2011 Used Lexus Gx460 4.6l V8 32v 4wd Suv Premium on 2040-cars

Auto blog

Toyota Camry, Lexus RX to get aluminum parts

Ah, aluminum. The lightweight, strong material has long held a following within the premium ranks, but as Ford prepares to launch an aluminum F-150, the material is gaining acceptance among more mainstream automakers. Toyota is one such brand, with a new report indicating that the Japanese giant will add aluminum bits and bobs to some of its upcoming vehicles.
These won't be full, aluminum-intensive treatments like the F-150, however. Automotive News reports that an aluminum hood and liftgate will be coming to the 2016 Lexus RX, and following that, the Camry will get a bonnet built from Element 13 for model year 2018.
As AN points out, Toyota is no stranger to aluminum, using it in Japanese-built models like the Prius and Scion FR-S. The RX and Camry, though, will mark the first time the company's North American factories will use the material, and they'll do so on a significantly larger scale, owing to the higher volumes that the Camry and RX represent.

Lexus Bladescan is another new headlight safety breakthrough U.S. won't get

Lexus is back at it with innovative lighting technology. The BladeScan headlights available in Europe on the 2020 RX utilize a new mechanism for throwing light further down the road, aiming that light more precisely, and doing so without blinding other road users. Lights from other OEMs with the same capabilities have increased the number of LEDs inside the housing for finer control. The BladeScan module inside the Lexus lights holds the number of LEDs down to 10 on each side of the RX, which Lexus says is a more cost-effective solution. In fact, BladeScan uses fewer LEDs than Lexus' most recent adaptive high-beam system, which has 24 LEDs on each side. The LEDs in the new module are arranged in two rows, eight on top, two on bottom. The diodes are fed information about objects ahead, and adjust their intensity to dim light aimed at an oncoming car, or illuminate a pedestrian by the roadside. However, the LEDs don't shine their light down the road, they shine their strobing light onto two blade-shaped mirrors — hence the name BladeScan — that rotate at high speed. The light reflects off the mirrored blades and into a lens, which orients the beam down the road. Not only is the reflected light easier to handle for oncoming drivers, the system has aim accurate to 0.7 degrees. Lexus' current adaptives are accurate to 1.7 degrees, making BladeScan a 143-percent improvement. That means the new feature can throw even more light into areas that are hard to reach with current lights — Lexus says pedestrian recognition at night has increased from 105 feet to 184 feet. Buyers of the 2020 RX will be able to take advantage when the new crossover goes on sale in Europe later this year. Naturally, U.S. Federal Motor Vehicle Safety Standard No. 108 means we won't get BladeScan — that goes for you, too, Canada. The now-52-year-old U.S. law mandates a single low beam and a single high beam setting, with no intermediate settings and no activation of high and low beams simultaneously. Toyota, Audi and BMW have been trying for six years to get FMVSS 108 changed to permit new and potentially lifesaving headlight technologies. The automaker wrote in a statement to Carscoops, "Last December, Lexus submitted a petition to NHTSA to allow ADB in the United States. Currently, we await the Agency's decision and hope to see an amendment in FMVSS 108."

Lexus LFA prototype spied lapping the Nurburgring with new bodywork

The Lexus LFA was a real engineering tour de force. Sure, it was stuck in development hell for years, and the 4.8-liter V10's 552-horsepower output wasn't super impressive when it came out, but it integrated a ton of expertise Toyota gained from its F1 team in the early to mid 2000s. Unfortunately, it didn't sell well. Last year, we found there were a few new models sitting on dealer lots, five years after the 500-model run ended. Still, it looks like Toyota may not have given up on the idea of a race-derived flagship for Lexus, at least based on this prototype running around the Nurburgring this week. At first glance, the car pictured here looks like an LFA with the Nurburgring Package and some camouflage on the front and rear fenders. If you look closely, you can see that the fenders are significantly wider than on the standard LFA. Based on the license plate, this appears to be the same car with two different sets of wheels. Lexus may simply be swapping out worn tires, or they may be testing different wheel and tire combinations to fit the wider wheel wells. Anything beyond this is just speculation. There have been rumors of a new flagship Lexus sports car that sits atop the LC 500 and LC 500h. We saw the Toyota GR Super Sport Concept back in January, though that car looks nothing like what we see here. As much as we would love that sweet Yamaha co-developed V10 to carry over, we're not holding our breath. Some sort of hybrid powertrain is almost a certainty. Maybe Lexus and Toyota could pull some tech from its Le Mans-winning TS050 Hybrid race car. Related Video: