2009 Lexus Rx 350 Fwd 4dr on 2040-cars

Auto blog

Lexus planning a hydrogen fuel-cell LS by 2017

Toyota's Fuel Cell System will certainly migrate to other vehicles in the carmaker's lineup, but Australian car site Motoring reports that one of the models at the head of the queue is the Lexus LS. According to its sources, the executive barge powered by hydrogen will be released by 2017 and take the top spot in the range, rolling in above the LS Hybrid. We're told that Toyota engineers will find a way to slide two hydrogen tanks into its bodywork with the same general setup as on the Mirai – one under the rear seats and another under the rear parcel shelf. The 150-kW fuel cell stack will be placed under the front seats. Motoring says the resulting sedan and its 220-kW electric motor would come in "at around 2,100 kg," which is 4,620 pounds; that's a ginormous 539 pounds less than the listed curb weight of the current LS Hybrid, and 387 pounds more than the standard LS. Assuming all goes as planned, it would have a range of roughly 238 miles, a few dozens less than the Mirai's range of about 300 miles. It would look slightly different, too, the front end getting larger intakes to cool the power unit. It wouldn't surprise us if Lexus does have a hydrogen LS planned – it would be a statement car, and the company likes making statements, even if few heed them; it has stuck with its LS 600h for the past seven years, yet of the 7,539 LS models sold through the end of November this year, only 61 of them were hybrids. The timing would be intriguing, however; by the time the LS hybrid came out, Lexus had already worked over its filet-and-potatoes models. And if the hydrogen version is going to come in above the $120,440 hybrid, well, that will be a statement indeed.

Toyota will bring Lexus-based Platform 3.0 autonomous vehicle to CES

The Toyota Research Institute says it will bring its next-generation Platform 3.0 automated driving vehicle to CES next week, an autonomous test car that is notable for incorporating the sensors and cameras into the body, rather than as ungainly attachments, and with the spinning LIDAR rooftop sensor replaced by a more sleek panel of sensors. Platform 3.0 is built on a Lexus LS600hL. Toyota Research Institute says it enlisted CALTY Design Research in Ann Arbor, Mich. and engineers at Toyota's nearby North America R&D center to conceal the equipment. As a result, Platform 3.0 gets a new rooftop weather and temperature proof panel, which it says was inspired by off-road motorcycle helmets, integrated into the available space in the sunroof compartment to minimize height. It's also embellished with chrome trim along the side, where it meets the roofline, and the rear swoops down to integrate with the LS's contour lines. The team also managed to consolidate computational electronics and wiring into a small box in the trunk. Toyota says the Platform 3.0 is one of the most perceptive autonomous test vehicles on the road today, with a design makes the test vehicle easy to build at scale. It gets a Luminar LIDAR system boasting a 200-meter, 360-degree range (the previous version only tracked the forward direction), enabled by four high-res LIDAR scanning heads that help it better see dark objects. Shorter-range LIDAR sensors feature low on all four sides of the vehicle, one on each front quarter panel and on the front and rear bumpers, to detect low-level and smaller objects, like children or road debris. Production begins this spring at the Toyota Motor North America R&D headquarters at low volumes to allow for flexibility, given the rapid rate of development of Toyota's autonomous test platforms. Some will be assembled using Toyota's Guardian dual-cockpit control layout to allow for transferring control between a human test driver and the automated system while keeping the driver as a backup, while the single-cockpit, fully autonomous Chauffeur mode will be shown at CES starting Jan. 9.Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Least favorite vehicles of 2017

Lexus resurrecting SC name for big, expensive coupe

Lexus is preparing the SC nomenclature for its third act, after the first bombshell SC coupe from 1991 and the second, Desperate Housewives hardtop convertible evolution from 2001. The brand is aiming again for something that makes a deep mark, with rumored specs pointing to a large, heavy, powerful coupe that will square its spindle grille up against the Mercedes SL and BMW 6 Series. It will be built on the frame of the next-generation LS sedan, and Automobile says internal combustion motivation will come in three flavors. The starter will be a juiced-up version of the company's 5.0-liter, naturally aspirated V8, the one that currently makes 467 horsepower in the RC F. Stepping up from there will be some kind of hybrid powertrain good for around 500 horsepower; last year Motor Trend wrote that the hybrid would be based around a V6 ICE with Toyota's coming "multi-hybrid" system. The top step will be a twin-turbo version of the V8 that could exceed 600 hp. Early reports of dimensions have it at 185 inches long, 75 inches wide, and 53 inches tall. It is expected to use the world's first application of a ten-speed automatic transmission. It'll also get the RC F's torque vectoring mechanism for the rear-wheel-drive setup, though Car and Driver says an all-wheel drive option "might be added later." Aluminum and carbon fiber components will help manage weight. Its design will be inspired by the LF-LC concept, and right now its pricing is as murky as its looks. C/D posits an MSRP from $80,000 to $95,000, Automobile figures it will go "past the $100,000 mark," and MT pegs the situation at $150,000. All agree, however, that it will join the retail pipeline as a 2017 model.