2013 Lexus Gs 350 Base on 2040-cars

Auto blog

Lexus Bladescan is another new headlight safety breakthrough U.S. won't get

Lexus is back at it with innovative lighting technology. The BladeScan headlights available in Europe on the 2020 RX utilize a new mechanism for throwing light further down the road, aiming that light more precisely, and doing so without blinding other road users. Lights from other OEMs with the same capabilities have increased the number of LEDs inside the housing for finer control. The BladeScan module inside the Lexus lights holds the number of LEDs down to 10 on each side of the RX, which Lexus says is a more cost-effective solution. In fact, BladeScan uses fewer LEDs than Lexus' most recent adaptive high-beam system, which has 24 LEDs on each side. The LEDs in the new module are arranged in two rows, eight on top, two on bottom. The diodes are fed information about objects ahead, and adjust their intensity to dim light aimed at an oncoming car, or illuminate a pedestrian by the roadside. However, the LEDs don't shine their light down the road, they shine their strobing light onto two blade-shaped mirrors — hence the name BladeScan — that rotate at high speed. The light reflects off the mirrored blades and into a lens, which orients the beam down the road. Not only is the reflected light easier to handle for oncoming drivers, the system has aim accurate to 0.7 degrees. Lexus' current adaptives are accurate to 1.7 degrees, making BladeScan a 143-percent improvement. That means the new feature can throw even more light into areas that are hard to reach with current lights — Lexus says pedestrian recognition at night has increased from 105 feet to 184 feet. Buyers of the 2020 RX will be able to take advantage when the new crossover goes on sale in Europe later this year. Naturally, U.S. Federal Motor Vehicle Safety Standard No. 108 means we won't get BladeScan — that goes for you, too, Canada. The now-52-year-old U.S. law mandates a single low beam and a single high beam setting, with no intermediate settings and no activation of high and low beams simultaneously. Toyota, Audi and BMW have been trying for six years to get FMVSS 108 changed to permit new and potentially lifesaving headlight technologies. The automaker wrote in a statement to Carscoops, "Last December, Lexus submitted a petition to NHTSA to allow ADB in the United States. Currently, we await the Agency's decision and hope to see an amendment in FMVSS 108."

Toyota to enter modern turbo four-cylinder era with Lexus crossover

Toyota has sat quietly on the sidelines as many of its competitors have armed themselves in recent years with lower-displacement turbocharged four-cylinder engines in an effort to gain better fuel efficiency numbers and flatter power curves. It's a strategy largely shared by fellow countryman Honda, who turned away from offering forced-induction four-cylinder models in North America after its first-generation Acura RDX failed to find buyers. Toyota itself has no lack of experience with turbo fours, having built some humdingers for cars like the MR2 and Celica All-Trac back in the 80s and 90s. It's also offered factory-warranted turbos through its TRD performance parts division more recently.
Now, Automotive News is reporting that the world's largest automaker is finally poised to rejoin the turbo-four production-car fray in North America, but it won't be a sports car that delivers the first force-fed punch, it will be a new small crossover model for Lexus. We first showed you spy shots of the NX last week in mule form, and Automotive News says the small softroader will carry a 2.0-liter turbo four in its engine bay when it rolls on to world markets in 2014 or early 2015. That model, the NX 200t, will be joined by the NX 300h, a hybrid variant. It isn't immediately clear when US buyers will see the turbo model, however, it's possible that the hybrid could bow first - the story quotes an anonymous company source suggesting that Americans might not see the engine offering until sometime in 2015.
AN further posits that the new 2.0-liter will likely supplant the company's 2.5-liter V6 in the IS sedan and the same-displacement four-cylinder in the Toyota RAV4, but does not indicate where the new engine will be built.

Lexus NX rolls on wheels made of ice

To create this rolling ice sculpture, Lexus teamed up with London-based Hamilton Ice Sculptors, which fitted the compact luxury crossover with wheels and tires crafted from ice. The sub-zero craftsmen then deep-froze the entire vehicle, stored it at -22 degrees Fahrenheit, and drove it around London – pleasantly surprised to find that it started on the first try. As far as publicity stunts go, the finished product looks even cooler than the cardboard IS that Lexus had crafted a few months ago or the biometric glow-in-the-dark RC F from this past summer. The project took three months of research, design, and testing to carry out. The wheels replicate the alloys on the NX with millimetric precision, right down to the tread pattern, and each one took a team of four craftsmen 36 hours of work to complete. Of course, blocks of ice would have a hard time supporting the weight of the vehicle – especially while in motion – so the frozen wheels were reinforced with clear acrylic discs. And to make it all glow, they were also fitted with in-wheel LED lighting. This isn't the first time we've seen ice sculptors apply their skills to automobiles, following the frozen Canadian Tire pickup, Toyota Land Cruiser, Nissan Cube, and Saab Aero-X we've seen in recently years. But this one is at least as cool, in one sense or another. Scope out the results in the video above, and the process that went into their creation in the making-of video below. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. LEXUS NX RIDES ON THE WORLD'S COOLEST WHEELS – CRAFTED IN SOLID ICE The concept of driving on ice has taken on a whole new meaning for Lexus, which has crafted the world's first set of working wheels and tyres made from frozen water. Brussels, Belgium - True to its mission of "creating amazing" and inspired by the craftsmanship that goes into every vehicle it makes, Lexus commissioned a team of ice sculpture specialists to explore how ice could be used in place of conventional alloy metal and rubber. After three months' research, design and testing, the finished wheels were fitted to a Lexus NX for the ultimate ice drive. The car itself was deep-frozen, stored for five days at -30°C (it started first time) before being driven off down a London road. The addition of in-wheel LED lighting added an extra dramatic dimension to the cutting-edge contemporary styling of the NX.