Navigation Mark Levinson Xtra Nice!!! on 2040-cars

Auto blog

The hoverboard of your dreams is finally here, thanks to Lexus

Finally. Finally! Anyone who grew up in the 1980s has been waiting for this moment for a long, long time. Since 1989, to be exact, which is when Back to the Future Part II hovered its way into theaters showing Marty-of-the-past riding a newfangled board-without-wheels in a fabricated future. After several teases, Lexus has finally unleashed real, actual footage of its hoverboard in action. As you'll see in the video, the learning curve is steep, even for a professional skateboarder like Ross McGouran. "I've spent 20 years skateboarding, but without friction it feels like I've had to learn a whole new skill, particularly in the stance and balance in order to ride the hoverboard. It's a whole new experience," says the hoverboard test rider. Before we all get too carried away, there are caveats to this real-world hoverboard. First, the technology doesn't work everywhere. According to Lexus, 200 meters of magnetic track was built in Dresden, Germany, and shipped to a specially built "hoverpark" in Barcelona, Spain. Unlike the fictional hoverboard from BTTF, though, Lexus' creation does indeed work on water... assuming there's a properly magnetic surface below the surface. We're sure you've got questions – cryostats, liquid hydrogen and magnets, are the likely answers – but first, you really should watch the video. Then, feel free to check out the full press release down below, but before you get too excited, know that Lexus has said it does not intend to sell a production version of its hoverboard. Related Video: Lexus Hoverboard Ride Revealed New Film for the Latest Amazing in Motion Campaign Shows Final Testing in Barcelona August 04, 2015 TOKYO, August 05, 2015 -- Following the unveiling of the Lexus Hoverboard in June, the luxury automotive company is completing a full and final reveal of the project concluding a successful testing phase which took place in Cubelles, Barcelona. Mark Templin, Executive Vice President at Lexus International said: "Embarking on this project, we set out to push the boundaries of technology, design and innovation to make the impossible possible. With this project we call 'SLIDE', we collaborated with partners who share our passion for creating enjoyment out of motion. Even through combining our technology and expertise, we discovered making a hoverboard isn't an easy process.

Lexus recalling 3,000 NX 200t CUVs for faulty brake system part

Lexus is recalling about 3,000 examples of the 2015 NX 200t in the US because of possible damage to the ABS actuator during assembly. On vehicles with the faulty part, the anti-lock brakes, traction control and stability control might not function properly. If the ABS is activated while driving, it could cause "a loss of vehicle stability," according to the company. No crashes, injuries, or fatalities have been reported. According to company spokesperson Cindy Knight to Autoblog, affected owners will receive notification by mail of this problem in early July. Dealers will inspect the actuator on the NX200t and will replace it, if necessary. Related Video: LEXUS RECALLS CERTAIN MODEL YEAR 2015 NX VEHICLES TORRANCE, Calif., May 27, 2015 – Toyota Motor Sales, U.S.A., Inc. today announced that it is conducting a safety recall of approximately 3,000 model year 2015 Lexus NX 200t vehicles. The involved vehicles are equipped with an Anti-Lock Braking system (ABS), Traction Control System (TRAC), and Vehicle Stability Control System (VSC) which are controlled by the ABS actuator. There is a possibility that a component inside the actuator could be damaged during assembly and later not operate properly. Under some driving conditions, if the ABS is activated, this could cause a loss of vehicle stability, which can increase the risk of a crash. To date, Toyota is not aware of any crashes, injuries or fatalities caused by this condition. All known owners of the involved Lexus vehicles will be notified by first class mail. Lexus dealers will inspect the ABS actuator and if necessary replace it with a new one. Information about automotive recalls, including but not limited to the list of involved vehicles, is subject to change over time. For the most up-do-date recall information, customers should contact Toyota Customer Service at 1-800-331-4331, or Lexus Customer Service at 1-800-255-3987. Customers can also access current information on open safety recalls for their vehicles by visiting www.toyota.com/recall or http://www.safercar.gov/ and entering their Vehicle Identification Number (VIN). ###

Toyota will race C-HR CUV in 2016 Nurburgring 24 Hours

There won't just be traditional racecars competing in the 2016 Nurburgring 24 Hours; Toyota Gazoo Racing will take the bizarre route of prepping the C-HR crossover for the grueling event. The squad will enter more conventional machines, too, including a Lexus RC and RC F for the race that will run from May 26-29. Details about the C-HR Racing are scant at the moment. "We decided to take on the new challenge of creating ever-better cars using a crossover rather than a pure sports car," the company's announcement said. It makes no mention of the vehicle's specs, but the included photo show the CUV with a more aggressive front fascia, vents along the hood, and a big wing at the rear. The driver lineup includes Masahiko Kageyama, Kumi Sato, and another person to be announced later. Toyota will reportedly introduce the production version of the C-HR at the Geneva Motor Show, and the final one will allegedly carry over the current rakish shape and hybrid powertrain. The company also showed it with Scion badging at the 2015 LA Auto Show to suggest a likely arrival in the US. This year will mark a decade of Gazoo Racing's competition in the 24 Hours of the 'Ring. The squad notably raced the LFA there for several years, but it showed a willingness to bring weirder vehicles too like a Lexus CT 200h in 2011. Nothing has been quite as odd as racing a crossover there, though. Toyota GAZOO Racing Celebrates Decade of Participation in the 24 Hours of Nurburgring with Triple Entry for 2016 Race Toyota City, Japan, January 15, 2016-Toyota GAZOO Racing announces the entry of three vehicles-a Toyota C-HR Racing*, a Lexus RC, and a Lexus RC F-in the 44th 24 Hours of Nurburgring endurance race to be held in Germany from May 26 to 29, 2016. The 24 Hours of Nurburgring plays an important role in Toyota's motorsports activities for building ever-better human resources and vehicles under intense racing conditions. Beginning in 2007, the 2016 event marks the 10th year of Toyota's participation in the race under the banner of GAZOO racing. When asked to look back over the last ten years, team representative Akio Toyoda said, "I remember GAZOO Racing first taking on the challenge of the Nurburgring in 2007 in an Altezza like it was yesterday. There are so many memories running through my mind–the interaction with the roads of the Nurburgring, whose characteristics seem to change with each shift in the weather, the meeting and parting with new and valuable friends.