Lexus Is 350 Perfect Conditon Loaded, Garage Kept on 2040-cars

Auto blog

Lexus Bladescan is another new headlight safety breakthrough U.S. won't get

Lexus is back at it with innovative lighting technology. The BladeScan headlights available in Europe on the 2020 RX utilize a new mechanism for throwing light further down the road, aiming that light more precisely, and doing so without blinding other road users. Lights from other OEMs with the same capabilities have increased the number of LEDs inside the housing for finer control. The BladeScan module inside the Lexus lights holds the number of LEDs down to 10 on each side of the RX, which Lexus says is a more cost-effective solution. In fact, BladeScan uses fewer LEDs than Lexus' most recent adaptive high-beam system, which has 24 LEDs on each side. The LEDs in the new module are arranged in two rows, eight on top, two on bottom. The diodes are fed information about objects ahead, and adjust their intensity to dim light aimed at an oncoming car, or illuminate a pedestrian by the roadside. However, the LEDs don't shine their light down the road, they shine their strobing light onto two blade-shaped mirrors — hence the name BladeScan — that rotate at high speed. The light reflects off the mirrored blades and into a lens, which orients the beam down the road. Not only is the reflected light easier to handle for oncoming drivers, the system has aim accurate to 0.7 degrees. Lexus' current adaptives are accurate to 1.7 degrees, making BladeScan a 143-percent improvement. That means the new feature can throw even more light into areas that are hard to reach with current lights — Lexus says pedestrian recognition at night has increased from 105 feet to 184 feet. Buyers of the 2020 RX will be able to take advantage when the new crossover goes on sale in Europe later this year. Naturally, U.S. Federal Motor Vehicle Safety Standard No. 108 means we won't get BladeScan — that goes for you, too, Canada. The now-52-year-old U.S. law mandates a single low beam and a single high beam setting, with no intermediate settings and no activation of high and low beams simultaneously. Toyota, Audi and BMW have been trying for six years to get FMVSS 108 changed to permit new and potentially lifesaving headlight technologies. The automaker wrote in a statement to Carscoops, "Last December, Lexus submitted a petition to NHTSA to allow ADB in the United States. Currently, we await the Agency's decision and hope to see an amendment in FMVSS 108."

The hoverboard of your dreams is finally here, thanks to Lexus

Finally. Finally! Anyone who grew up in the 1980s has been waiting for this moment for a long, long time. Since 1989, to be exact, which is when Back to the Future Part II hovered its way into theaters showing Marty-of-the-past riding a newfangled board-without-wheels in a fabricated future. After several teases, Lexus has finally unleashed real, actual footage of its hoverboard in action. As you'll see in the video, the learning curve is steep, even for a professional skateboarder like Ross McGouran. "I've spent 20 years skateboarding, but without friction it feels like I've had to learn a whole new skill, particularly in the stance and balance in order to ride the hoverboard. It's a whole new experience," says the hoverboard test rider. Before we all get too carried away, there are caveats to this real-world hoverboard. First, the technology doesn't work everywhere. According to Lexus, 200 meters of magnetic track was built in Dresden, Germany, and shipped to a specially built "hoverpark" in Barcelona, Spain. Unlike the fictional hoverboard from BTTF, though, Lexus' creation does indeed work on water... assuming there's a properly magnetic surface below the surface. We're sure you've got questions – cryostats, liquid hydrogen and magnets, are the likely answers – but first, you really should watch the video. Then, feel free to check out the full press release down below, but before you get too excited, know that Lexus has said it does not intend to sell a production version of its hoverboard. Related Video: Lexus Hoverboard Ride Revealed New Film for the Latest Amazing in Motion Campaign Shows Final Testing in Barcelona August 04, 2015 TOKYO, August 05, 2015 -- Following the unveiling of the Lexus Hoverboard in June, the luxury automotive company is completing a full and final reveal of the project concluding a successful testing phase which took place in Cubelles, Barcelona. Mark Templin, Executive Vice President at Lexus International said: "Embarking on this project, we set out to push the boundaries of technology, design and innovation to make the impossible possible. With this project we call 'SLIDE', we collaborated with partners who share our passion for creating enjoyment out of motion. Even through combining our technology and expertise, we discovered making a hoverboard isn't an easy process.

Lexus LF-1 Limitless looks like a curvy crossover concept

Lexus released a teaser for a new concept that will make its debut at the 2018 Detroit Auto Show, and it has quite the name. The company calls it the LF-1 Limitless, a name that wouldn't sound out of place on a battleship. According to Lexus, the name was chosen because this concept "is a flagship crossover that redefines the boundaries of luxury." Frankly, the boundaries that make up the high-dollar crossover segment are definitely well-tread by now. What we can tell is that the concept's heavily raked D-pillar suggests it will have a coupe-inspired look similar to the BMW X6 and Mercedes-Benz GLC Coupe. The bodywork features many curvy lines and exaggerated wheel arches. It will be interesting if this LF-1 has flagship size to go with its flagship description, which would put it in competition with the upcoming Audi Q8. This concept is well-worth keeping an eye on, since Lexus has a history of previewing future production models with the LF moniker. Examples include 2009's LF-Ch that became the CT 200h, 2012's LF-LC coupe that became the LC 500, 2013's LF-NX that became the Lexus NX crossover, and 2015's LF-FC that became the new LS sedan. Not everything makes it to production, such as the LF-SA mini car, and the LF-C2 that suggested an RC convertible. But there's a strong enough history of production cars coming from LF concepts that this LF-1 could be the preview of a new production model. Related Video: