2002 Lexus Es 300 Sedan Gold on 2040-cars

Auto blog

Genesis wins J.D. Power Tech Experience Study for third straight time

The results are out for the J.D. Power 2023 U.S. Tech Experience Index (TXI) Study, which "focuses on the user experience with advanced vehicle technology as it first comes to market and is an early measure of problems encountered by vehicle owners." Its measurement metric is problems per 100 vehicles (PP100), same as with the J.D. Power Initial Quality Study (IQS). The takeaway this year isn't that owners aren't using advanced technologies, as was the case with the 2022 study, or that they're having more problems with them overall. It's that owners of battery-electric vehicles are having more problems with advanced tech than owners of ICE-powered vehicles. According to the study, 17 of 21 features that can be had on both propulsion types — such as remote parking assistance and gesture controls — get lower satisfaction ratings by owners of BEVs, in some cases nearly 20 PP100.  The survey organization says this tracks with what its found in the IQS, where total vehicle problems were "46% higher among BEVs (excluding Tesla) than ICE vehicles and satisfaction is lower among owners of BEVs across nine of 10 APEAL categories than among owners of ICE vehicles." Findings regarding biometric measurements are among those that go against the overall study findings. Whether a fingerprint reader or an eye tracker, car owners in general said "they do not consider them to be useful." In terms of ease-of-use and satisfaction, plug-and-charge capability on EVs gets good marks. This allows EV owners to plug into a public charger and have payment taken care of automatically; the vehicle communicates with any charging station compatible with an automaker's plug-and-play system, so the vehicle can automatically submit a bill for the charging session to a central owner account with no further action needed at the station. Survey respondents noted a mere 6 PP100 and an 88.9% satisfaction.    Among manufacturers, repeat winners took the top prizes. Genesis earned the highest rank for innovation overall and among premium brands for the third straight year. Hyundai not only won the tech innovation banner for mass market brands for the fourth straight year, ahead of Kia, GMC, Ram and Subaru, Hyundai finished in second in the overall standings. On that overall chart, the top five are Genesis, Hyundai, Cadillac, Lexus and BMW. On the premium chart, Genesis is followed by Cadillac, Lexus, BMW and Mercedes-Benz in the top five. It wasn't close from the first to the rest, though.

Toyota twin-turbo V8 patent unearthed

An unremarkable patent focusing on a minor engine part has revealed that Toyota is at least considering a twin-turbo V8. While the filing is most likely just a large company protecting its intellectual property, it could also be a small glimmer of hope that Toyota, a storied company that's made some glaring missteps with enthusiasts in recent years, can leave the ICE party with a bang for the ages. The patent for a secondary PCV separator, whose function is to isolate exhaust gas from lubricating oil, was discovered by a member of the GR86 forum. In this case, it's not engine oil that's the culprit, but turbocharger oil. From a twin-turbo V8. The patent starts out with an almost embarrassingly hilarious stick figure drawing of a car and where said engine would be located (in the front, under the hood, duh). It has the words "Internal Combustion Engine" printed on a rectangle in case there was any doubt. However, the second figure shows a dual turbo setup nestled in the valley of a V8. It's a prime location for reducing turbo lag and optimizing throttle response (and should necessitate a substantial hood bulge as well). Now, interestingly, the forum member believes this engine will be installed in the next Tundra (and presumably Sequoia), but our own research indicates that the pickup will have a 3.5-liter twin-turbo V6 under the hood. With all due respect to the GR86 members, we're going to stand by that assertion and cross our fingers that the patent hints at something even better. That would be a high-performance Lexus, possibly an IS F or, if the ICE gods will allow it, an LC F. After all, we have had reports from Japan that a trio of F-cars were coming, including a LS F. It would explain why the 472-horsepower, V8-powered IS 500 was called the Sport Performance instead of full-on IS F. In fact, Lexus reps have promised that the F label would become even more performance oriented. A proper IS F would be a fitting sendoff to Toyota's high-performance V8, but the tested, then reportedly canceled, then reportedly revived LC F would be an even more melodious swan song. The flagship grand tourer could very well allow loyalists to forgive the aforementioned gaffes. Toyota president and noted car guy Akio Toyoda has taken heat for questioning the coming outright ban of ICE sales in his home country of Japan. Perhaps this engine is one of the reasons he's objecting.

Lexus lets enthusiasts build their own LFA to celebrate model's 10th birthday

Lexus launched production of the LFA, a limited-edition supercar still venerated in 2020, in December 2010. While fans would undoubtedly love to see a second-generation model to mark the occasion, the Japanese firm is celebrating 10 years of LFA production by releasing a paper model that enthusiasts can print and build at home. 500 units of the life-sized LFA were made by hand in Japan between 2010 and 2012. The paper model will be hand-made, too, but builders need to arm themselves with scissors and glue instead of wrenches, and production isn't limited. Anyone can print out the templates (which are included in our gallery) and put the car together. Lexus released four templates: one is blue, one is orange, one is white and one wears the colors of the Gazoo Racing team. Building each car is fairly straight-forward, and basic instructions are shown in our gallery. Lexus estimates assembly takes about an hour and a half, and it suggests folding the paper against a ruler to create a perfectly straight edge. It also notes builders should print out each template on A3 paper to make a bigger car. Full building instructions are published on the Lexus United Kingdom media site. Folks who make their own LFA at home are encouraged to share their creation by tagging the brand on its social media channels. We'll award bonus points to anyone that manages to make a paper version of the naturally-aspirated 4.8-liter V10 engine. As for a second-generation model, our advice is not to hold your breath. Lexus is focusing on other projects, like developing electric powertrains, and it doesn't sound like a follow-up to the LFA is high on the company's list of priorities. It hasn't been ruled out, however. "I love it, but we need your help. We need strong requests for a new LFA from the media. This can help us proceed," vice president Koji Sato told British magazine Autocar in 2019. Related Video: