Rare 5 Speed Manual Silver Over Black Leather/suede Sunroof Clean Title on 2040-cars

Auto blog

Lexus builds final LFA supercar

Lexus has officially built the very last LFA. The 500th Lexus supercar rolled from the company's Motomachi facility on December 14th wearing all of the goodies of the Nürburgring package and white paint. Toyota's Lexus division started production on the car exactly two years ago on December 15, 2010 and built just one unit per working day. A total of 170 workers were hand-picked to handle parts manufacturing, assembly and painting for the LFA project. While Lexus has made it clear it will produce no more LFA models, lessons gleaned from the vehicle's construction may translate into other future products.
Specifically, Toyota says it may employ its carbon fiber reinforced plastic experience moving forward. As you may recall, the LFA made extensive use of CFRP and carbon fiber, and Lexus even created a special rotary loom to stitch together the supercar's A-pillars. Take a look at the brief press release on the last LFA below.

2014 Lexus IS350 F-Sport

Is A New Kind Of Lexus Hiding Under That Radical Skin?
When the now-outgoing Lexus IS generation was launched back in 2006, the company would not have been wise to bring the compact luxury sedan to be driven by journalists to a track like Driveway Austin Motorsports. Taking along a BMW 335i for comparison loops would have proved an ill choice as well.
Our own Jonathon Ramsey found the current-generation Lexus IS250 to be fairly nimble over a tightly wound autocross course, when he drove it back-to-back with the prototype version of this 2014 IS a few months ago. Our track for testing the fully realized version of the IS350 F-Sport meanwhile - again with the 2013 version along for competitive driving - was on a circuit designed to string together recreations of some of the best tracks in the world. Laguna Seca, bits of the Nürburgring and sections inspired by Imola and Ferrari's Fiorano test track all make for a far more enticing road course than you'd expect to find plunked down in a nondescript area a few miles east of downtown Austin. Critically, this environment highlighted what strides Lexus has made in the sport sedan race with its new IS.

Why is there a huge bulge in 2021 Lexus IS 300 AWD's driver footwell? We explain

After an initial turn a few weeks ago for the 2021 Lexus IS first drive review, the revised luxury sedan has returned to the Autoblog garage for a second look. This middle-of-the-road IS 300 AWD pairs a 260-horsepower V6 with a six-speed automatic transmission and four driven wheels, and frankly it's the least interesting way to spec out the redesigned sedan. While there are cars in this segment designed to get a performance boost from their all-wheel-drive systems even in dry conditions, the IS isn't one of them. Adding insult to injury, you get stuck with a cramped driver-side footwell care of the engineering shenanigans that went into making this system possible.  While we've mentioned this particular compromise before, we rarely touch on the reasons why it exists in the first place. The fundamentals are fairly obvious; the standard IS utilizes a longitudinal, rear-wheel-drive powertrain. As is typical with this configuration, the transmission sits in a tunnel beneath the center console. This arrangement works just fine, provided you don't need to power the front wheels.  To do so in a traditional car like the IS requires a literal end-around maneuver involving the engine and transmission, which we've diagrammed for you below care of MSPaint. This is a bit simplified for the sake of this write-up, and it should be noted that this is not the only way to implement AWD in an inherently RWD platform, but it illustrates how the power for the front axle (red) and rear axle (blue) flows from the transmission to the drive wheels. To get juice flowing to the front axle, Lexus had to add a parallel output shaft, exiting the transmission from the front with enough clearance for the bell housing and engine, which sits between the transmission and the front differential. This requires quite a bit of lateral reach, meaning the housing has to extend much farther out than usual to accommodate it (yellow arrow). As a result, the all-wheel-drive transmission looks a lot like a sci-fi gun with a chunky drum magazine hanging off the side of it. The hump (above right) in the footwell is there to clear this protrusion. This basic configuration isn't unique to Lexus. In fact, if you look at a BMW xDrive cutaway, it's similar. So, why no "hump" in other cars? There are multiple factors, but to boil it down to what is most relevant, it's a combination of the resulting shape of the Lexus transmission housing and the size of the IS chassis.