2012 Land Rover Range Rover Sport 4wd 4dr Sc Autobiography on 2040-cars

Auto blog

Jaguar Land Rover to drop supercharged V8 for turbocharged BMW power

There are few things that sound as good as Jaguar's 5.0 liter supercharged V8. As great as it is when the supercharger whines or the exhaust cracks and pops on throttle lift-off as the air pressure equalizes, the basic design dates back to the '90s. Plainly, the engine isn't as efficient as it needs to be, but designing a new V8 from the ground up is an expensive proposition. Instead, Automobile reports that Jaguar Land Rover is set to use a twin-turbocharged V8s supplied by BMW. Scalable architecture is all the rage as automakers streamline designs in order to save costs. For example, Jaguar's current supercharged V6 is quite literally a V8 with two holes missing. They didn't even change the length of the block. It seems both of those designs are on their way out, with the V6 being replaced by a inline-six closely related to the company's inline four. It seems that rather than designing an new and expensive V8 for their top of the line models JLR, is sourcing from BMW. From 1994 to 2000, BMW owned Land Rover. A few models, including the Land Rover Range Rover, used BMW engines then and in the initial years of Ford's JLR stewardship. It seems things have now come full circle. BMW currently makes a twin-turbo 4.4 liter V8 that produces anywhere from 440 to 600 horsepower, depending on the application. Automobile says that a new 4.0 liter V8 is in the works and that it will most likely be the engine that JLR uses. Expect it to be more powerful, more fuel efficient, and lighter than what both BMW and JLR currently offer. This seems like a win for both companies. BMW gets to offset the cost of a new motor while JLR, a smaller company, doesn't have to invest in a whole new architecture. As automakers search for ways to cut costs, expect collaborations like this to continue. Infiniti and Mercedes-Benz both share a four-cylinder engine. Ford and GM have worked together to design a shared 10-speed automatic. While we may lament the loss of that wonderful Jaguar Land Rover engine, we can still be happy that they haven't abandoned the V8. Related Video: News Source: Automobile Rumormill BMW Jaguar Land Rover

Jaguar Land Rover exploring 3D HUD and infotainment projections

With its most recent technology research, Jaguar Land Rover (JLR) is exploring the use of 3D projections for a world before and/or after autonomous vehicles come to fruition. In collaboration with the United Kingdom's University of Cambridge, JLR has developed concepts for a 3D head-up display that shows information on the road ahead and a system that projects personalized 3D infotainment for vehicle passengers.  As of right now, hundreds of production vehicles are equipped with two-dimensional head-up displays, some color, others black and white. Using various techniques and different technologies, manufacturers display information in a flat image in front of a driver. Some might find it distracting or unhelpful to have this in the driver's line of sight, and JLR might have found a solution. Rather than wedge the information in between the person and the view ahead, a 3D system that uses augmented reality could display the info onto the road in front of the driver. JLR thinks the system could project navigation directions, safety alerts such as lane departure, hazard detection or other bits typically found in a car's infotainment or instrument cluster. Some might find this to be even more distracting that 2D head-up displays, but to each his or her own. While the 3D head-up display is something that could be used right now, if it were released and passed legal, part two of JLR's 3D technology research is imagined for a life where truly autonomous vehicles are skating across the country. Using head- and eye-tracking technology, the system could lock into the position of numerous people in a vehicle and give each of them a personalized 3D projection "screen." This could be used to track a trip, look up points of interest, or even watch movies. JLR points out this could be used during ride-sharing without bothering others in the vehicle. The work with the Center for Advanced Photonics and Electronics at Cambridge is still in development for now, but it's only a matter of time before 3D tech makes it into cars in some degree.

Jaguar Land Rover to badge vehicles based on horsepower

Add Jaguar and Land Rover to the list of automakers changing their nomenclature due to the realities of engine downsizing. Spy photos of an unreleased Jaguar F-Type model show a badge reading P380 AWD. The letter P evidently refers to Petrol (British for gasoline), and 380 is the engine's horsepower. According to Auto Express, the entry-level F-Type will be badged P300, indicating the power output of its 2.0-liter turbocharged four-cylinder engine. Land Rover is expected to follow suit with the new badging nomenclature. Diesel models will get a D instead of a P, while electric and hybrid models will get an E badge, along with a number corresponding to total system power. So, expect the I-Pace to sport an E400 badge on its hind end. One question we have, though, is how the disparity between mechanical, metric and imperial horsepower will be dealt with. While such power-specific badges are arguably unnecessary, we expect the trend to proliferate as engines continue to get smaller but turbocharging and electrification keep horsepower climbing. At least JLR's badges are easier to understand than the messy way Audi plans to rename its models or the way BMW completely dismisses actual engine size in its naming convention. Related Video: News Source: Auto ExpressImage Credit: Simon Dawson/Bloomberg via Getty Design/Style Green Jaguar Land Rover Convertible Crossover Hatchback SUV Wagon Luxury Performance Sedan jaguar land rover