2018 Jeep Wrangler Rubicon Recon on 2040-cars

Auto blog

Chrysler recalling 630k Jeep models worldwide

Despite its refusal to recall 2.7 million Jeep Grand Cherokee and Liberty models this week over a gas tank fire risk, Chrysler will be recalling 630,000 Jeep Compass (pictured), Patriot and Wrangler vehicles around the globe for a pair of entirely different reasons.
The affected Compass and Patriot models are all from the 2010 to 2012 model years - 254,000 in the United States, 45,400 in Canada and 109,000 elsewhere in the world. In these models, a software error may result in the late deployment of the side airbags and seatbelt tensioners. In the event of a crash, failure of these systems could result in more serious injuries for the vehicle's occupants.
Jeep's go-anywhere Wrangler also faces a separate recall due to power steering fluid lines that can possibly wear a hole in the transmission oil cooler line. According to Chrysler, the vehicles could then leak fluid, possibly damaging the transmissions. Roughly 221,100 Wrangler models are being recalled because of this issue, all of which are fitted with Jeep's 3.6-liter Pentastar V6 engine. In the US, 181,000 vehicles are affected, with an additional 18,400 in Canada and 21,700 additional units worldwide. A Chrysler spokesperson said that no crashes or injuries have been reported with either case, according to the Associated Press.

Jeep spied testing Hellcat-powered Grand Cherokee Trackhawk

The Jeep Grand Cherokee Trackhawk is coming. We know this, because Mike Manley, the head of Jeep, said so. We showed you this brief spy video a while back, but now we have our clearer images of the Trackhawk undergoing testing. And it looks just like a normal Grand Cherokee SRT. Yeah, anti-climactic, we know. The four shots we have show a bit of camo over the front bumper and grille, likely concealing a tweaked design or visible bits of the 6.2-liter, supercharged V8. It looks like there's a rather substantial opening below the upper grille, almost like a ram-air system. There's also a smidge of what looks like tape on the front wheel arches, although this might not mean much of anything. What's interesting is what isn't here. There's no perceivable change to the back of the car. The exhaust pipes look like they're about the same size, there's no noticeable changes to the aerodynamics, and in fact, there's not even any camouflage. Jeep also hasn't updated the Grand Cherokee Trackhawk's hood, which is somewhat surprising considering the changes for every other Hellcat-equipped vehicle (concepts included). You can check out our earliest look at the Trackhawk up top. As for when this monstrous Grand Cherokee will debut, we're expecting it to arrive sometime in 2017, perhaps on FCA's home turf at the Detroit Auto Show. Related Video:

FCA's Pentastar V6 gets more power, efficiency for 2016

Already a vital member of FCA's powertrain lineup, the 3.6-liter Pentastar V6 is receiving major efficiency improvements for 2016. Thanks to a massive amount of new tech attached to the mill, fuel economy is up six percent, and torque below 3,000 rpm jumps nearly 15 percent. The updates arrive first in the 2016 Jeep Grand Cherokee, but they should proliferate to other models eventually. At least in the Grand Cherokee, the tweaks push power up five horsepower to 295 ponies. FCA's engineers went through the Pentastar from top to bottom to eke out as much efficiency as possible. For example, there's now a two-speed variable-valve lift system that can run in low- or high-lift modes. This upgrade is responsible for 2.7-percent better economy, the company claims. A new intake manifold with longer runners and updated variable-valve times also helps boost the torque output. Further improvements come from pushing the compression ratio to 11.3:1, from 10.2:1 before. Perhaps most impressive is that despite all of the innovations, the latest Pentastar actually weighs four pounds less than the current version. Beyond the Pentastar improvements, all of the FCA US gasoline engines, except for the Viper's 8.4-liter V10, will be E15-compatible for 2016. The company says that it wants to be ready for the higher ethanol content fuel's greater use in the near future.