2002 Lexus Sc430 on 2040-cars

Auto blog

Lexus planning a hydrogen fuel-cell LS by 2017

Toyota's Fuel Cell System will certainly migrate to other vehicles in the carmaker's lineup, but Australian car site Motoring reports that one of the models at the head of the queue is the Lexus LS. According to its sources, the executive barge powered by hydrogen will be released by 2017 and take the top spot in the range, rolling in above the LS Hybrid. We're told that Toyota engineers will find a way to slide two hydrogen tanks into its bodywork with the same general setup as on the Mirai – one under the rear seats and another under the rear parcel shelf. The 150-kW fuel cell stack will be placed under the front seats. Motoring says the resulting sedan and its 220-kW electric motor would come in "at around 2,100 kg," which is 4,620 pounds; that's a ginormous 539 pounds less than the listed curb weight of the current LS Hybrid, and 387 pounds more than the standard LS. Assuming all goes as planned, it would have a range of roughly 238 miles, a few dozens less than the Mirai's range of about 300 miles. It would look slightly different, too, the front end getting larger intakes to cool the power unit. It wouldn't surprise us if Lexus does have a hydrogen LS planned – it would be a statement car, and the company likes making statements, even if few heed them; it has stuck with its LS 600h for the past seven years, yet of the 7,539 LS models sold through the end of November this year, only 61 of them were hybrids. The timing would be intriguing, however; by the time the LS hybrid came out, Lexus had already worked over its filet-and-potatoes models. And if the hydrogen version is going to come in above the $120,440 hybrid, well, that will be a statement indeed.

Why is there a huge bulge in 2021 Lexus IS 300 AWD's driver footwell? We explain

After an initial turn a few weeks ago for the 2021 Lexus IS first drive review, the revised luxury sedan has returned to the Autoblog garage for a second look. This middle-of-the-road IS 300 AWD pairs a 260-horsepower V6 with a six-speed automatic transmission and four driven wheels, and frankly it's the least interesting way to spec out the redesigned sedan. While there are cars in this segment designed to get a performance boost from their all-wheel-drive systems even in dry conditions, the IS isn't one of them. Adding insult to injury, you get stuck with a cramped driver-side footwell care of the engineering shenanigans that went into making this system possible.  While we've mentioned this particular compromise before, we rarely touch on the reasons why it exists in the first place. The fundamentals are fairly obvious; the standard IS utilizes a longitudinal, rear-wheel-drive powertrain. As is typical with this configuration, the transmission sits in a tunnel beneath the center console. This arrangement works just fine, provided you don't need to power the front wheels.  To do so in a traditional car like the IS requires a literal end-around maneuver involving the engine and transmission, which we've diagrammed for you below care of MSPaint. This is a bit simplified for the sake of this write-up, and it should be noted that this is not the only way to implement AWD in an inherently RWD platform, but it illustrates how the power for the front axle (red) and rear axle (blue) flows from the transmission to the drive wheels. To get juice flowing to the front axle, Lexus had to add a parallel output shaft, exiting the transmission from the front with enough clearance for the bell housing and engine, which sits between the transmission and the front differential. This requires quite a bit of lateral reach, meaning the housing has to extend much farther out than usual to accommodate it (yellow arrow). As a result, the all-wheel-drive transmission looks a lot like a sci-fi gun with a chunky drum magazine hanging off the side of it. The hump (above right) in the footwell is there to clear this protrusion. This basic configuration isn't unique to Lexus. In fact, if you look at a BMW xDrive cutaway, it's similar. So, why no "hump" in other cars? There are multiple factors, but to boil it down to what is most relevant, it's a combination of the resulting shape of the Lexus transmission housing and the size of the IS chassis.

2013 Lexus LS460 F-Sport AWD

Gary Approved
There's a guy that goes to my gym who can't get enough of the Lexus LS - let's call him Gary. Gary's the guy - you've probably got one at your gym, or coffee shop, or some other public but quasi-social location - who talks to everyone he meets. Sit next to him on the rowing machine or run by him on the track, and he's almost certainly going to bend your ear for a minute or 20. Gary is in his mid-60s, a business owner, and the super-proud owner of a 2013 Lexus LS.
Not being a shy man, Gary will be the first one to tell you that he didn't do much comparative shopping (he "drove by" the BMW dealership, and looked at a 7 Series "on the computer"). Being a satisfied former owner of multiple Lexus RXs, there was probably only a tiny statistical chance that Gary wouldn't end up in an LS when it came time for him to treat himself to the tricked out luxury car that he'd wanted for a long time. Still, when I found myself chatting with Gary about his new LS, right after I had spent a wintry week in the 2013 LS460 F-Sport AWD, I figured that he'd have some light to shed on the car.