2012 Range Rover Evoque Pure Premium Navigation Surround Camera Climate 2013 on 2040-cars

Auto blog

Jaguar Land Rover to drop supercharged V8 for turbocharged BMW power

There are few things that sound as good as Jaguar's 5.0 liter supercharged V8. As great as it is when the supercharger whines or the exhaust cracks and pops on throttle lift-off as the air pressure equalizes, the basic design dates back to the '90s. Plainly, the engine isn't as efficient as it needs to be, but designing a new V8 from the ground up is an expensive proposition. Instead, Automobile reports that Jaguar Land Rover is set to use a twin-turbocharged V8s supplied by BMW. Scalable architecture is all the rage as automakers streamline designs in order to save costs. For example, Jaguar's current supercharged V6 is quite literally a V8 with two holes missing. They didn't even change the length of the block. It seems both of those designs are on their way out, with the V6 being replaced by a inline-six closely related to the company's inline four. It seems that rather than designing an new and expensive V8 for their top of the line models JLR, is sourcing from BMW. From 1994 to 2000, BMW owned Land Rover. A few models, including the Land Rover Range Rover, used BMW engines then and in the initial years of Ford's JLR stewardship. It seems things have now come full circle. BMW currently makes a twin-turbo 4.4 liter V8 that produces anywhere from 440 to 600 horsepower, depending on the application. Automobile says that a new 4.0 liter V8 is in the works and that it will most likely be the engine that JLR uses. Expect it to be more powerful, more fuel efficient, and lighter than what both BMW and JLR currently offer. This seems like a win for both companies. BMW gets to offset the cost of a new motor while JLR, a smaller company, doesn't have to invest in a whole new architecture. As automakers search for ways to cut costs, expect collaborations like this to continue. Infiniti and Mercedes-Benz both share a four-cylinder engine. Ford and GM have worked together to design a shared 10-speed automatic. While we may lament the loss of that wonderful Jaguar Land Rover engine, we can still be happy that they haven't abandoned the V8. Related Video: News Source: Automobile Rumormill BMW Jaguar Land Rover

The UK votes for Brexit and it will impact automakers

It's the first morning after the United Kingdom voted for what's become known as Brexit – that is, to leave the European Union and its tariff-free internal market. Now begins a two-year process in which the UK will have to negotiate with the rest of the EU trading bloc, which is its largest export market, about many things. One of them may be tariffs, and that could severely impact any automaker that builds cars in the UK. This doesn't just mean companies that you think of as British, like Mini and Jaguar. Both of those automakers are owned by foreign companies, incidentally. Mini and Rolls-Royce are owned by BMW, Jaguar and Land Rover by Tata Motors of India, and Bentley by the VW Group. Many other automakers produce cars in the UK for sale within that country and also export to the EU. Tariffs could damage the profits of each of these companies, and perhaps cause them to shift manufacturing out of the UK, significantly damaging the country's resurgent manufacturing industry. Autonews Europe dug up some interesting numbers on that last point. Nissan, the country's second-largest auto producer, builds 475k or so cars in the UK but the vast majority are sent abroad. Toyota built 190k cars last year in Britain, of which 75 percent went to the EU and just 10 percent were sold in the country. Investors are skittish at the news. The value of the pound sterling has plummeted by 8 percent as of this writing, at one point yesterday reaching levels not seen since 1985. Shares at Tata Motors, which counts Jaguar and Land Rover as bright jewels in its portfolio, were off by nearly 12 percent according to Autonews Europe. So what happens next? No one's terribly sure, although the feeling seems to be that the jilted EU will impost tariffs of up to 10 percent on UK exports. It's likely that the UK will reciprocate, and thus it'll be more expensive to buy a European-made car in the UK. Both situations will likely negatively affect the country, as both production of new cars and sales to UK consumers will both fall. Evercore Automotive Research figures the combined damage will be roughly $9b in lost profits to automakers, and an as-of-yet unquantified impact on auto production jobs. Perhaps the EU's leaders in Brussels will be in a better mood in two years, and the process won't devolve into a trade war. In the immediate wake of the Brexit vote, though, the mood is grim, the EU leadership is angry, and investors are spooked.

Jaguar Land Rover offers (some) detail about new Ingenium engine

Jaguar Land Rover officially announced its Ingenium family of engines with the unveiling of the 2.0-liter version in the Jaguar XE concept at the 2014 Geneva Motor Show, but it kept details very thin at the time. All we knew was that the new turbocharged mills could be configured to use gasoline or diesel, and be positioned longitudinally or transversely. Months later, JLR is finally letting some more info slip about its new baby, but there are still some big questions to be answered.
For the Ingenium project, Jaguar Land Rover gave its engineers a clean sheet of paper and told them not to worry about using any previous parts or machinery. In the end, the designers came up with a family of turbocharged, aluminum-block engines based around modular, 500cc cylinders to allow it to grow or shrink as the market demanded. The layout was also made adaptable enough to incorporate hybrid drivetrains, if needed. "Being configurable and flexible are the two key strands of Ingenium's DNA because we have future-proofed our new engines from the outset," said said Ron Lee, the company's director of Powertrain Engineering.
To maximize efficiency, Jaguar promises that all versions of the Ingenium engines come with computer-controlled, variable oil pumps and water pumps to use only as much energy as needed. They also get direct injection, roller bearings for the cams and stop/start. The diesel version alone has 17 percent less internal friction than the mill it replaces, the company claims. JLR is also promising class-leading figures for Ingenium's torque and horsepower too, but it's not giving away those specs just yet.