Nav + Rr Camera + Shiny Black Apollos + Pwr Seats + Clear Bonnet on 2040-cars

Auto blog

Lamborghini confirms Le Mans Daytona hybrid entry for 2024

Last August, Racer magazine reported that Lamborghini had green-lit a project to put a car in global endurance racing's Le Mans Daytona hybrid (LMDh) class, but wasn't ready to announce it yet. The brand's head of motorsport for the U.S. said at the time that work on a factory endurance program was "90 percent of the way there." Now, the last 10 percent has been completed, and the Sant' Agata Bolognese carmaker announced its LMDh car will start racing in 2024. The class, developed by the U.S. IMSA organization in collaboration with France's ACO, begins competing next year. Here's the refresher on the top to endurance racing categories, LMDh and Le Mans Hypercar (LMH), both of which are allowed to run in the FIA World Endurance Championship and the IMSA WeatherTech SportsCar Championship. LMDh cars use a spec chassis provided by one of four suppliers, Dallara, Ligier, Multimatic or Oreca. LMDh teams can use any engine and electronics they want, but they will all fit a spec hybrid unit supplied by Bosch, a spec lithium-ion battery from Williams Engineering, and a spec gearbox from Xtrac. Max horsepower is limited to about 680. VW sister brand Porsche opted for a Multimatic chassis powered by a turbocharged V8. Sportscar365 believes Lamborghini will buy a Ligier chassis. Since the R8 and its V10 are headed for the dustbin, Lamborghini could use a V8 as well. Every team creates its own bodywork, the limit being a 4:1 ratio of drag to downforce and a single aero package for the year to keep costs down. As the teaser shows, Lamborghinis on the track will be known by their Y-shaped DRL signatures, too.  Audi had been planning an LMDh entry, but dropped out when it confirmed its eventual entry into Formula 1. So for the moment, Lamborghini will join other LMDh manufacturers Acura, Alpine — which will switch from its current LMH car to LMDh in 2024, BMW, Cadillac, and Porsche. That latter brand is also going into F1, but hasn't axed any other programs. The LMH class is based on roadgoing hypercars, a manufacturer required to sell 20 of the retail hypercars over a two-year period to qualify. Although output's capped to around 680 hp as with LMDh, manufacturers can develop their own engines, gearboxes and hybrid systems. Discrete bodywork is allowed, held to the same drag-to-downforce ratio limit. The current LMH entries are Alpine, our own Scuderia Cameron Glickenhaus, and Toyota.

How to change the oil in a Lamborghini Huracan: carefully

There are eight oil drain plugs on the underside of the Lamborghini Huracan. And to even get to those drain plugs, 3 covers and about 50 bolts have to first be removed. Suffice it to say, then, that changing the oil in a supercar like the Huracan is a tedious process. And you won't be taking the car to your local Jiffy Lube. Royal Exotic Cars Fleet Manager Jesse Tang was recently filmed changing the oil in a Huracan that the company uses as a rental vehicle in Las Vegas. "It's kinda an expensive car for you to mess up, so ... we don't want to mess up," he says. And so Tang takes his time, checks to make sure he drains a full nine quarts of oil before buttoning everything back up and pouring fresh dino juice back inside the engine. While it's not quite as complicated or as expensive as changing the oil in a Bugatti Veyron, a drain and refill in the Lamborghini Huracan doesn't look like a job for the average backyard mechanic. But most cars are a whole heck of a lot easier to service. If you want to learn how to change the oil in your own car, we've got you covered – just watch the video down below. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

Lamborghini's path to the future is paved with forged composites

As far back as 1983, Lamborghini has been researching carbon fiber for automotive use. The automaker felt confident enough in its ability to work with the high-tech material in 1985 that a team led by Maurizio Reggiani, now the Lamborghini Board Member in charge of Research and Development, crafted a revolutionary Countach with a chassis made almost entirely of hand-laid carbon fiber. The result was spectacular in that the car's chassis weighed about half of its all-metal counterpart. It turned out that first foray into carbon fiber was just as spectacular when it was finally tested for crashworthiness, but in a completely different way. Catastrophic would be an appropriate word, according to Paolo Feraboli, who now leads Lambo's brand-new Advanced Composite Structures Laboratory in Seattle, Washington. Proving how far Lamborghini has come since that ill-fated carbon-fiber Countach Evoluzione, Feraboli told us during the ACSL's grand opening that today's Aventador, which boasts a high-tech carbon chassis, aced its very first crash test in 2009. Chalk that success up to high-tech computer modeling and the practical application of lessons learned over several decades of trial and error. The dull red monocoque of that crashed Aventador now hangs on the wall at the ACSL like a functional piece of art, a reminder of Lamborghini's cutting-edge milestones of the past. Lamborghini's future will be hewn from what the company calls forged composites. First seen on the stunning Sesto Elemento Concept from the 2010 Paris Motor Show, the patented carbon-forging process forgoes hand-laid sheets, injected resins, and high-heat autoclaves. Instead, wads of randomly oriented carbon fibers that sort of resemble the kind of dough you'd use to make pasta undergo a three-minute press inside a mold. The resulting parts are just as strong as other carbon-fiber bits, but can be mass-produced at a fraction of the cost. While it's true that cost is often a secondary consideration for high-end supercars, it's still relevant. By reducing the cost and increasing the scale of composite pieces, Lamborghini can then afford to spend more money on other parts of the car. It's not just body panels and chassis components that Lamborghini thinks it can build using forged composite technology. The Sesto Elemento featured forged-composite suspension control arms that haven't yet made it into production, but probably will soon.