1990 Lexus Ls400 Base Sedan 4-door 4.0l - Low Mileage And Extra Parts! on 2040-cars

Auto blog

Toyota develops new pre-collision system with steering assist

A number of automakers are working on developing fully autonomous cars, but it looks like the groundwork for such technologies will likely show up first as semi-autonomous systems for both safety and convenience. Following recent announcements from Nissan and Ford in this area, Toyota has now released information for some of its advanced semi-autonomous technologies that could be offered in production cars over the next few years.
On the safety front, Toyota's new pre-collision system with pedestrian-avoidance steering assist is aimed at protecting the folks who aren't in the car. This system combines visual and audible alerts with automatic brake assist and automatic steering. If warnings don't get the driver to slow down, the brake assist kicks in if a collision is very likely, but if that is still not able to avoid the impending collision (and if there is enough room to do so), the car can automatically steer itself around the pedestrian. This sounds most beneficial for last-second dangers such as a person accidently stepping out into the road in front of a car. Toyota hopes to have this technology available to customers by 2015.
The Japanese automaker is also testing a suite of technologies called Automated Highway Driving Assist (AHDA). The key part of this is a new adaptive cruise control system that uses vehicle-to-vehicle (V2V) communications rather than a radar-based system. This cooperative-adaptive cruise control allows vehicles to communicate their acceleration and deceleration data with other cars, which Toyota says this helps to improve fuel efficiency and traffic flow. Also a part of AHDA is the Lane Trace Control feature, which sounds like a next-gen lane keep assist. This system uses cameras, radar and a computer to keep the vehicle in a "smooth driving line" by being able to change steering angle, engine torque and braking force. Toyota says this technology could be in place by the "mid-2010s."

Post-earthquake, Toyota prepares to reopen some plants in Japan

Toyota will restart vehicle production at most of its closed factories in Japan next week, but the factories that build the Mirai and many Lexus models will remain closed through at least April 28 and possibly longer. The earthquakes around the city of Kumamoto on the island of Kyushu forced the automaker to stop most of its assembly throughout the country due to a lack of parts supply. Toyota will reopen the plants in phases from April 25 to 28. However, the Motomachi factory with its LFA works, which makes the Mirai, and the Miyata factory will remain closed. These sites also build the Lexus NX, RX, ES, GS, and CT, according to Toyota. The automaker didn't say when production would begin again or how this would affect vehicle supply. "In the update, we received this morning from TMC, they said that at this stage it is too soon to tell what the impact on production will be, so we can't say yet whether there might be vehicle shortages in the US," spokesperson Aaron Fowles told Autoblog. While the quakes were focused on Kyushu, they damaged Aisin Seiki factories, which supplied parts to Toyota plants across the country. The automaker worked with its partner to import the necessary components from China and Mexico, and Aisin started moving molds from the damaged plants to operational ones in Japan, which gets production under way sooner. Automotive News Europe estimates the week of lost production cuts total assembly by 90,000 vehicles. It could cost Toyota the equivalent of $458.2 million to $641.5 million. The company could make up some of the losses through overtime. Toyota says these plans are subject to change because on ongoing tremors in the region, which could cause more damage. Reuters reported there was a magnitude 5.5 aftershock in the Kumamoto area on April 19. So far, the quakes have killed at least 47 people and around 100,000 people have moved to evacuation centers. Toyota to Restart Production on Vehicle Assembly Lines in Japan from April 25 Apr. 20, 2016 Toyota City, Japan, April 20, 2016-Between April 25 and 28, Toyota will restart production on most of its vehicle assembly lines in Japan. On April 17, Toyota announced that, due to parts shortages resulting from the severe earthquakes that struck Japan's island of Kyushu last week, production would be suspended on almost all of its vehicle assembly lines in stages between April 18 and 23.

Lexus LF-Z Electrified previews future Lexus hybrids and EVs

While the company has yet to release a fully electric car or even plug-in hybrid in the U.S., the company is adamant that it's ramping up electric plans. One way it's doing this is with concept cars, and the latest is the Lexus LF-Z Electrified, just in case you forgot what powers it before the middle of this sentence. It's not a specific preview of any particular model, but is meant as a hint of a series of, well, electrified Lexus models coming in the next few years. The LF-Z is a clear evolution of the LF-30 Electrified concept from the 2019 Tokyo Motor Show. Like that concept, the front of the car effectively inverts the current Lexus grille design, with the "spindle" section in the middle being solid, and the area on either side covered with dark translucent panels that evoke open areas. The whole body is more crisp and creased than the LF-30, and it looks a little more grounded in reality. It has four conventional doors with actual door handles, the proportions are closer to a sedan or fastback, and a seemingly conventional taillight bar. But getting up close reveals many intricate details such as the cubic shapes in the front fascia, the frilled edges of the front fender flares, and the narrow breaks in the lighting. The interior is ultra-minimalist, with all the display systems placed around the driver, and a simple dash that wraps around to the doors and the rear seats. The seats themselves have a similarly geometric design to the exterior, and the choice to highlight the driver seat in a contrasting upholstery is interesting. Likely because the LF-Z doesn't preview any specific upcoming model, Lexus offered nearly no details about what powers the concept beyond electricity. It has the batteries mounted in the floor, and it features dual motors, one for the front wheels and one for the rear wheels, which isn't particularly remarkable. No range or power numbers were given. Steering is done by-wire, kind of like what you'll find in certain modern Infinitis, and the car features other bits of technology that are already available or coming soon to production cars such as augmented reality displays, a smartphone key system, electrochromic roof glass and reclining rear seats. Still, we think it's a distinctive concept car that could spawn some similarly distinct production cars. Lexus announced that between now and 2025, it will launch more than 10 new electrified models as conventional hybrids, plug-in hybrids or fully electric cars.