in order to ride the hoverboard. It's a whole new experience," says the hoverboard test rider. Before we all get too carried away, there are caveats to this real-world hoverboard. First, the technology doesn't work everywhere. According to Lexus, 200 meters of magnetic track was built in Dresden, Germany, and shipped to a specially built "hoverpark" in Barcelona, Spain. Unlike the fictional hoverboard from BTTF, though, Lexus' creation does indeed work on water... assuming there's a properly magnetic surface below the surface. We're sure you've got questions – cryostats, liquid hydrogen and magnets, are the likely answers – but first, you really should watch the video. Then, feel free to check out the full press release down below, but before you get too excited, know that Lexus has said it does not intend to sell a production version of its hoverboard. Related Video: Lexus Hoverboard Ride Revealed New Film for the Latest Amazing in Motion Campaign Shows Final Testing in Barcelona August 04, 2015 TOKYO, August 05, 2015 -- Following the unveiling of the Lexus Hoverboard in June, the luxury automotive company is completing a full and final reveal of the project concluding a successful testing phase which took place in Cubelles, Barcelona. Mark Templin, Executive Vice President at Lexus International said: "Embarking on this project, we set out to push the boundaries of technology, design and innovation to make the impossible possible. With this project we call 'SLIDE', we collaborated with partners who share our passion for creating enjoyment out of motion. Even through combining our technology and expertise, we discovered making a hoverboard isn't an easy process.