2009 Lamborghini Lp640 147 Murcielago, Only 5k Miles, E-gear, Transparent Bonnet on 2040-cars

Auto blog

Lamborghini Huracan LP580-2 is a purist's RWD, 571-hp dream

Purists rejoice: Lamborghini has revealed the new Huracan LP580-2, ditching the all-wheel drive system for a rear-drive setup and a slight decrease in power. Like the previous Gallardo LP550-2 (and Balboni edition) before it, the Huracan LP580-2 is based on the same technologies as the LP610-4 coupe and Spyder. Instead of 602 horsepower and 413 pound-feet of torque, it produces 571 hp and 398 lb-ft to the rear wheels through the same seven-speed dual-clutch gearbox. Some might balk at the lack of availability of a manual transmission, but Lamborghini figures few (if any) would have ordered one that way at any rate. What the new setup means is more tail-happy handling, which the engineers in Sant'Agata have only encouraged that through specific tuning of the electronic systems. Equally as important is a lower dry weight of 3,062 pounds – 73 fewer than the all-wheel-drive coupe. To set the rear-drive version apart from its AWD counterpart, Lamborghini has restyled the front and rear ends and anchored it to the road on staggered 19-inch wheels coated in Pirelli PZero rubber. Aluminum calipers grip steel (instead of carbon-ceramic) rotors to keep it all in check. In measurable terms, that all comes down to a 0-62 time quoted at 3.4 seconds and a top speed at 199 miles per hour - respectively 0.2 seconds and 3 mph slower than the LP610-4. But the LP580-2 isn't about outright pace or bragging rights. Those are best left to the more potent and grippy model, and to the yet more powerful versions that are sure to follow. In the meantime, we can look forward to the getting a closer look at the latest version of the Huracan in the flesh at the LA Auto Show. Related Video: The rear-wheel drive Lamborghini Huracan LP 580-2: the essence of driving fun - New dynamic design of front and rear - Designed and engineered to provide perfect rear-wheel driving fun - Weight reduction with recalibrated power management for highly-involving driver experience - 0-100km/h in 3.4 seconds, top speed of 320 km/h Sant'Agata Bolognese/LA, 17 November 2015 – Automobili Lamborghini presents the Lamborghini Huracan LP 580-2: a two-wheel drive version of the Huracan coupe. Specifically designed and engineered for its rear-wheel drive set-up, the Huracan LP 580-2's combines dynamic new looks with a package for an enhanced Lamborghini driving emotion.

Actor Eric Bana returning to Bathurst 12 enduro race

Eric Bana joins the field of the 2014 Liqui-Moly Bathurst 12-Hour race next month, driving for the Australian FXD Workwear team. Bana's done the race twice before, coming in tenth overall in 2009 in his Love the Beast Mitsubishi Lancer RS Evo X, posting a DNF in the same car in 2010.
This year he'll be in Class B behind the wheel of a Lamborghini Gallardo GT3 prepared by Racing Incident, joined by teammates Peter Hill and Simon Middleton. The race happens during the weekend of February 7-9, you can find a press release with the announcement below. You'll want to take the time to get to know it this year, because it's been widely reported that Eric Bana will return next year to share a Porsche 911 GT3 with Mark Webber.

Dad 3D-printed a Lamborghini because his son liked one in Forza

Sterling Backus's son only had one question after he drove a Lamborghini Aventador in the XBOX video game Forza: Can we build one? Most dads would respond with a chuckle and some quip about winning the lottery. But not Backus, whose day job is laser physicist. Backus responded, "Sure," and he meant it. As of this week, the replica is capable of driving under its own power. Backus, the chief scientific officer at KMLabs in Boulder, Colorado, and his 11-year-old son dubbed the project "Interceptor," and the build has a budget of about $20,000. Backus hand-built the steel chassis and pulled an LS1 V8 from a Corvette for power. He found the panel layouts through online design community GrabCAD, and then he modified them for 3D printing.  But he ran into a problem: The 3D-printed plastic would melt in the sun. So, he decided to incorporate carbon-fiber encapsulation (shown below), in which he wraps the parts and covers them in epoxy. Piece by piece, he assembled the shape of the supercar using a Creality CR-10 105 desktop 3D printer that he got for about $900 from Amazon. The front brake air intake alone is said to have taken 52 hours to complete. Additional cool features include a gated shifter, functioning lights, and scissor doors.  One of the fun aspects of the whole story is that Backus admits he had some learning to do when it came to the art form of additive engineering. So, he turned to the same place everybody else goes these days: YouTube. The physicist joked that he went to YouTube University and learned by watching videos.  With the end of the project in sight, Backus says he wants the final product to serve as an educational tool for Science Technology, Engineering, Art, and Mathematics (STEAM) programs.  "The intent is to take the car to local schools to show kids how cool technology can be," the project's Facebook page says.  In the words of Jesse Pinkman, "YEAH SCIENCE!"  This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.